GB
RX-V440RDS
AV Receiver
Ampli-tuner audio-vidéo
OWNER’S MANUAL MODE D’EMPLOI BEDIENUNGSANLEITUNG BRUKSANVISNING MANUALE DI ISTRUZIONI
MANUAL DE INSTRUCCIONES GEBRUIKSAANWIJZING
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
1To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference.
2Install this sound system in a well ventilated, cool, dry, clean place — away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold.
Allow ventilation space of at least 30 cm on the top, 20 cm on the left and right, and 20 cm on the back of this unit.
3Locate this unit away from other electrical appliances, motors, or transformers to avoid humming sounds.
4Do not expose this unit to sudden temperature changes from cold to hot, and do not locate this unit in a environment with high humidity (i.e. a room with a humidifier) to prevent condensation inside this unit, which may cause an electrical shock, fire, damage to this unit, and/or personal injury.
5Avoid installing this unit where foreign object may fall onto this unit and/or this unit may be exposed to liquid dripping or splashing. On the top of this unit, do not place:
–Other components, as they may cause damage and/or discoloration on the surface of this unit.
–Burning objects (i.e. candles), as they may cause fire, damage to this unit, and/or personal injury.
–Containers with liquid in them, as they may fall and liquid may cause electrical shock to the user and/or damage to this unit.
6Do not cover this unit with a newspaper, tablecloth, curtain, etc. in order not to obstruct heat radiation. If the temperature inside this unit rises, it may cause fire, damage to this unit, and/or personal injury.
7Do not plug in this unit to a wall outlet until all connections are complete.
8Do not operate this unit upside-down. It may overheat, possibly causing damage.
9Do not use force on switches, knobs and/or cords.
10When disconnecting the power cord from the wall outlet, grasp the plug; do not pull the cord.
11Do not clean this unit with chemical solvents; this might damage the finish. Use a clean, dry cloth.
12Only voltage specified on this unit must be used. Using this unit with a higher voltage than specified is dangerous and may cause fire, damage to this unit, and/or personal injury. YAMAHA will not be held responsible for any damage resulting from use of this unit with a voltage other than specified.
13To prevent damage by lightning, disconnect the power cord from the wall outlet during an electrical storm.
14Do not attempt to modify or fix this unit. Contact qualified YAMAHA service personnel when any service is needed. The cabinet should never be opened for any reasons.
15When not planning to use this unit for long periods of time (i.e. vacation), disconnect the AC power plug from the wall outlet.
16Be sure to read the “TROUBLESHOOTING” section on common operating errors before concluding that this unit is faulty.
17Before moving this unit, press STANDBY/ON to set this unit in standby mode, and disconnect the AC power plug from the wall outlet.
18VOLTAGE SELECTOR (China and General models only) The VOLTAGE SELECTOR on the rear panel of this unit must be set for your local main voltage BEFORE plugging into the AC main supply. Voltages are 110/120/220/240 V AC, 50/60 Hz.
This unit is not disconnected from the AC power source as long as it is connected to the wall outlet, even if this unit itself is turned off. This state is called standby mode. In this state, this unit is designed to consume a very small quantity of power.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
■ For U.K. customers
If the socket outlets in the home are not suitable for the plug supplied with this appliance, it should be cut off and an appropriate 3 pin plug fitted. For details, refer to the instructions described below.
Note
•The plug severed from the mains lead must be destroyed, as a plug with bared flexible cord is hazardous if engaged in a live socket outlet.
■ Special Instructions for U.K. Model
IMPORTANT
THE WIRES IN MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE:
Blue: NEUTRAL
Brown: LIVE
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:
The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED.
Making sure that neither core is connected to the earth terminal of the three pin plug.
