How it Works
Yamaha
Loading...
HTR-3069
User Guide
87 pgs11.04 Mb0
Service manual
138 pgs28.04 Mb0
Table of contents
Loading...

Yamaha HTR-3069 User Guide

AV Receiver
Owner's Manual
Read the supplied booklet “Safety Brochure” before using the unit.
EN

CONTENTS

BEFORE USING THE UNIT 4
Accessories................................................................................................ 4
How to use this manual............................................................................ 4
Remote control.......................................................................................... 4
FEATURES 5
What you can do with the unit................................................................. 5
Part names and functions......................................................................... 7
PREPARATIONS 11
1 Placing speakers............................................................................... 12
2 Connecting speakers........................................................................ 16
3 Connecting a TV/playback devices.................................................. 18
4 Connecting the FM/AM antennas.................................................... 23
5 Connecting the power cable............................................................ 23
6 Selecting an on-screen menu language.......................................... 24
7 Optimizing the speaker settings automatically (YPAO)................ 25
PLAYBACK 29
Basic playback procedure...................................................................... 29
Enjoying playback................................................................................................................................................................. 29
Switching information on the front display................................................................................................................. 30
Selecting the input source and favorite settings with one touch
(SCENE).................................................................................................... 31
Selecting the sound mode..................................................................... 32
Playing back digitally compressed formats (such as MP3, etc.) with enriched sound (Compressed Music Enhancer)
Listening to FM/AM radio....................................................................... 37
Playing back music stored on a Bluetooth® device.............................. 42
Playing back music stored on a USB storage device (Except for USA,
..................................................................................................................................................................... 36
Canada, Australia models)..................................................................... 44
2
En
Configuring playback settings for different playback sources
(Option menu)......................................................................................... 47
CONFIGURATIONS 51
Configuring various functions (Setup Menu)....................................... 51
Setup menu items................................................................................................................................................................. 52
Speaker...................................................................................................................................................................................... 54
HDMI........................................................................................................................................................................................... 57
Sound......................................................................................................................................................................................... 59
ECO............................................................................................................................................................................................. 61
Function.................................................................................................................................................................................... 62
Language.................................................................................................................................................................................. 64
Configuring the system settings (ADVANCED SETUP menu).............. 65
APPENDIX 68
Glossary................................................................................................... 76
Supported devices and file formats...................................................... 78
Video signal flow.................................................................................... 78
Information on HDMI.............................................................................. 79
Trademarks............................................................................................. 82
Specifications.......................................................................................... 83
Frequently asked questions................................................................... 68
Troubleshooting..................................................................................... 69
First, check the following:................................................................................................................................................... 69
Power, system and remote control................................................................................................................................. 69
Audio.......................................................................................................................................................................................... 70
Video.......................................................................................................................................................................................... 72
FM/AM radio............................................................................................................................................................................ 73
USB (Except for USA, Canada, Australia models)........................................................................................................ 73
Bluetooth®................................................................................................................................................................................ 74
Error indications on the front display................................................... 75
3
En

BEFORE USING THE UNIT

Within 6 m (20 ft)
30° 30°

Accessories

Remote control

Check that the following accessories are supplied with the product.
£ AM antenna £ FM antenna
* One of the above is supplied depending on
the region of purchase.
£ YPAO microphone £ Remote control
£ Batteries (AAA, R03, UM-4) (x2)
£ CD-ROM (Owner's Manual
£ Easy Setup Guide
£ Safety Brochure

How to use this manual

• Some features are not available in certain regions.
• Due to product improvements, specifications and appearance are subject to change without notice.
• This manual explains operations using the supplied remote control.
Notice:
Indicates precautions for use to avoid the possibility of malfunction/damage to the unit.
Note:
Indicates instructions and supplementary explanations for optimum use.
The supplied remote control is used as follows.

Insert the batteries

Insert the batteries the right way round.
)

Operating range of the remote control

Point the remote control at the remote control sensor on the unit and remain within the operating range shown below.
4
En

FEATURES

What you can do with the unit

The unit is equipped with full of useful functions.

Supports 2- to 5.1-channel speaker system

You can enjoy your favorite acoustic spaces in various styles.
YPAO automatically optimizes the speaker settings to suit your room.
• “Optimizing the speaker settings automatically (YPAO)” (p.25)
CINEMA DSP allows you to create stereo or multichannel sounds with the sound fields like actual movie theaters and concert halls in your own room.
• “Enjoying sound field effects (CINEMA DSP)” (p.33)
You can enjoy compressed music with enhanced sound (Compressed Music Enhancer).
• “Playing back digitally compressed formats (such as MP3, etc.) with enriched sound (Compressed Music Enhancer)”

Change the input source and favorite settings with one touch (SCENE)

