PRODUCT SAFETY MARKINGS: Yamaha electronic
products may have either labels similar to the graphics
shown below or molded/stamped facsimiles of these graphics on the enclosure. The explanation of these graphics
appears on this page. Please observe all cautions indicated
on this page and those indicated in the safety instruction section.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
See bottom of Keyboard enclosure for graphic symbol markings.
The exclamation point within the equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the
product.
ENVIRONMENTAL ISSUES: Yamaha strives to produce
products that are both user safe and environmentally
friendly. We sincerely believe that our products and the production methods used to produce them, meet these goals. In
keeping with both the letter and the spirit of the law, we
want you to be aware of the following:
Battery Notice: This product MAY contain a small nonrechargeable battery which (if applicable) is soldered in
place. The average life span of this type of battery is approximately five years. When replacement becomes necessary,
contact a qualified service representative to perform the
replacement.
Warning: Do not attempt to recharge, disassemble, or incinerate this type of battery. Keep all batteries away from children. Dispose of used batteries promptly and as regulated by
applicable laws. Note: In some areas, the servicer is required
by law to return the defective parts. However, you do have
the option of having the servicer dispose of these parts for
you.
Disposal Notice: Should this product become damaged
beyond repair, or for some reason its useful life is considered to be at an end, please observe all local, state, and federal regulations that relate to the disposal of products that
contain lead, batteries, plastics, etc.
The lightning flash with arrowhead symbol, within the equilateral triangle, is
intended to alert the user to the presence
of uninsulated “dangerous voltage”
within the product’s enclosure that may
be of sufficient magnitude to constitute a
risk of electrical shock.
IMPORTANT NOTICE: All Yamaha electronic products
are tested and approved by an independent safety testing
laboratory in order that you may be sure that when it is properly installed and used in its normal and customary manner,
all foreseeable risks have been eliminated. DO NOT modify
this unit or commission others to do so unless specifically
authorized by Yamaha. Product performance and/or safety
standards may be diminished. Claims filed under the
expressed warranty may be denied if the unit is/has been
modified. Implied warranties may also be affected.
SPECIFICATIONS SUBJECT TO CHANGE: The
information contained in this manual is believed to be correct at the time of printing. However, Yamaha reserves the
right to change or modify any of the specifications without
notice or obligation to update existing units.
NOTICE: Service charges incurred due to lack of knowledge relating to how a function or effect works (when the
unit is operating as designed) are not covered by the manufacturer’s warranty, and are therefore the owners responsibility. Please study this manual carefully and consult your
dealer before requesting service.
NAME PLATE LOCATION: The graphic below indicates
the location of the name plate. The model number, serial
number, power requirements, etc., are located on this plate.
You should record the model number, serial number, and the
date of purchase in the spaces provided below and retain this
manual as a permanent record of your purchase.
Model
Serial No.
92-469- ➀(bottom)
2 R01 Owner’s Manual
Purchase Date
Page 3
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The above warning is located on the bottom of the unit.
IMPORTANT SAFETY INSTRUCTIONS
Explanation of Graphical Symbols
The lightning flash with arrowhead symbol
within an equilateral triangle is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the product.
1Read these instructions.
2Keep these instructions.
3Heed all warnings.
4Follow all instructions.
5Do not use this apparatus near water.
6Clean only with dry cloth.
7Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has
two blades and a third grounding prong. The wide blade
or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10 Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR
MOISTURE.
11 Only use attachments/accessories specified by the
manufacturer.
12 Use only with the cart, stand,
tripod, bracket, or table specified
by the manufacturer, or sold with
the apparatus. When a cart is
used, use caution when moving
the cart/apparatus combination to
avoid injury from tip-over.
13 Unplug this apparatus during
lightning storms or when unused for long periods of
time.
14 Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug
is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally,
or has been dropped.
(UL60065_03)
R01 Owner’s Manual 3
Page 4
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING
* Please keep this manual in a safe place for future reference.
WARNING
Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical
shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:
Power supply/Power cord
• Only use the voltage specified as correct for the instrument. The required voltage
is printed on the name plate of the instrument.
• Check the electric plug periodically and remove any dirt or dust which may have
accumulated on it.
• Use only the supplied power cord/plug.
• Do not place the power cord near heat sources such as heaters or radiators, and
do not excessively bend or otherwise damage the cord, place heavy objects on
it, or place it in a position where anyone could walk on, trip over, or roll anything
over it.
Water warning
• Do not expose the instrument to rain, use it near water or in damp or wet
conditions, or place containers on it containing liquids which might spill into
any openings. If any liquid such as water seeps into the instrument, turn off the
power immediately and unplug the power cord from the AC outlet. Then have the
instrument inspected by qualified Yamaha service personnel.