CAUTION
CONTENTS
INTRODUCTION |
|
CONTENTS ............................................................ |
1 |
FEATURES ............................................................. |
2 |
GETTING STARTED ............................................ |
3 |
Supplied accessories .................................................. |
3 |
Installing batteries in the remote control ................... |
3 |
CONTROLS AND FUNCTIONS ......................... |
4 |
Front panel ................................................................. |
4 |
Remote control .......................................................... |
6 |
Front panel display .................................................... |
8 |
PREPARATION |
|
CONNECTIONS .................................................... |
9 |
Before connecting components ................................. |
9 |
Connecting video components ................................ |
10 |
Connecting audio components ................................ |
12 |
Connecting the antennas .......................................... |
13 |
Connecting an external decoder .............................. |
14 |
Connecting the speakers .......................................... |
15 |
Connecting the power supply cords ........................ |
18 |
Turning on the power .............................................. |
18 |
BASIC SYSTEM SETTINGS ............................. |
19 |
Using the basic menu .............................................. |
19 |
Setting the unit to match your speaker system ........ |
21 |
Setting speaker output levels (SP LEVEL) ............. |
21 |
BASIC OPERATION |
|
PLAYBACK .......................................................... |
22 |
Input modes and indications .................................... |
24 |
Selecting a sound field program .............................. |
25 |
DIGITAL SOUND FIELD PROCESSING (DSP) |
|
............................................................................ |
28 |
Understanding sound fields ..................................... |
28 |
Hi-Fi DSP programs ................................................ |
28 |
CINEMA-DSP ...................................................... |
29 |
Sound design of CINEMA-DSP ............................. |
29 |
CINEMA-DSP Programs ........................................ |
29 |
Sound field effects ................................................... |
31 |
TUNING ................................................................ |
32 |
Presetting stations .................................................... |
33 |
Selecting a preset station ......................................... |
35 |
RECEIVING RDS STATIONS ........................... |
36 |
Description of RDS data ......................................... |
36 |
Changing the RDS mode ......................................... |
36 |
PTY SEEK function ................................................ |
37 |
EON function .......................................................... |
37 |
SLEEP TIMER ..................................................... |
38 |
RECORDING ....................................................... |
39 |
ADVANCED OPERATION |
|
SET MENU ........................................................... |
40 |
Set menu list ............................................................ |
40 |
Adjusting the items on the set menu ....................... |
40 |
SOUND 1 SPEAKER SET (speaker mode settings) |
|
............................................................................. |
41 |
SOUND 2 SP DISTANCE (speaker distance) ........ |
43 |
SOUND 3 LFE LEVEL .......................................... |
43 |
SOUND 4 D. RANGE (dynamic range) ................. |
43 |
SOUND 5 CENTER GEQ |
|
(center graphic equalizer) .................................... |
44 |
SOUND 6 HP TONE CTRL |
|
(headphone tone control) .................................... |
44 |
INPUT 1 I/O ASSIGN (input/output assignment) .. |
44 |
INPUT 2 INPUT MODE (initial input mode) ........ |
44 |
OPTION 1 DISPLAY SET ...................................... |
45 |
OPTION 2 MEM. GUARD (memory guard) ......... |
45 |
OPTION 3 AUDIO MUTE ..................................... |
45 |