The SCENE function allows you to select the input source and settings registered to the corresponding scene, such as sound program and Compressed Music Enhancer on/off, with just one touch.
• “Selecting the input source and favorite settings with one touch (SCENE)” (p.31)

4K Ultra HD signal and HDCP 2.2 supported

You can enjoy the high definition video quality of 4K with HDCP 2.2 that complies with the latest copyright protection.
• “Selecting the HDMI 4K signal format (4K MODE)” (p.66)
(p.36)

The ECO mode (power saving function) allows you to create an eco-friendly home theater system

When the ECO mode is enabled, you can reduce the unit's power consumption.
• “ECO Mode” (p.61)

Sequential operation of a TV, AV receiver, and BD/DVD player (HDMI Control)

When the unit is connected to an HDMI Control-compatible TV and BD/DVD player with each HDMI cable, you can control the unit (such as power and volume) and BD/DVD player with TV remote control operations.
• “HDMI Control” (p.79)

Supports Bluetooth® devices

You can play back music stored on a Bluetooth device.
• “Playing back music stored on a Bluetooth® device” (p.42)

Supports USB storage devices

You can play back music stored on a USB storage device.
• “Playing back music stored on a USB storage device (Except for USA, Canada, Australia models)” (p.44)

Connecting various devices

A number of HDMI jacks and various input/output jacks on the unit allow you to connect video devices (such as BD/DVD players), audio devices (such as CD players), game consoles, portable audio player, and other devices.
• “Connecting a TV/playback devices” (p.18)
5
En

Playing back TV audio in surround sound with a single HDMI cable connection (Audio Return Channel: ARC)

When using an ARC -compatible TV, you only need one HDMI cable to enable video output to the TV, audio input from the TV, and the transmission of HDMI Control signals.
• “Connecting a TV” (p.19)

Surround playback with 5 speakers placed in front

You can enjoy the surround sound even when the surround speakers are placed in front.
• “Enjoying sound field effects without surround speakers (Virtual CINEMA DSP)” (p.34)

Enhanced bass reproduction

Extra Bass allows you to enjoy enhanced bass reproduction that does not depend on the speakers used.
• “Enhancing the bass (Extra Bass)” (p.36)

Listening to FM/AM radio

The unit is equipped with a built-in FM/AM tuner. You can register up to 40 favorite radio stations as presets.
• “Listening to FM/AM radio” (p.37)

Useful applications

The useful application for connections and operations of the unit is as follows.
Application for tablets “AV SETUP GUIDE”
n
AV SETUP GUIDE is an application that assists you with cable connections between AV Receiver app guides you through the various settings such as speaker connections, TV and source device connections.
Functions:
1) Connection support guide – Speaker connection – TV/source devices connection
2) Setup support guide – Various setup assistance with illustrations. – YPAO setting guidance
3) View Owner's Manual
* This application is for tablets only.
For details, search for “AV SETUP GUIDE” on the App Store or Google Play™.
and source devices as well as AV Receiver setup. This

Easy operation with a TV screen

You can operate the USB storage device, view information, or easily configure the settings using the on-screen menu.

Auto Rename function

The unit creates an input source name, displayed on the front display, automatically according to the connected HDMI-compatible device.
• “Input Rename” (p.62)
6
En

Part names and functions

YPAO MIC
INFO
MEMORY (PAIRING
)
PRESET
FM AM
TUNING
PHONES
SILENT
CINEMA
VOLUME
AUX
TONE
CONTROL
STRAIGHT
TV
BD DVD
CD
RADIO
INPUT
PROGRAM
SCENE
AUDIO
USB
3 94 521 6 7 8
0
B D E
HF GA C
The part names and functions of the unit and the supplied remote control are as follows.

Front panel

1
z (power) key
Turns on/off (standby) the unit.
2
YPAO MIC jack
For connecting the supplied YPAO microphone (p.25).
3
Remote control sensor
Receives remote control signals (p.4).
4
INFO key
Selects the information displayed on the front display (p.30).
5
MEMORY (PAIRING) key
Registers FM/AM radio stations as preset stations (p.38).
Starts pairing with a Bluetooth device by holding down for 3 seconds (p.42).
6
PRESET keys
Select a preset FM/AM radio station (p.40).
7
FM and AM keys
Switch between FM and AM (p.37).
8
TUNING keys
Select the radio frequency (p.37).
9
Front display
Displays information (p.8).
:
PHONES jack
For connecting headphones.
A
INPUT keys
Select an input source.
B
TONE CONTROL key
Adjusts the high-frequency range and low-frequency range of output sounds (p.
C
SCENE keys
48).
Select the registered input source and sound program with one touch. Also, turns on the unit when it is in standby mode (p.31).
D
PROGRAM keys
Select a sound program or a surround decoder (p.32).
7
En
E
STRAIGHT key
Enables/disables the straight decode mode (p.35).
F
AUX jack
For connecting devices, such as portable audio players (p.22).
G
USB jack
For connecting a USB storage device (p.44).
H
VOLUME knob
Adjusts the volume.