• Never insert or remove an electric plug with wet hands.
Fire warning
• Do not put burning items, such as candles, on the unit.
A burning item may fall over and cause a fire.
Do not open
• Do not open the instrument or attempt to disassemble the internal parts or
modify them in any way. The instrument contains no user-serviceable parts. If it
should appear to be malfunctioning, discontinue use immediately and have it
inspected by qualified Yamaha service personnel.
If you notice any abnormality
• If the power cord or plug becomes frayed or damaged, or if there is a sudden
loss of sound during use of the instrument, or if any unusual smells or smoke
should appear to be caused by it, immediately turn off the power switch,
disconnect the electric plug from the outlet, and have the instrument inspected
by qualified Yamaha service personnel.
CAUTION
Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage
to the instrument or other property. These precautions include, but are not limited to, the following:
Power supply/Power cordLocation
• When removing the electric plug from the instrument or an outlet, always hold
the plug itself and not the cord. Pulling by the cord can damage it.
• Remove the electric plug from the outlet when the instrument is not to be used
for extended periods of time, or during electrical storms.
• Do not connect the instrument to an electrical outlet using a multiple-connector.
Doing so can result in lower sound quality, or possibly cause overheating in the
outlet.
(1)B-13 1/2
4 R01 Owner’s Manual
• Do not expose the instrument to excessive dust or vibrations, or extreme cold or
heat (such as in direct sunlight, near a heater, or in a car during the day) to
prevent the possibility of panel disfiguration or damage to the internal
components.
• Do not use the instrument in the vicinity of a TV, radio, stereo equipment, mobile
phone, or other electric devices. Otherwise, the instrument, TV, or radio may
generate noise.
• Do not place the instrument in an unstable position where it might accidentally
fall over.
• Before moving the instrument, remove all connected cables.
• When setting up the product, make sure that the AC outlet you are using is easily
accessible. If some trouble or malfunction occurs, immediately turn off the
power switch and disconnect the plug from the outlet. Even when the power
switch is turned off, electricity is still flowing to the product at the minimum
level. When you are not using the product for a long time, make sure to unplug
the power cord from the wall AC outlet.
Page 5
Maintenance
• In the case of a model with a polished finish, gently remove dust and dirt with a
soft cloth. Do not wipe too hard since small particles of dirt can scratch the
instrument's finish.
• When cleaning the instrument, use a soft, dry or slightly damp cloth. Do not use
paint thinners, solvents, cleaning fluids, or chemical-impregnated wiping
cloths.
• During extreme changes in temperature or humidity, condensation may occur
and water may collect on the surface of the instrument. If water is left, the
wooden parts may absorb the water and be damaged. Make sure to wipe any
water off immediately with a soft cloth.
Handling caution
•Take care that the key cover does not pinch your fingers, and do not insert a
finger or hand in any gaps on the key cover or instrument.
• Never insert or drop paper, metallic, or other objects into the gaps on the key
cover, panel or keyboard. If this happens, turn off the power immediately and
unplug the power cord from the AC outlet. Then have the instrument inspected
by qualified Yamaha service personnel.
• Do not place vinyl, plastic or rubber objects on the instrument, since this might
discolor the panel or keyboard.
• In the case of a model with a polished finish, bumping the surface of the
instrument with metal, porcelain, or other hard objects can cause the finish to
crack or peel. Use caution.
• Do not rest your weight on, or place heavy objects on the instrument, and do not
use excessive force on the switches or connectors.
• Do not use the instrument/device or headphones for a long period of time at a
high or uncomfortable volume level, since this can cause permanent hearing
loss. If you experience any hearing loss or ringing in the ears, consult a
physician.
Using the bench
• Do not place the bench in an unstable position where it might accidentally fall
over.
• Do not play carelessly with or stand on the bench. Using it as a tool or stepladder or for any other purpose might result in accident or injury.
• Only one person should sit on the bench at a time, in order to prevent the
possibility of accident or injury.
• If the bench screws become loose due to extensive long-term use, tighten them
periodically using the included tool.
ENGLISH
Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed.
Always turn the power off when the instrument is not in use.
• The illustrations as shown in this manual are for instructional purposes only, and may appear somewhat different from those on your instrument.
This product incorporates and bundles computer programs and contents in which Yamaha owns copyrights or with respect to which it has license to use
others' copyrights. Such copyrighted materials include, without limitation, all computer software, MIDI files and WAVE data. Any unauthorized use of such
programs and contents outside of personal use is not permitted under relevant laws. Any violation of copyright has legal consequences. DON’T MAKE,
DISTRIBUTE OR USE ILLEGAL COPIES.