OPTION 4 ZONE SET ........................................... |
45 |
REMOTE CONTROL FEATURES ................... |
46 |
Control area ............................................................. |
46 |
Setting the manufacturer code ................................. |
47 |
Controlling other components ................................. |
48 |
SETTING THE SPEAKER LEVELS ................ |
49 |
Adjusting the volume during playback ................... |
49 |
Using the test tone ................................................... |
49 |
ADDITIONAL INFORMATION |
|
SOUND FIELD PROGRAM PARAMETER |
|
EDITING .......................................................... |
50 |
Changing parameter settings ................................... |
50 |
Digital sound field parameter descriptions .............. |
51 |
TROUBLESHOOTING ....................................... |
52 |
GLOSSARY .......................................................... |
56 |
SPECIFICATIONS .............................................. |
58 |
INTRODUCTION |
|
|
|
|
|
PREPARATION |
|
|
|
|
|
OPERATION |
BASIC |
|
|
|
|
OPERATION |
ADVANCED |
|
|
|
|
INFORMATION |
ADDITIONAL |
|
|
English
1
|
|
FEATURES |
Built-in 6-channel power amplifier |
Multi-mode digital sound field processing |
|
Minimum RMS output power |
Dolby Pro Logic/Dolby Pro Logic II decoder |
|
(0.06% THD, 20 Hz – 20 kHz, 8Ω) |
Dolby Digital/Dolby Digital EX decoder |
|
[U.S.A. and Canada models] |
DTS/DTS-ES Matrix 6.1, Discrete 6.1, DTS Neo:6 |
|
Main: |
75 W + 75 W |
Decoder |
Center: |
75 W |
CINEMA DSP: Combination of YAMAHA DSP |
Rear: |
75 W + 75 W |
technology and Dolby Pro Logic, Dolby Digital or |
Rear center: |
75 W |
DTS |
[Other models] |
|
Virtual CINEMA DSP |
Main: |
65 W + 65 W |
SILENT CINEMA DSP |
Center: |
65 W |
Sophisticated AM/FM Tuner |
Rear: |
65 W + 65 W |
|
Rear center: |
65 W |
40-Station random access preset tuning |
|
|
Automatic preset tuning |
|
|
Preset station shifting capability (Preset editing) |
Other features
96 kHz/24-bit D/A converter
Set menu for optimizing this unit for your Audio/ Video system
Test tone generator for easier speaker balance adjustment
6-channel external decoder input
Component video input/output capability
Optical and coaxial digital audio signal jacksSleep timer
Remote control with preset manufacturer codesZone B capability
■ About this manual
•y indicates a tip for your operation.
•Some operations can be performed by using either the buttons on the main unit or on the remote control. In cases when the button names differ between the main unit and the remote control, the button name on the remote control is given in parentheses.
•This manual is printed prior to production. Design and specifications are subject to change in part for the reason of the improvement in operativity ability, and others. In this case, the product has priority.
Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories.
“DTS”, “DTS-ES Extended Surround” and “Neo:6” are trademarks of Digital Theater System, Inc.
2
GETTING STARTED
Supplied accessories
After unpacking, check that the following parts are contained.
Remote control |
Batteries (2) |
|||
|
|
|
|
(AA, R06, UM-3) |
POWER POWER |
STANDBY |
SYSTEM |
|
|
POWER |
|
|||
TV |
AV |
|
|
|
CD |
MD/CD-R |
TUNER |
SLEEP |
|
DVD |
D-TV/CBL |
VCR |
V-AUX |
|
REC |
|
|
6CH INPUT |
|
|
|
AUDIO |
|
|
DISC SKIP |
|
CODE SET |
|
|
|
|
|
AMP |
75-ohm/300-ohm antenna |
|
TV |
|
|
|
|
|
|
adapter (U.K. model) |
|
+ |
+ |
|
+ |
|
VOL |
CH |
VOLUME |
|
AM loop antenna
Indoor FM antenna (U.S.A., Canada, China, Korea and General models)
– |
– |
|
– |
|
MUTE |
INPUT |
|
|
|
|
|
MUTE |
|
|
HALL |
JAZZ |
ROCK |
ENTERTAINMENT |
|
1 |
2 |
3 |
4 |
|
MUSIC |
TV THTR MOVIE1 |
MOVIE2 |
|
|
5 |
6 |
7 |
8 |
|
/DTS |
NIGHT |
6.1/5.1 |
STEREO |
|
9 |
0 |
+10 |
ENTER |
|
LEVEL |
|
|
SET MENU |
|
TITLE |
|
|
MENU |
|
|
|
|
A/B/C/D/E |
(Europe, U.K., Australia and |
– |
SELECT |
+ |
||
TEST |
|
|
|
Singapore models) |
RETURN |
PRESET/CH |
DISPLAY |
Installing batteries in the remote
control
Insert the batteries in the correct direction by aligning the + and – marks on the batteries with the polarity markings (+ and –) inside the battery compartment.