Front display (indicators)

L C R
SL SW SR
VOL.
MUTE
ENHANCER
TUNEDSTEREO
SLEEP
OUT
ADAPTIVE DRC
3
4
6 7 8
09
B0
A
C
1
2 5
1
HDMI
Lights up when HDMI signals are being input or output.
OUT
Lights up when HDMI signals are being output.
2
ENHANCER
Lights up when Compressed Music Enhancer (p.36) is working.
3
CINEMA DSP
Lights up when CINEMA DSP (p.33) is working.
4
STEREO
Lights up when the unit is receiving a stereo FM radio signal.
TUNED
Lights up when the unit is receiving an FM/AM radio station signal.
5
Bluetooth indicator
Light up while the unit is connecting to a Bluetooth device.
6
SLEEP
Lights up when the sleep timer is on.
7
MUTE
Blinks when audio is temporarily muted.
8
Volume indicator
Indicates the current volume.
9
ECO
Lights up when the eco mode (p.61) is enabled.
:
Cursor indicators
Indicate the remote control cursor keys currently operational.
A
Information display
Displays the current status (such as input name and sound mode name). You can switch the information by pressing
30).
INFO (p.
B
Speaker indicators
Indicate speaker terminals from which signals are output.
A Front speaker (L) S Front speaker (R) D Center speaker F Surround speaker (L) G Surround speaker (R) L Subwoofer
C
ADAPTIVE DRC
Lights up when Adaptive DRC (p.48) is working.
8
En

Rear panel

8 95 7
2
1
3
6
4
▪ The area around the video/audio output jacks is marked in white
on the actual product to prevent improper connections.
1
HDMI OUT jack
For connecting to an HDMI-compatible TV and outputting video/audio signals ( signal can also be input through the HDMI OUT jack.
2
HDMI 1–4 jacks
For connecting to HDMI-compatible playback devices and inputting video/audio signals (
3
ANTENNA jacks
For connecting to FM and AM antennas (p.23).
4
Power cable
For connecting to an AC wall outlet (p.23).
5
AV jacks AUDIO jacks
For connecting to video/audio playback devices and inputting video/audio signals (
6
MONITOR OUT jacks
For connecting to a TV and outputting video signals (p.18).
p.18). When using ARC, TV audio
p.19).
p.20).
7
SUBWOOFER PRE OUT jack
For connecting to a subwoofer (with built-in amplifier) (p.16).
8
SPEAKERS terminals
For connecting to speakers (p.16).
9
VOLTAGE SELECTOR
(Taiwan, Brazil and General models only) Selects the switch position according to your local voltage (p.23).
9
En

Remote control

TUNING
PRESET
MUTE
TUNING
MEMORY
TOP MENU
HOME
POP-UP/MENU
DISPLAYRETURN
SETUP
OPTION
ENTER
FM/AM
VOLUME
PROG RAM
USB
STRAIGHT
ENHANCER BASS
BLUETOOTH
INP UT
BD
DVD
TV
CD
SC ENE
RADIO
SLEEP
BLUE
YELLOW
GREEN
RED
1
2
5
3
4
6
B
C
8
9
0
A
7
1
Remote control signal transmitter
Transmits infrared signals.
2
SLEEP key
Pressing this key repeatedly will specify the time (120 min, 90 min, 60 min, 30 min, off), in which the unit switches to the standby mode.
3
SCENE keys
Select the registered input source and sound program with one touch. Also, turn on the unit when it is in standby mode (p.31).
4
Sound mode keys
Select a sound mode (p.32).
5
Input selection keys
Select an input source for playback.
6
SETUP key
Displays the setup menu (p.51).
7
Menu operation keys
Cursor keys
ENTER
RETURN
Select a menu or the parameter.
Confirms a selected item.
Returns to the previous screen.
789 External device operation keys
Let you perform playback operations when “USB” is selected as the input source, or control playback of the HDMI Control-compatible playback device.
Note
▪ The playback devices must support HDMI Control. Some
HDMI Control-compatible devices cannot be used.
▪ You can assign the unit's functions to the RED/GREEN/
YELLOW/BLUE keys (
9
Radio keys
p.64).
Operate the FM/AM radio when “TUNER” is selected as the input source (p.37).
MEMORY
Registers FM/AM radio stations as presets.
PRESET
TUNING
:
z (receiver power) key
Select a preset station.
Select the radio frequency.
Turns on/off (standby) the unit.
A
VOLUME keys
Adjust the volume.
B
MUTE key
Mutes the audio output.
C
OPTION key
Displays the option menu (p.47).
10
En