Copying of the commercially available musical data including but not limited to MIDI data and/or audio data is strictly prohibited except for your personal use.
Tuning
Unlike an acoustic piano, the instrument does not need to be tuned. It always stays
perfectly in tune.
Transporting
If you move to another location, you can transport the instrument along with your other
belongings. Transport the keyboard horizontally. Do not lean it up against a wall or
stand it up on its side. Do not subject the instrument to excessive vibration or shock.
CAUTION
When moving the instrument, always hold the bottom of the main unit. Do not hold
the key cover or top portion. Improper handling can result in damage to the
instrument or personal injury.
Do not hold here.
Hold here.
(1)B-13 2/2
R01 Owner’s Manual 5
Page 6
Before Using
Thank you for purchasing the Yamaha
MODUS R01!
We recommend that you read this manual
carefully and fully enjoy performing with
the R01. We also recommend that you
Main Features
NW (Natural Wood) with synthetic ivory
keytops
This type of keyboard features the feel of real ivory. The
special Natural Wood keyboard also uses real-wood
white keys. The key surface is soft and slightly porous,
giving the keys added grip and a natural friction that
lets you play easily. The authentic touch and feel of the
keys goes far beyond existing electronic keyboards, it
makes you feel as if you’re playing a real grand piano.
This specially crafted keyboard lets you use techniques
only possible on grand pianos, such as playing the same
note successively and having the sounds blend
smoothly even without use of the damper pedal, or
playing the same key quickly and having perfect
articulation without the sound cutting off unnaturally.
keep this manual in a safe and handy
place for future reference.
AWM Dynamic Stereo Sampling
AWM (Advanced Wave Memory) is an original
sampling system by Yamaha which creates authentic
acoustic instrument sounds by using digital technology
to record the actual instrument sound and applying
high-quality digital filter technology to the recorded
audio samples. The R01’s “Pure CF Voice” is
completely constructed from samples painstakingly
recorded from a Yamaha full-size concert grand piano.
Each sampled note has been adjusted and processed
meticulously to ensure the very best sound—with
instantaneous attack and expressive response. This
special Voice features four velocity-switched samples
(Dynamic Sampling), “Sustain Sampling” that samples
the unique resonance of an acoustic grand piano’s
soundboard and strings when the damper pedal is
pressed, and “Key-off Samples” that add the subtle
sound produced when the keys are released. These
sophisticated features and advanced technologies
ensure that the instrument sounds and plays virtually
the same as an actual acoustic piano.
6 R01 Owner’s Manual
Accessories
• Owner’s Manual (this book)
•My Yamaha Product User Registration
The PRODUCT ID on the sheet will be needed when you
fill out the User Registration form.
• AC Power Cord
• Cord Holders (4 pcs.)
•Music Rest
• Bench
Page 7
■ Connecting the Power Cord
WARNING
WARNING
CAUTION
CAUTION
First insert the plug of the power cord into the [AC IN] connector on
the instrument’s bottom panel, then plug the other end of the cord
into the proper AC outlet on the wall.
In some areas, a plug adaptor may be provided to match the pin
configuration of the AC wall outlets in your area.
Make sure your R01 is rated for the AC voltage supplied in the area in which it is to
be used (as listed on the bottom panel). Connecting the unit to the wrong AC supply
can cause serious damage to the internal circuitry and may even pose a shock
hazard!
Use only the AC power cord supplied with the R01. If the supplied cord is lost or
damaged and needs to be replaced, contact your Yamaha dealer. The use of an
inappropriate replacement can pose a fire and shock hazard!
Unplug the AC power cord when not using the instrument, or during electrical storms.
Attach the cord holder on the right or left end (whichever is closer to
an AC outlet) of the rear panel, then clip the power cord into the holder.
■ Setting the Pedal Adjusters
Rotate the pedal adjusters until they come in firm contact with the
floor surface.
(The shape of
plug differs
depending on
locale.)
ENGLISH
■ Opening the Key Cover
Insert your fingers in the indentation on the front of the
instrument, then lift the cover with both hands and fold it back
gently.
■ Closing the Key Cover
Remove the music rest
from the key cover.
CAUTION
Be careful to avoid
catching your fingers
when opening or closing
the cover.
Put the music rest on top of the key cover.
Due to the structure, the clear panel of the music
rest may move back and forth slightly. However,
this is not a safety issue.
Hold the key cover top with both
hands and close it gently.
CAUTION
Be careful to avoid catching
your fingers when opening
or closing the cover.
Hold the key cover with both hands when opening or closing it, and do not release it until it is fully opened or closed.
