USB Screen Sharing Adapter
English | 简体中文
Quick Start Guide(V1.2)
www.yealink.com
MShare
Package Contents
7m
MShare
×4
3M
Cable Tie Mounting Base×2
We recommend that you use the accessories provided or approved by Yealink. The use of unapproved
third-party accessories may result in poor performance.
USB Cable
Cable Ties×2
1.2m
HDMI Cable
(for content sharing) (for content sharing)
Velcro×2
1.2m
Mini-DP Cable
MShare
Quick Start Guide
MShare Connection
The Front of MShare
MINI DP HDMI
(for wired sharing)
PC
Wireless Sharing
You can use Yealink WPP20 wireless presentation pod for wireless content sharing. WPP20 needs to
be purchased separately.
Make sure the MShare is connected to the mini-PC.
WPP20
(for wireless sharing)
Procedure
1. Connect the WPP20 to the USB port of the MShare.
2. Wait for about 3 seconds, the WPP20 LED indicator glows
solid green.
The WPP20 is paired with the MShare successfully.
3. Connect the WPP20 to the PC.
The Side of MShare
HDMI HDMI
Mini-PC
WPP20
PC
Wireless Presentation Pod
1
MShare Installation
1. Stick the velcros on the back of MShare.
3. Attach the cable tie mounting base onto a surface.
Fix the cables with the cable tie.
2. Put the MShare on the surface such as
table, wall and so on.
cable tie
LED Indicator Instructions
LED Indicator of
LED Status
Solid yellow
Solid green
Solid red MShare is in sleep mode.
Fast-flashing yellow MShare is upgrading firmware.
Slow-flashing red
Wi-Fi AP LED Indicator
LED Status
Solid green
Solid yellow The WPP20 is not connected to the MShare.
Solid red
Working Status
Description
MShare is not connected to a PC or you do not use WPP20
for content sharing.
MShare is connected to a PC for content sharing via
HDMI/Mini-DP or you use WPP20 for content sharing.
Failed to upgrade firmware.
Description
The WPP20 has been paired with the MShare and is
connected to a PC for content sharing
MShare is in sleep mode.
.
cable
cable tie mounting base
2
包装清单
MShare
×4
3M背胶固定座×2
我们推荐使用由Yealink提供或经Yealink认可的配件和线缆，使用未经认可的第三方配件和线缆
可能会导致性能的下降。
7米USB线
扎带×2
1.2米 HDMI线
(用于分享辅流)
魔术贴×2
MShare 快速入门指南
连接MShare
MShare正面
MINI DP HDMI
(分享有线辅流)
PC
WPP20
(分享无线辅流)
无线辅流分享内容
你可以使用WPP20无线传屏助手进行无线辅流分享内容。WPP20需要单独购买。
分享内容前，确保MShare已正确连接在mini-PC上。
过程
1. 将WPP20 连接到MShare的USB口.
2. 约3秒后，WPP20指示灯显示绿色常亮。
WPP20与MShare配对成功。
3. 将WPP20连接到电脑上。
HDMI HDMI
Mini-PC
PC
1.2米 Mini-DP线
(用于分享辅流)
MShare侧面
WPP20
无线传屏助手
3
安装MShare
1. 将魔术贴贴在MShare背面。
2. 将MShare放置在平面上。
3. 将背胶固定座固定在平面上，并用扎带扎紧线材。
MShare指示灯
工作状态指示灯
指示灯状态
黄色常亮
绿色常亮
红色常亮
黄色快闪
红色慢闪
Wi-Fi AP 指示灯
指示灯状态 说明
绿色常亮
黄色常亮
红色常亮 MShare进入休眠模式。
MShare未通过HDMI线/Mini-DP线连接电脑或没有使用
WPP20进行无线辅流分享内容。
MShare通过HDMI线/Mini-DP线连接电脑进行有线辅流
分享内容或使用WPP20进行无线辅流分享内容。
MShare进入休眠模式。
正在升级固件。
固件升级失败。
WPP20与MShare已配对并连接在电脑上可进行辅流分享。
WPP20未连接到MShare。
扎带
线材
背胶固定底座
说明
4
Regulatory Notices
Operating Ambient Temperatures
Operating temperature: +32 to 104°F (0 to 40°C)
Relative humidity: 5% to 90%, noncondensing
Storage temperature: -22 to +160°F (-30 to +70°C)
Warranty
Our product warranty is limited only to the unit itself, when used normally
in accordance with the operating instructions and the system environment.
We are not liable for damage or loss resulting from the use of this product,
or for any claim from a third party. We are not liable for problems with
Yealink device arising from the use of this product; we are not liable for
financial damages, lost profits, claims from third parties, etc., arising from
the use of this product.
Explanation of the symbols
DC symbol
is the DC voltage symbol.
WEEE Warning symbol
To avoid the potential effects on the environment and human health
as a result of the presence of hazardous substances in electrical and
electronic equipment, end users of electrical and electronic
equipment should understand the meaning of the crossed-out wheeled bin
symbol. Do not dispose of WEEE as unsorted municipal waste and have to
collect such WEEE separately.