PREPARATIONS

General setup procedure
1 Placing speakers................................................................................................................................ (p.12)
2 Connecting speakers........................................................................................................................ (p.16)
3 Connecting a TV/playback devices.................................................................................................. (p.18)
4 Connecting the FM/AM antennas.................................................................................................... (p.23)
5 Connecting the power cable............................................................................................................ (p.23)
6 Selecting an on-screen menu language.......................................................................................... (p.24)
7 Optimizing the speaker settings automatically (YPAO)................................................................ (p.25)
This completes all the preparations. Enjoy playing movies, music, radio and other content with the unit!
11
En

1 Placing speakers

Select the speaker layout for the number of speakers that you are using and place the speakers and subwoofer in your room. This section describes the representative speaker layout examples.
Notice
▪ (U.S.A. and Canada models only)
Under its default settings, the unit is configured for 8-ohm speakers. When connecting 6-ohm speakers, set the unit’s speaker impedance to “6
▪ (Except for U.S.A. and Canada models)
Use speakers with an impedance of at least 6 W.
▪ Use a subwoofer with built-in amplifier.
▪ Be sure to connect the front left and right speakers.
Ω MIN”. For details, see “Setting the speaker impedance” (p.15).
12
En

Typical speaker layouts

4 5
1 2
39
10° to 30° 10° to 30°
1 2
39
4 5
5.1-channel system
n
We recommend this speaker layout which can maximize the performance of the unit.
Speaker type Abbr. Function
Front (L/R)
Center
Surround (L/R)
Subwoofer
Note
▪ You can enjoy surround sound even without the center speaker (front 4.1-channel system).
▪ You can place the subwoofer either in the left or right side.
1/2
3
4/5
9
Produce front left/right channel sounds (stereo sounds).
Produces center channel sounds (such as movie dialogue and vocals).
Produce surround left/right channel sounds.
Produces LFE (low-frequency effect) channel sounds and reinforces the bass parts of other channels.
This channel is counted as “0.1”.
5.1-channel system (Virtual CINEMA FRONT)
n
We recommend this speaker layout when the speakers can't be placed in back of the room.
Speaker type Abbr. Function
Front (L/R)
Center
Surround (L/R)
Subwoofer
Note
▪ To utilize this configuration, set “Virtual CINEMA FRONT” (p.55) in the “Setup” menu to “On”.
▪ You can enjoy surround sound even without the center speaker (front 4.1-channel system).
▪ You can place the subwoofer either in the left or right side.
1/2
3
4/5
9
Produce front left/right channel sounds (stereo sounds).
Produces center channel sounds (such as movie dialogue and vocals).
Produce surround left/right channel sounds. By this system, place the surround speakers in front.
Produces LFE (low-frequency effect) channel sounds and reinforces the bass parts of other channels.
This channel is counted as “0.1”.
13
En

Other speaker layouts

1 2
39
1 2
9
The following speaker layouts are also available.
3.1-channel system
n
2.1-channel system
n
14
En
(power)
z
STRAIGHT
1 2
PARTY
VIRTUAL
VOL.
MUTE
ENHANCER
STEREO
TUNED
SLEEP
OUT
ECO
CHARGE
ADAPTIVE DRC
ZONE 2 A
ZONE 3B
SP IMP.••8¬MIN

Setting the speaker impedance

(U.S.A. and Canada models only)
Under its default settings, the unit is configured for 8-ohm speakers. When connecting 6-ohm speakers, set the speaker impedance to “6 Ω MIN”.
Before connecting speakers, connect the power cable to an AC
1
wall outlet.
While holding down STRAIGHT on the front panel, press z
2
(power).
Check that “SP IMP.” is displayed on the front display.
3
Press STRAIGHT to select “6 Ω MIN”.
4
Press z (power) to set the unit to standby mode and remove the
5
power cable from the AC wall outlet.
You are now ready to connect the speakers.
15
En

2 Connecting speakers

–
+
–
+
9
5 4
3 2 1
12
1234
34
The unit (rear)
10 mm (3/8”)
Audio pin cable
Use a subwoofer with built-in amplifier.
Subwoofer Surround (L)Surround (R) Center Front (R) Front (L)
10 mm (3/8”)
Precaution for connecting of the speaker cables
Improper connecting of the speaker cables may cause short circuit and also damage the unit or the speakers.
▪ Twist the bare wires of the speaker cables
firmly together.
▪ Do not let the core wires of the speaker cable
touch one another.
▪ Do not let the core wires of the speaker cable
come into contact with the unit’s metal parts (rear panel and screws).
If “Check SP Wires” appear on the front display when the unit is turned on, turn off the unit, and then check the speaker cables short circuit.
Connect the speakers placed in your room to the unit. The following diagrams provide connections for a 5.1-channel system as an example. For other systems, connect speakers while referring to the connection diagram for the 5.1-channel system.
Notice
▪ Remove the unit’s power cable from an AC wall outlet and turn off the subwoofer before connecting the speakers.
▪ The speaker has the polarity (+/-). Connect the speaker cable correctly between the positive (+) terminal of the unit and the speaker, and also between the negative (-) terminal of them.
Cables required for connection (commercially available)
Speaker cables (x the number of speakers)
Audio pin cable (x1: for connecting a subwoofer)
16
En
FRONT
aa
b
d
c
+ (red)
- (black)
FRONT
a
b
Banana plug
SURROUND
CENTER
aa
b
c
d
+ (red)
- (black)
AV 2
AV 3
Audio pin cable

