Yamaha MY16AEATTD User Manual
DIGITAL I/O CARD
MY16-AE/MY16-AT/MY16-TD
Owner’s Manual
Bedienungsanleitung
Mode d’emploi
Manual de instrucciones
取扱説明書
Thank you for purchasing an I/O card for use with Yamaha digital audio equipment.
Refer to the respective owner’s manual for installation information.
As well as securing the card in place, the fixing screws act as an electrical ground, so be sure to screw them in
tightly.
* The company names and product names in this Owner's Manual are the trademarks or registered trademarks of their respective
companies.
* TDIF is a trademark of TEAC Corporation.
Vielen Dank, dass Sie sich für eine I/O- Platine für ein Digital-Gerät von Yamaha entschieden haben.
Hinweise für den Einbau entnehmen Sie bitte der Bedienungsanleitung dieses Gerätes.
Da die Befestigungsschrauben auch für die Erdung verwendet werden, müssen Sie sie vollständig festdrehen.
* Alle in dieser Bedienungsanleitung erwähnten Firmen- und Produktnamen sind Warenzeichen oder eingetragene Warenzeichen
der betreffenden Rechtspersonen.
* TDIF ist ein Warenzeichen der TEAC Corporation.
Nous vous remer cions d’avoir acquis une carte I/O (entrées/sorties) pour matériel audio numérique Yamaha.
Vo yez les divers manuels pour savoir comment installer la carte.
Comme les vis servent aussi à mettre la carte à la terre, vous devez bien les serrer.
* Les noms de produits et de sociétés figurant dans ce mode d’emploi sont de marques commerciales ou des marques déposées de
leurs détenteurs respectifs.
* TDIF est une marque commerciale de TEAC Corporation.
Muchas gracias por la adquisición de este equipo de audio digital Yamaha.
Con respecto a la instalación, consulte el Manual de instrucciones apropiado.
Los tornillos de sujeción, además de fijar la tarjeta en su lugar, sirven como puesta a tierra, motivo por el que tendrá
que atornillarlos firmemente.
* Los nombres de empresas y de productos en este Manual del Usuario son marcas comerciales o marcas comerciales registradas de
sus respectivas empresas.
* TDIF es una marca comercial de TEAC Corporation.
このたびは、ヤマハデジタルオーディオ機器用 I/O カードをお買い上げいただきまして、まことにありがとうございます。
取付けは、装着する機器の取扱説明書を参照してください。
接続ネジはアース兼用ですのでしっかり締めてください。
* この取扱説明書に掲載されている会社名および製品名は、それぞれ各社の商標または登録商標です。
*TDIF は、ティアック株式会社の商標です。
– 1 –
FCC INFORMATION (U.S.A.)
1. IMPORTANT NOTICE: DO NOT MODIFY THIS
UNIT!
This product, when installed as indicated in the
instructions contained in this manual, meets FCC
requirements. Modifications not expressly
approved by Yamaha may void your authority,
granted by the FCC, to use the product.
2. IMPORTANT: When connecting this product to
accessories and/or another product use only high
quality shielded cables. Cable/s supplied with this
product MUST be used. Follow all installation
instructions. Failure to follow instructions could void
your FCC authorization to use this product in the
USA.
3. NOTE: This product has been tested and found to
comply with the requirements listed in FCC Regulations, Part 15 for Class “B” digital devices. Compliance with these requirements provides a
reasonable level of assurance that your use of this
product in a residential environment will not result
in harmful interference with other electronic
devices. This equipment generates/uses radio frequencies and, if not installed and used according
to the instructions found in the users manual, may
cause interference harmful to the operation of
The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its
subsidiaries.
* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. (class B)
other electronic devices. Compliance with FCC
regulations does not guarantee that interference
will not occur in all installations. If this product is
found to be the source of interference, which can
be determined by turning the unit “OFF” and “ON”,
please try to eliminate the problem by using one of
the following measures:
Relocate either this product or the device that is
being affected by the interference.
Utilize power outlets that are on different branch
(circuit breaker or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/
reorient the antenna. If the antenna lead-in is 300
ohm ribbon lead, change the lead-in to co-axial
type cable.
If these corrective measures do not produce satisfactory results, please contact the local retailer
authorized to distribute this type of product. If you
can not locate the appropriate retailer, please contact Yamaha Corporation of America, Electronic
Service Division, 6600 Orangethorpe Ave, Buena
Park, CA90620
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Loading...