Be careful to avoid catching fingers (yours or others, and especially those of children) between the cover and main unit.
R01 Owner’s Manual 7
Page 8
Playing the
Instrument
Let’s start playing the instrument.
■ Turning the Power On
Press the [POWER] switch to turn on the power to
the unit.
The power indicator located on the [MASTER
VOLUME] control lights up.
Press the [POWER] switch again to turn off the
power to the unit.
CAUTION
A small amount of electrical current remains even after the
power switch is turned off. If you plan not to use the instrument
for a long period of time, be sure to unplug the instrument from
the AC outlet.
■ Setting the Volume
To adjust the volume, use the [MASTER VOLUME]
control. Play the keyboard to actually produce sound
while you adjust the volume.
CAUTION
Do not use the instrument at a high volume level for a long
period of time, or your hearing may be damaged.
The level decreases.The level increases.
Power indicator
■ Fine-tuning the Pitch
You can fine-tune the pitch of the entire
instrument. This function is useful when you play
the R01 along with other instruments or CD music.
Setting range: 427.0–453.0 Hz (=A3)
Standard pitch: 440.0 Hz
To tune up (in about 0.2Hz steps)
Press and hold down the A-1, B-1 and C0 keys simultaneously,
and press any key between C3 and B3.
B-1
To tune down (in about 0.2Hz steps)
Press and hold down the A-1, B-1 and C#0 keys simultaneously,
and press any key between C3 and B3.
C#0
C1C2C3B3C0A-1
8 R01 Owner’s Manual
B-1
C1C2C3B3A-1
Page 9
ENGLISH
■ Using Headphones
Connect a set of headphones to the
[PHONES] jack.
The speakers are automatically shut off
when a plug is inserted into this jack.
CAUTION
Do not use headphones at a high volume for an
extended period of time. Doing so may cause hearing
loss.
To restore standard pitch
Press and hold down the A-1, B-1, C0 and C#0
keys simultaneously, and press any key
between C3 and B3.
C#0
B-1
Hz (Hertz):
This unit of measurement refers to the frequency of a
sound and represents the number of times a sound
wave vibrates in a second.)
C1C2C3B3C0A-1
■ Using the Pedals
The instrument has three foot pedals that produce a range of
expressive effects similar to those produced by the pedals on an
acoustic piano.
Damper (Right) Pedal
The damper pedal functions in the same
way as a damper pedal on an acoustic
piano. When the damper pedal is pressed,
notes sustain longer. Releasing the pedal
immediately stops (damps) any sustained
notes.
The damper pedal features a half-pedal
function.
Half-pedal function:
While playing the piano with Sustain and you
want to slightly mute the sustained sound,
release the damper pedal from maximum
position to half position.
Sostenuto (Center) Pedal
If you play a note or chord on the keyboard
and press the sostenuto pedal while the
note(s) are held, those notes will sustain as
long as you hold the pedal (as if the damper
pedal had been pressed) but all subsequently
played notes will not be sustained. This
makes it possible to sustain a chord, for
example, while other notes are played
“staccato.”
Soft (Left) Pedal
The soft pedal reduces the volume and slightly changes the timbre of
notes played while the pedal is pressed. The soft pedal will not affect
notes that are already playing when it is pressed.
When you press the damper
pedal here, the notes you play
before you release the pedal
sustain longer.
When you press the sostenuto
pedal here while holding the
note, the note will sustain as
long as you hold the pedal.
R01 Owner’s Manual 9
Page 10
Tr oubleshooting
ProblemPossible Cause and Solution
The instrument does not turn on.
A click or pop is heard when the power is
turned on or off.
Noise is heard from the speakers or
headphones.
The overall volume is low, or no sound is
heard.
The pitch and/or tone of the Piano Voice
in certain ranges do not sound right.
Mechanical noise is heard when the keys
move.
The damper pedal has little effect.
The instrument has not been plugged in properly. Securely insert the female plug into the
socket on the instrument, and the male plug into a proper AC outlet (page 7).
This is normal when electrical current is being applied to the instrument.
The noise may be due to interference caused by the use of a mobile phone in close proximity to the instrument. Turn off the mobile phone, or use it further away from the instrument.
• The Volume is set too low: set it to an appropriate level using the [MASTER VOLUME]
control (page 8).
• Make sure a pair of headphones is not connected to the headphones jack.
The Piano Voice attempts to precisely simulate actual piano sounds. However, as a result
of sampling algorithms, overtones in some ranges may sound exaggerated, producing a
somewhat different pitch or tone. This is normal, and no cause for concern.