Connecting speaker cables

Connecting center/surround speakers
n
Speaker cables have two wires. One is for connecting the negative (-) terminal of the unit and the speaker, and the other is for the positive (+) terminal. If the wires are colored to prevent confusion, connect the black wire to the negative and the other wire to the positive terminal.
Connecting front speakers
n
Remove approximately 10 mm (3/8”) of insulation from the ends of
1
the speaker cable, and twist the bare wires of the cable firmly together.
Loosen the speaker terminal.
2
Insert the bare wires of the cable into the gap on the side (upper
3
right or bottom left) of the terminal.
Tighten the terminal.
4
Using a banana plug
(U.S.A., Canada, Australia, Taiwan, Brazil and General models only)
Remove approximately 10 mm (3/8”) of insulation from the ends of
1
the speaker cable, and twist the bare wires of the cable firmly together.
Press down the tab.
2
Insert the bare wires of the cable into the hole in the terminal.
3
Release the tab.
4

Connecting the subwoofer (with built-in amplifier)

Use an audio pin cable to connect the subwoofer.
Tighten the speaker terminal.
1
Insert a banana plug into the end of the terminal.
2
17
En

3 Connecting a TV/playback devices

HDMI cable
Video pin cable
OPTICAL
Digital optical cable
Digital coaxial cable
Stereo pin cable
Stereo mini-plug cable
The unit is equipped with a variety of input jacks including HDMI input jacks to allow you to connect different types of playback devices. For information on how to connect a Bluetooth device or a USB storage device, see the following pages.
• Connecting a Bluetooth device (p.42)
• Connecting a USB storage device (p.44)

Input/output jacks and cables

Video/audio jacks
n
HDMI jacks
Transmit digital video and digital sound through a single jack. Use an HDMI cable.
Note
▪ Use a 19-pin HDMI cable with the HDMI logo. We
recommend using a cable less than 5.0 m (16.4 ft) long to prevent signal quality degradation.
▪ The unit’s HDMI jacks support the HDMI Control, Audio
Return Channel (ARC), and 3D and 4K Ultra HD video transmission (through output) features.
▪ Use high speed HDMI cables to enjoy 3D or 4K Ultra HD
videos.
Video jacks
n
VIDEO jacks
Transmit analog video signals. Use a video pin cable.
Audio jacks
n
OPTICAL jacks
Transmit digital audio signals. Use a digital optical cable. Remove the tip protector (if available) before using the cable.
COAXIAL jacks
Transmit digital audio signals. Use a digital coaxial cable.
AUDIO jacks
(Stereo L/R jacks)
Transmit analog stereo audio signals. Use a stereo pin cable (RCA cable).
(Stereo mini jack)
Transmits analog stereo audio signals. Use a stereo mini-plug cable.
18
En
HDMI
HDMI
HDMI
AUDIO 1
(TV)
OPTICAL
OPTICAL
O O
HDMI
HDMI
HDMI
AUDIO 1
(TV)
OPTICAL
OPTICAL
O O
The unit (rear)
AUDIO 1 (OPTICAL) jack
HDMI OUT jack HDMI input
Audio output
(digital optical)
TV
VIDEO
AUDIO 1
(TV)
OPTICAL
OPTICAL
O O
MONITOR
OUT
V
V
The unit (rear)
AUDIO 1 (OPTICAL) jack
MONITOR OUT (VIDEO) jack
Video input
(composite video)
Audio output
(digital optical)
TV