2
1
3
1 Press the part marked with a and slide off the battery compartment cover.
2 Insert the four batteries supplied (AA, R06,
UM-3) according to the polarity markings on the inside of the battery compartment.
3 Slide the cover back on so that it snaps into place.
■ Notes on batteries
•Change all of the batteries if you notice a decrease in the operating range of the remote control, that the indicator does not flash, or the light becoming dim.
•Do not use old batteries together with new ones.
•Do not use different types of batteries (such as alkaline and manganese batteries) together. Read the packaging carefully as these different types of batteries may have the same shape and color.
•If the batteries have leaked, dispose of them immediately. Avoid touching the leaked material or letting it come into contact with clothing, etc. Clean the battery compartment thoroughly before installing new batteries.
If the remote control is without batteries for more than 2 minutes, or if exhausted batteries remain in the remote control, the contents of the memory may be cleared. When the memory is cleared, insert new batteries, set up the manufacturer code and program any acquired functions that may have been cleared.
INTRODUCTION
English
3
CONTROLS AND FUNCTIONS
Front panel
1 2 |
|
3 4 |
|
5 |
|
6 |
|
7 8 |
9 0 |
|
q |
|
|
|
|
|
|
|
|
|
|
|
|
VOLUME |
|
|
INPUT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
RDS MODE/FREQ |
EON |
|
|
|
|
PRESET/TUNING FM/AM |
|
|
|
STANDBY |
|
|
EDIT |
|
|
|
|
|
EDIT |
|
|
|
/ON |
|
|
PTY SEEK |
|
|
|
|
|
|
|
|
|
|
|
|
MODE |
START |
|
|
|
|
TUNING MODE |
MEMORY |
|
|
|
|
|
|
|
|
|
|
|
AUTO/MANUAL MONO MAN`L/AUTO FM |
|
|
|
INPUT MODE |
6CH INPUT |
|
|
|
|
|
|
|
|
|
|
|
SILENT |
SPEAKERS |
STEREO |
|
PROGRAM |
A/B/C/D/E |
PRESET/TUNING |
CONTROL |
BASS/TREBLE |
|
VIDEO AUX |
|
|
|
|
|
|
|
||||||||
A |
|
B |
|
|
|
|
|
|
|
|
|
|
|
|
|
EFFECT |
|
|
NEXT |
SET MENU |
|
|
|
|
|
PHONES |
|
|
|
|
|
|
|
|
|
VIDEO |
L AUDIO |
R |
w |
e |
r |
|
t |
y |
u |
i |
o |
|
p |
|
|
|
|
|
RDS MODE/FREQ |
EON |
|
|
|
|
|
|
|
PTY SEEK
MODE START
a s d f
(U.K. and Europe models only)
1 STANDBY/ON
Turns the unit on, or sets it in standby mode. When you turn the unit on, you will hear a click and there will be a 4 to 5-second delay before it can reproduce sound.
Standby mode
In this mode, the unit uses a small amount of power in order to receive infrared-signals from the remote control.
2 INPUT MODE
Sets the priority for the types of input signals (AUTO, DTS, ANALOG) received when one component is connected to two or more input jacks. You cannot set priority for an audio source if you have selected 6CH INPUT as the input source.
3 INPUT
Selects the input source you want to listen to or watch.
4 6CH INPUT
Selects the audio source connected to the 6CH INPUT jacks. This selection takes priority over sources selected with INPUT (or the input selector buttons on the remote control).
5 Remote control sensor
Receives signals from the remote control.
6 Front panel display
Shows information about the operational status of the unit.
7 TUNING MODE (AUTO/MAN’L MONO)
Switches the tuning mode between automatic and manual.
8 PRESET/TUNING (EDIT)
Switches the function of PRESET/TUNING l/ h between selecting a preset station number and tuning (the colon (:) turns on or off).
This button is also used to exchange the assignment of two preset stations with each other.
9 FM/AM
Switches the reception band between FM and AM.