Restriction of Hazardous Substances Directive (RoHS)
All adapter devices comply with the requirements of the EU RoHS Directive.
Statements of compliance can be obtained by contacting support@yealink.com.
Safety Instructions
Save these instructions. Read these safety instructions before use!
General Requirements
Before you install and use the device, read the safety instructions
carefully and observe the situation during operation.
During the process of storage, transportation, and operation, please
always keep the device dry and clean, avoid collision and crash.
Please attempt not to dismantle the device by yourself. In case of any
discrepancy, please contact the appointed maintenance center for repair.
Please refer to the relevant laws and statutes while using the device.
Legal rights of others should be respected as well.
Environmental Requirements
Place the device at a well-ventilated place. Do not expose the device
under direct sunlight.
Keep the device dry and free of dusts.
Do not place the device on or near any inflammable or fire-vulnerable
object, such as rubber-made materials.
Keep the device away from any heat source or bare fire, such as a candle
or an electric heater.
Operating Requirements
Do not let a child operate the device without guidance.
Do not let a child play with the device or any accessory in case of
accidental swallowing.
Please use the accessories provided or authorized by the manufacturer
only.
The power supply of the device shall meet the requirements of the input
voltage of the device. Please use the provided surge protection power
socket only.
Before plugging or unplugging any cable, make sure that your hands are
completely dry.
Do not spill liquid of any kind on the product or use the equipment near
water, for example, near a bathtub, washbowl, kitchen sink, wet
basement or near a swimming pool.
During a thunderstorm, stop using the device and disconnect it from the
power supply. Unplug the power plug and the Asymmetric Digital
Subscriber Line (ADSL) twisted pair (the radio frequency cable) to avoid
lightning strike.
If the device is left unused for a rather long time, disconnect it from the
power supply and unplug the power plug.
When there is smoke emitted from the device, or some abnormal noise
or smell, disconnect the device from the power supply, and unplug the
power plug immediately.
Contact the specified maintenance center for repair.
Do not insert any object into equipment slots that is not part of the
product or auxiliary product.
Before connecting a cable, connect the grounding cable of the device
first. Do not disconnect the grounding cable until you disconnect all other
cables.
Cleaning Requirements
Before cleaning the device, disconnect it from the power supply.
Use a piece of soft, dry and anti-static cloth to clean the device.
Keep the power plug clean and dry.
Troubleshooting
The unit cannot supply power to device other than Yealink device.
There is a bad connection with the plug.
1. Clean the plug with a dry cloth.
2. Connect it to another wall outlet.
The usage environment is out of operating temperature range.
1. Use in the operating temperature range.
The cable between the unit and the Yealink device is connected incorrectly.
1. Connect the cable correctly.
You cannot connect the cable properly.
1. You may have connected a wrong Yealink device.
2. Use the correct power supply.
Some dust, etc., may be in the port.
1. Clean the port.
Contact your dealer or authorized service facility for any further questions.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the
following
two conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may
cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
IC Statement
This device complies with Industry Canada’s licence-exempt RSSs. Operation is
subject to the following two conditions:
(1) this device may not cause interference; and
(2) this device must accept any interference, including interference that may
cause undesired operation of the device. CAN ICES-3(B)
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux
appareils radio exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes :
(1) l’appareil ne doit pas produire de brouillage;
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en compromettre le
fonctionnement.NMB-3(B)
Contact Information
YEALINK NETWORK TECHNOLOGY CO.,LTD.
309, 3rd Floor, No.16, Yun Ding North Road, Huli District, Xiamen City, Fujian, P.R. China
YEALINK (EUROPE) NETWORK TECHNOLOGY B.V.
Strawinskylaan 3127, Atrium Building, 8th floor, 1077ZX Amsterdam, The Netherlands
YEALINK (USA) NETWORK TECHNOLOGY CO., LTD.
999 Peachtree Street Suite 2300, Fulton, Atlanta, GA, 30309, USA
Made in China
About Yealink
Yealink is a global leading provider of enterprise communication and collaboration solutions, offering video
conferencing service to worldwide enterprises. Focusing on research and development, Yealink also insists on
innovation and creation. With the outstanding technical patents of cloud computing , audio, video and image
processing technology, Yealink has built up a panoramic collaboration solution of audio and video conferencing by
merging its cloud services with a series of endpoints products. As one of the best providers in more than 140
countries and regions including the US, the UK and Australia, Yealink ranks No.1 in the global market share of SIP
phones shipments.
Technical Support
Visit Yealink WIKI (http://support.yealink.com/) for the latest firmware, guides, FAQ, Product documents, and more.
For better service, we sincerely recommend you to use Yealink Ticketing system (https://ticket.yealink.com) to submit
all your technical issues.
Web: www.yealink.com
©2019
MSha r e- E N+CN
Copyright
TECHNOLOGY CO.,LTD
YEALINK(XIAMEN) NETWORK
.All rights reserved.
Loading...