Connecting a TV

Connect a TV to the unit so that video input to the unit can be output to the TV. You can also enjoy playback of TV audio on the unit.
To maximize the performance of the unit, we recommend connecting a TV with an HDMI cable.
HDMI connection
n
Connect the TV to the unit with an HDMI cable and a digital optical cable.
Note
▪ You do not make a digital optical cable connection between the TV and the unit in the following cases:
– If your TV supports Audio Return Channel (ARC)
– If you will receive TV broadcasts only from the set-top box
▪ If you connect a TV that supports HDMI Control to the unit with an HDMI cable, you can control the unit’s
power and volume with the TV’s remote control.
To use HDMI Control and ARC, you need to configure the HDMI settings on the unit. For details on the settings, see “Information on HDMI”
(p.79).
Composite video connection
n
When connecting any video device with a video pin cable, connect the TV to the MONITOR OUT
Note
▪ If you connect your TV to the unit with a cable other than HDMI, video input to the unit via HDMI cannot be
output to the TV.
▪ Operations with TV screen are available only when your TV is connected to the unit via HDMI.
▪ If you will receive TV broadcasts only from the set-top box, you do not need to make an audio cable
connection between the TV and the unit.
VIDEO (composite video) connection
(VIDEO) jack.
Connect the TV to the unit with a video pin cable and a digital optical cable.
About Audio Return Channel (ARC)
▪ ARC allows audio signals to travel both ways. If you connect a TV that supports ARC to the unit with a
single HDMI cable, you can output video/audio to the TV or input TV audio to the unit.
▪ When using ARC, connect a TV with an HDMI cable that supports ARC.
19
En
HDMI
HDMI
HDMI
The unit (rear)
HDMI OUT jack
HDMI 1–4 jacks
Video device
R
L
COAXIAL
R
L
COAXIAL
VIDEO
VIDEO
C C
L
R
L
R
V
V
The unit (rear)
AV 1 (COAXIAL) jack or AV 2–3
(AUDIO) jacks
AV 1–3 (VIDEO) jacks
Video output
(composite video)
Audio output
(digital coaxial or analog
stereo)
Video device

Connecting video devices (such as BD/DVD players)

Connect video devices such as BD/DVD players, set-top boxes (STBs) and game consoles to the unit. Depending on the video/audio output jacks available on your video device, choose one of the following connections. We recommend using an HDMI connection if the video device has an HDMI output jack.
Note
If the combination of video/audio input jacks available on the unit does not match your video device, change its combination according to the output jacks of your device (p.21).
HDMI connection
n
Connect a video device to the unit with an HDMI cable.
Composite video connection
n
Connect a video device to the unit with a video pin cable and an audio cable (digital coaxial or stereo pin cable). Choose a set of input jacks (on the unit) depending on the audio output jacks available on your video device.
Output jacks on video device
Video Audio
Composite video
Digital coaxial AV 1 (VIDEO + COAXIAL)
Analog stereo AV 2–3 (VIDEO + AUDIO)
Digital optical
Input jacks on the unit
You need to change the combination
of video/audio input jacks (p.21).
If you select HDMI 1–4 as the input source by pressing INPUT, the video/audio played back on the video device will be output from the unit.
Note
To watch videos input to the HDMI 1–4 jacks, you need to connect your TV to the HDMI OUT jack of the unit (p.19).
If you select AV 1-3 as the input source by pressing INPUT, the video/audio played back on the video device will be output from the unit.
Note
To watch videos input to the AV 1–3 (VIDEO) jacks, you need to connect your TV to the MONITOR OUT (VIDEO) jack of the unit (p.19).
20
En
VIDEO
AUDIO 1
(TV)
OPTICAL
OPTICAL
O O
V
V
The unit (rear)
AUDIO 1 (OPTICAL) jack
AV 2 (VIDEO) jack
Video output
(composite video)
Audio output
(digital optical)
Video device
MUTE
TOP MENU
HOME
POP-UP/MENU
DISPLAYRETURN
SETUP
OPTION
ENTER
TUNING
PRESET
MUTE
TUNING
MEMORY
TOP MENU
HOME
POP-UP/MENU
DISPLAYRETURN
SETUP
OPTION
ENTER
FM/AM
VOLUME
PROGRAM
USB
STRAIGHT
ENHANCER BASS
BLUETOOTH
INPUT
BD DVD
TV
CD
SCENE
RADIO
SLEEP
BLUE
YELLOW
GREEN
RED
MUTE
TO
P MENU
HOME
POP-UP/MENU
DISPLA
OPTION
ENTER
Cursor keys
MUTE
ENHANCER
STEREO
TUNED
SLEEP
OUT
ECO
CHARGE
ADAPTIVE DRC
VIRTUAL
Audio In
VOL.
MUTE
ENHANCER
STEREO
TUNED
SLEEP
OUT
ECO
CHARGE
ADAPTIVE DRC
VIRTUAL
Audio••AUDIO 1
VOL.
Changing the combination of video/audio input jacks
n
If the combination of video/audio input jacks available on the unit does not match your video device, change its combination according to the output jacks of your device. You can connect a video device that has the following video/audio output jacks.
Output jacks on video device Input jacks on the unit
Video Audio Video Audio
Digital optical HDMI 1–4 AUDIO 1 (OPTICAL)
HDMI
Digital coaxial HDMI 1–4
AUDIO 2 (COAXIAL)
AV 1 (COAXIAL)
Analog stereo HDMI 1–4 AV 2–3 (AUDIO)
Composite video Digital optical AV 1–3 (VIDEO) AUDIO 1 (OPTICAL)
Necessary setting
For example, if you have connected a video device to AV 2 (VIDEO) and AUDIO 1 (OPTICAL) jack of the unit, change the combination setting as follows.
Press OPTION.
3
Use the cursor keys (q/w) to select “Audio In” and press
4
ENTER.
Use the cursor keys (e/r) to select “AUDIO 1” (audio input
5
jack to be used).
Press OPTION.
6
This completes the necessary settings.
If you select “AV 2” as the input source by pressing INPUT, the video/audio
played back on the video device will be output from the unit.
After connecting external devices (such as a TV and playback
1
devices) and power cable of the unit, turn on the unit.
Press INPUT to select “AV 2” (video input jack to be used) as
2
the input source.
21
En
R
L
COAXIAL
OPTICAL
R
L
COAXIAL
OPTICAL
C C
L
R
L
R
O O
The unit (rear)
AV 1–3 jacks
AUDIO 1–2 jacks
Audio output
(either digital optical, digital coaxial,
or analog stereo)
Audio device
AUX
TONE
CONTROL
STRAIGHT
TV
BD DVD
CD
RADIO
INPUT
PROGRAM
AUDIO
USB
The unit (front)
Portable audio player

