Yamaha YZF-R6 Service Manual 3
Specifications and Main Features
- Engine Type: Four-stroke, with liquid cooling feature.
- Engine Capacity: 600 cc
- Engine Dimensions: Bore x Stroke: 67 x 68.0 in millimeter.
- Compression Ratio: Its ratio is 10.5 to 1.
- Maximum Engine Power: It can produce a maximum engine power of 80 horse power at a rotational speed of 10,500.
- Maximum Torque: This engine generates a maximum torque of 60 Nm at 8,500 rpm.
- Fuel System: It is equipped with an EFI system which stands for electronic fuel injection.
- Ignition System: It caters a digital and electronic ignition system.
- Transmission: A six speed fabric pattern of car transmission.
- Final Drive: It for its final drive relies on a chain.
- Dimensions: When considering overall length as 2,115 mm the overall width and height is 750 mm it is 1,165 m tall respectively. The wheel base formula is calculated by 1,440 mm, chair height is of around 800 m.
Frequently Asked Questions
- Tire: It has a dual disc menu in the front, a single disc in the rear and mounted with tires on the front of 120 and 70 ZR17 while the rear of 180 55 ZR17.
- Suspension and Electrical system: It has an inverted telescopic for the front, and a mono shock for the rear vents, and the electric system is a 12 V and a 10A battery.
- Light: The device has a bad halogen bolt light and a specific query.
2) Frequent questions
Q: What is the recommended oil type for this motorcycle?
A: If one wishes to use magic or yama oil then stick to 4 of 10 30 or sa 10 w 30 of grade SE engine oil.
FOR QUERIES: INTERVAL FOR ENGINE OIL REPLACEMENT?
The optimum range to replace the oil of the engine is 8000 miles or 13000 kilometers or simply after a duration of 12 months has passed.
FOR QUERIES: IDEAL TIRE PRESSURE?
The maximum limit for tire air pressure in a car is set to a recommended 36 for the front and a higher 42 for rear tires.
FOR QUERIES: MONITORING BRAKE FLUID LEVEL?
Start the inspection by leveling the motorcycle horizontally, then count the dots on the brake fluid reservoir and maintain the level alongside the lowest and the highest marker levels.
FOR QUERIES: WEIGHT LIMIT ON ENTERING A BIKE?
It is safe to say that the combined payload which incorporates the bike, rider and a separate passenger will amount to around 190 kilograms, this ensures a valid level of comfort and protection.
FOR QUERIES: MAKING VALVE REPLACEMENTS?
Make sure to always crank the engine first to thoroughly measure both the valve clearance and how far the shaft can be adjusted, follow this through by relying on the manual for further step wise guides.
FOR QUERIES: ANY LIMITATIONS ON THE VELOCITY OVERALLOADING?
Although motorcycles are equipped for a myriad of weather conditions, it is still advised that safety be kept at optimum levels especially when driving in wet weather as the factors are liable to affect traction.
Q: How do I synchronize the carburetors?
A: First adjust the valve clearance and idling speed of the engine accordingly, then lock the vacuum gauge to the manifold and do the synchronization as per the instructions in the workshop manual.
User Manual
Loading...