The keyboard mechanism of this instrument simulates the keyboard mechanism of an
actual piano. Mechanical noise is also heard on a piano. This is normal, and is no cause
for concern.
The damper pedal was pressed when the power was turned on. This is not a malfunction;
release the pedal and press it again to reset the function.
Tone Generation TechnologyAWM Dynamic Stereo Sampling
Number of Dynamic Levels4
Stereo Sustain SamplesYes
Key-off SamplesYes
Reverb (Fixed)Yes
Damper Resonance (Fixed)Yes
763mm (30-1/16")
Cover open with music rest: 965mm (38")
NW (Natural Wood) with synthetic ivory keytops
(with real-wood white keys)
Owner’s Manual, AC Power Cord, Cord Holders
(4 pcs.), Bench, Music Rest, My Yamaha Product
User Registration
* Specifications and descriptions in this owner’s manual are for information purposes only. Yamaha Corp. reserves the right to change or modify products or
specifications at any time without prior notice. Since specifications, equipment or options may not be the same in every locale, please check with your
Yamaha dealer.
10 R01 Owner’s Manual
Page 11
Information for Users on Collection and Disposal of Old Equipment
This symbol on the products, packaging, and/or accompanying documents means that used electrical and electronic
products should not be mixed with general household waste.
For proper treatment, recovery and recycling of old products, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC.
By disposing of these products correctly, you will help to save valuable resources and prevent any potential negative
effects on human health and the environment which could otherwise arise from inappropriate waste handling.
For more information about collection and recycling of old products, please contact your local municipality, your waste
disposal service or the point of sale where you purchased the items.
[For business users in the European Union]
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.
[Information on Disposal in other Countries outside the European Union]
This symbol is only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal.
ENGLISH
R01 Owner’s Manual 11
Page 12
MEMO
12 R01 Owner’s Manual
Page 13
MEMO
R01 Owner’s Manual 13
Page 14
FCC INFORMATION (U.S.A.)
1. IMPORTANT NOTICE: DO NOT MODIFY THIS
UNIT!
This product, when installed as indicated in the instructions
contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your
authority, granted by the FCC, to use the product.
2. IMPORTANT: When connecting this product to accesso-
ries and/or another product use only high quality shielded
cables. Cable/s supplied with this product MUST be used.
Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this product
in the USA.
3. NOTE: This product has been tested and found to comply
with the requirements listed in FCC Regulations, Part 15 for
Class “B” digital devices. Compliance with these requirements provides a reasonable level of assurance that your
use of this product in a residential environment will not result
in harmful interference with other electronic devices. This
equipment generates/uses radio frequencies and, if not
installed and used according to the instructions found in the
users manual, may cause interference harmful to the opera-
* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA.(class B)
tion of other electronic devices. Compliance with FCC regulations does not guarantee that interference will not occur in
all installations. If this product is found to be the source of
interference, which can be determined by turning the unit
“OFF” and “ON”, please try to eliminate the problem by
using one of the following measures:
Relocate either this product or the device that is being
affected by the interference.
Utilize power outlets that are on different branch (circuit
breaker or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient the
antenna. If the antenna lead-in is 300 ohm ribbon lead,
change the lead-in to co-axial type cable.
If these corrective measures do not produce satisfactory
results, please contact the local retailer authorized to distribute this type of product. If you can not locate the appropriate
retailer, please contact Yamaha Corporation of America,
Electronic Service Division, 6600 Orangethorpe Ave, Buena
Park, CA90620
The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries.
IMPORTANT NOTICE FOR THE UNITED KINGDOM
Connecting the Plug and Cord
IMPORTANT. The wires in this mains lead are coloured in accordance
with the following code:
As the colours of the wires in the mains lead of this apparatus may not
correspond with the coloured makings identifying the terminals in your
plug proceed as follows:
The wire which is coloured BLUE must be connected to the terminal
which is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED.
Making sure that neither core is connected to the earth terminal of the
three pin plug.
• This applies only to products distributed by Yamaha Music U.K. Ltd.(2 wires)
BLUE : NEUTRAL
BROWN : LIVE
14 R01 Owner’s Manual
Page 15
For details of products, please contact your nearest Yamaha
representative or the authorized distributor listed below.
Pour plus de détails sur les produits, veuillez-vous adresser à Yamaha ou
au distributeur le plus proche de vous figurant dans la liste suivante.
Die Einzelheiten zu Produkten sind bei Ihrer unten aufgeführten
Niederlassung und bei Yamaha Vertragshändlern in den jeweiligen
Bestimmungsländern erhältlich.
Para detalles sobre productos, contacte su tienda Yamaha más cercana
o el distribuidor autorizado que se lista debajo.