Connecting audio devices (such as CD players)

Connecting to the jack on the front panel

Connect audio devices such as CD players and MD players to the unit. Depending on the audio output jacks available on your audio device, choose one of the following connections.
Audio output jacks on audio device Audio input jacks on the unit
Digital optical AUDIO 1 (OPTICAL)
Digital coaxial
AUDIO 2 (COAXIAL)
AV 1 (COAXIAL)
Analog stereo AV 2–3 (AUDIO)
If you select AV 1-3 or AUDIO 1-2 as the input source by pressing INPUT, the audio played back on the audio device will be output from the unit.
Use the AUX jack on the front panel to temporarily connect devices such as portable audio players to the unit.
Before making a connection, stop playback on the device and turn down the volume on the unit.
If you select “AUX” as the input source by pressing INPUT, the audio played back on the device will be output from the unit.
Note
▪ You need to prepare the audio cable that matches the output jacks on your device.
▪ For details on how to connect a USB storage device, see “Connecting a USB storage device” (p.44).
22
En
The unit (rear)
FM antenna
AM antenna
ReleaseHold down Insert
VOLTAGE
SELECTOR
110V
–
120V
220V
–
240V
The unit (rear) VOLTAGE SELECTOR
The unit (rear)
To an AC wall outlet

4 Connecting the FM/AM antennas

5 Connecting the power cable

Connect the supplied FM/AM antennas to the unit.
Fix the end of the FM antenna to a wall, and place the AM antenna on a flat surface.
Assembling and connecting the AM antenna
Warning
(Taiwan, Brazil and General models only)
Make sure you set VOLTAGE SELECTOR of the unit BEFORE plugging the power cable into an AC wall outlet. Improper setting of fire hazard.
Before connecting the power cable
Set the switch position of VOLTAGE SELECTOR according to your local voltage. Voltages are AC 110– 120/220–240 V, 50/60 Hz.
VOLTAGE SELECTOR
may cause damage to the unit and create a potential
After all the connections are complete, plug in the power cable.
Note
▪ Unwind only the length of cable needed from the AM antenna unit.
▪ The wires of the AM antenna have no polarity.
23
En

6 Selecting an on-screen menu language

Setup
Speaker
HDMI
Sound
ECO
Function
Language
Back
RETURN
Language
English
日本語
Français
Deutsch
Español
Русский
Italiano
中文
Select the desired on-screen menu language.
Press z (receiver power) to turn on the unit.
1
Turn on the TV and switch the TV input to display video from the
2
unit (HDMI OUT jack).
Note
Operations with TV screen are available only when your TV is connected to the unit via HDMI. If not, carry out operations while viewing the front display.
Press SETUP.
3
Use the cursor keys to select “Language” and press ENTER.
4
Use the cursor keys to select the desired language.
5
To exit from the menu, press SETUP.
6
Note
The information on the front display is provided in English only.
24
En
VOLUME HIGH CUT
CROSSOVER/
MIN MAXMIN MAX
9
1 2
3
9
4 5
The unit (front)
Ear height
Auto Setup
Start
Exit

