Yealink SIP-T18, SIP-T20, SIP-T12, SIP-T20P, SIP-T18P Configuration Manuals
...
Yealink
IP Phone
Configuration Guides
Yeastar Technology Co., Ltd.
Yealink IP Phone Configuration Guides
www.yeastar.com Page 2
Table of Contents
CONFIGURING WITH MYPBX .............................................. 错误!未定义书签。
REGISTER WITH MYPBX ................................................................................. 3
CONFIGURING BLF ON YEALINK ............................................................... 6
PROVISIONING FOR MYPBX ..................................................................... 8
3.1 PHONE PROVISIONING VIA PNP MODE ............................................................ 9
3.2 PHONE PROVISIONING VIA DHCP MODE ....................................................... 12
Yealink IP Phone Configuration Guides
www.yeastar.com Page 3
Yealink IP phone Configuration
Guides
Manually Configuring a Yealink T12, T18, T18P, T20, T20P, T22, T22P, T26, T26P,
T28, T28P, T32G, T38G, VP530, VP-2009 for MyPBX
Important:
This guide has been tested for Yealink T12, T18, T18P, T20, T20P, T22, T22P, T26,
T26P, T28, T28P, T32G, T38G, VP530, VP-2009 with firmware version X.70.0.60, Be
aware that different firmware revisions may have different web interface formats
and functionality.
The preferred method to configure a Yealink T2X Phone is via Provisioning. You can
however follow this guide to manually configure your phone.
Register with MyPBX manually
1. Start up the phone and identify its IP Address – press the menu key on the
phone, and select the "Settings" option. For this example we will assume the IP
Address of the phone is 192.168.5.126, and IP Address of MyPBX is
192.168.5.150
2. Point your browser to the web interface of the phone: http://192.168.5.126
3. Enter the phone's login username (default "admin") and password (default
"admin").
Figure 1-1
4. Click on the "Account" tab
5. We now need to set the phone to register with MyPBX. Ensure that the
"Account" field is set to "Account 1", and in the "Basic" section, configure as
follows:
Yealink IP Phone Configuration Guides
www.yeastar.com Page 4
Figure 1-2
1) Set the "Account Active" field to "On"
2) Set the "Label" field to the name you want to appear on the Phone
display
3) Set the "Display Name" field to the name you want to appear on
another phone's display when calling other phones
4) Set the "Register Name" field to the extension number you want to
associate with this phone
5) Set the "User Name" field to the extension's Authentication ID
6) Set the "Password" field to the extension's Authentication Password
7) Set the "SIP Server" field to the IP Address of MyPBX – in this example,
192.168.5.150.
8) Set the SIP Server "Port" field to the SIP Port of MyPBX (default "5060")
9) Ensure the "NAT Traversal" field is set to "Disabled"
Yealink IP Phone Configuration Guides
www.yeastar.com Page 5
6. Next, we need to configure the audio codecs. Scroll down to the end of the
"Basic" section, and expand the "Codecs" section. Ensure that the "Enable
codecs" list box contains first "PCMU", then "PCMA", and finally "G729"
Figure 1-3
7. We also need to configure the phone to subscribe for MWI and BLF notifications.
Scroll down to the end of the "Codecs" section, and expand the "Advanced"
section:
1) Set the "Subscribe Register" field to "Enabled"
2) Set the "Subscribe for MWI" field to "Enabled"
Figure 1-4
8. Click the "Confirm" button at the bottom of the page. The phone will now
register with MyPBX. This can be verified via the ―Status" page of MyPBX
Management Console.
Loading...