7 Optimizing the speaker settings automatically (YPAO)

The Yamaha Parametric room Acoustic Optimizer (YPAO) function detects speaker connections, measures the distances from them to your listening position(s), and then automatically optimizes the speaker settings, such as volume balance and acoustic parameters, to suit your room.
Note
▪ When you use the front 5.1-channel speaker (Virtual CINEMA FRONT) configuration (p.13), set “Virtual
CINEMA FRONT” (p.55) in the “
▪ Please note the following when using YPAO.
– Use YPAO after connecting a TV and speakers to the unit.
– During the measuring process, test tones are output at high volume. Ensure that the test tones do not
frighten small children.
– During the measuring process, you cannot adjust the volume.
– During the measuring process, keep the room as quiet as possible.
– Do not connect headphones.
– Do not stand between the speakers and the YPAO microphone during the measurement process (about
3 minutes).
Press z (receiver power) to turn on the unit.
1
Turn on the TV and switch the TV input to display video from the
2
unit (HDMI OUT jack).
Note
Operations with TV screen are available only when your TV is connected to the unit via HDMI. If not, carry out operations while viewing the front display.
” menu to “On” beforehand.
Setup
Place the YPAO microphone at your listening position and
4
connect it to the YPAO MIC jack on the front panel.
Note
Place the YPAO microphone at your listening position (same height as your ears). We recommend the use of a tripod as a microphone stand. You can use the tripod screws to stabilize the microphone.
Turn on the subwoofer and set the volume to half. If the crossover
3
frequency is adjustable, set it to maximum.
25
The following screen appears on the TV.
En
Auto Setup
Meaurement Finished
Result
3 / 2 / 0.1 ch
3.0 / 10.5 m
-3.0 / +10.0 dB
OK
ENTER
1 2
3 4
Auto Setup
Start
Exit < SAVE >
To start the measurement, use the cursor keys to select “Start”
5
and press ENTER.
The measurement will start in 10 seconds. Press ENTER to start the
measurement immediately.
Note
To stop the measurement temporarily, press RETURN and follow the procedure in “Error messages”
The following screen appears on the TV when the measurement finishes.
(p.27).
Use the cursor keys (e/r) to select “SAVE” and press ENTER.
7
The adjusted speaker settings are applied.
Note
To finish the measurement without saving the result, select “CANCEL”.
Disconnect the YPAO microphone from the unit.
8
This completes optimization of the speaker settings.
1
The number of speakers (front side/rear side/subwoofer)
2
Speaker distance (nearest/farthest)
3
Adjustment range of speaker output level
4
Warning message (if available)
Note
▪ If any error message (such as E-1) or warning message (such as W-1) appears, see “Error
messages”
▪ A speaker with a problem is indicated by blinking of the speaker indicators in the front display. ▪ If multiple warnings are given (when operating with the front display), use the cursor keys (q/w)
to check the other warning messages.
Confirm the results displayed on the screen and press ENTER.
6
or “Warning messages” (p.28).
(p.27)
26
Notice
▪ The YPAO microphone is sensitive to heat, so should not be placed anywhere where it could be
exposed to direct sunlight or high temperatures (such as on top of AV equipment).
En

Error messages

Auto Setup
ERROR
E-9 : User Cancel
< RETRY >
2 %
Error message
MUTE
ENHANCER
STEREO
TUNED
SLEEP
OUT
ECO
CHARGE
ADAPTIVE DRC
VIRTUAL
E-5:NOISY
VOL.
If any error message is displayed during the measurement, resolve the problem and perform YPAO again.
TV screen
Front display
n
1 2
Procedure to handle errors
Check the content of error message and press ENTER.
Use the cursor keys (e/r) to select the desired operation.
To exit the YPAO measurement:
Select “EXIT” and press ENTER.
1
Use the cursor keys (q/w) to select “Exit” and press ENTER.
2
Disconnect the YPAO microphone from the unit.
3
To retry the YPAO measurement from beginning:
Select “RETRY” and press ENTER.
1
To proceed with the current YPAO measurement (for E-5 and E-9 only):
Select “PROCEED” and press ENTER.
1
Error message Cause Remedy
E-1:No Front SP
(E-1:NO FRNT SP)
E-2:No Sur. SP
(E-2:NO SUR SP)
E-5:Noisy
(E-5:NOISY)
E-7:No MIC
(E-7:NO MIC)
E-8:No Signal
(
E-8:NO SIGNAL)
E-9:User Cancel
(E-9:CANCEL)
E-10:Internal Err.
(E-10:INTERNAL)
Note
Texts in parentheses denote indicators on the front display.
27
En
Front speakers are not detected.
One of the surround speakers cannot be detected.
The noise is too loud.
The YPAO microphone has been removed.
The YPAO microphone cannot detect test tones.
The measurement has been canceled.
An internal error has occurred.
Exit YPAO, turn off the unit, and then check the speaker connections.
Keep the room quiet and retry YPAO. If you select “PROCEED”, YPAO takes the measurement again and ignores any noise detected.
Connect the YPAO microphone to the YPAO MIC
Connect the YPAO microphone to the YPAO MIC this error occurs repeatedly, contact the nearest authorized Yamaha dealer or service center.
Retry or exit YPAO as necessary.
Exit YPAO, and turn off and on the unit. If this error occurs repeatedly, contact the nearest authorized Yamaha dealer or service center.
jack firmly and retry YPAO.
jack firmly and retry YPAO. If
Loading...
+ 60 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use