0 MEMORY (MAN’L/AUTO FM)
Stores the current station in memory.
q VOLUME
Controls the output level of all audio channels. This does not affect the OUT (REC) level.
4
w SILENT (PHONES jack)
Allows you to enjoy DSP effects when listening with headphones. When you connect headphones to the headphone jack, no signals are output to the speakers.
e SPEAKERS A/B
Turns the set of main speakers connected to the A and/or B terminals on or off.
r STEREO/EFFECT
Switches between normal stereo and DSP effect reproduction. When you select STEREO, the unit mixes down all Dolby Digital and DTS signals (except the LFE channel) as well as those 2-channel signals without effects, to the main left and right speakers.
t PROGRAM l / h
Select the DSP program.
y A/B/C/D/E
Selects preset station groups A to E when the unit is in tuner mode.
NEXT
Selects the set menu mode when the unit is not in tuner mode.
u PRESET/TUNING l / h
Select preset station numbers 1 to 8 when a colon (:) is displayed in the front panel display.
Select the tuning frequency when a colon (:) is not displayed when the unit is in tuner mode.
SET MENU –/+
Adjust settings on the set menu when the unit is not in tuner mode.
i CONTROL
Switches between Bass (low-frequency response) control mode and Treble (high-frequency response) control mode.
o BASS/TREBLE –/+
Increase or decrease low/high-frequency response when the unit is in Bass/Treble control mode. The sound changes 2dB each time you press one of these buttons. Control range: –10 to +10dB
p VIDEO AUX jacks
Inputs for audio and video signals from a portable external source (game console, etc.). Set the input source to V-AUX to select source signals from these jacks.
CONTROLS AND FUNCTIONS
(U.K. and Europe models only)
a RDS MODE/FREQ
Press this button when the unit is receiving an RDS station, to cycle the display mode among PS mode, PTY mode, RT mode, CT mode (if the station offers those RDS data service) and/or frequency display mode in turn.
s PTY SEEK MODE
Press this button to set the unit in the PTY SEEK mode.
d PTY SEEK START
Press this button to begin searching for a station after the desired program type has been selected in the PTY SEEK mode.
f EON
Press this button to select a radio program type (NEWS, INFO, AFFAIRS, SPORT) to tune in automatically.
INTRODUCTION
English
5
CONTROLS AND FUNCTIONS
Remote control
This section describes the remote control controls and their functions. Make sure that the AMP mode is selected before starting operation.
1 |
|
|
|
|
7 |
|
POWER |
POWER |
STANDBY |
SYSTEM |
|
|
POWER |
|
|||
|
TV |
AV |
|
|
8 |
|
CD |
MD/CD-R |
TUNER |
SLEEP |
9 |
2 |
|
|
|
|
|
DVD |
D-TV/CBL |
VCR |
V-AUX |
|
|
|
REC |
|
|
6CH INPUT |
|
|
|
|
AUDIO |
|
0 |
|
DISC SKIP |
|
|
CODE SET |
|
|
|
|
|
|
q |
|
|
|
|
AMP |
w |
|
|
|
|
|
|
|
TV |
|
|
|
|
|
+ |
+ |
|
+ |
|
|
VOL |
CH |
VOLUME |
e |
|
|
– |
– |
|
– |
|
|
MUTE |
INPUT |
|
|
r |
|
|
|
MUTE |
||
|
HALL |
JAZZ |
ROCK |
ENTERTAINMENT |
|
|
1 |
2 |
3 |
4 |
|
3 |
MUSIC |
TV THTR |
MOVIE1 |
MOVIE2 |
|
5 |
6 |
7 |
8 |
t |
|
|
/DTS |
NIGHT |
6.1/5.1 |
STEREO |
|
|
9 |
0 |
+10 |
ENTER |
yu |
|
|
||||
|
LEVEL |
|
|
SET MENU |
i |
4 |
TITLE |
|
|
MENU |
|
5 |
|
|
|
A/B/C/D/E |
|
– |
SELECT |
+ |
|
||
|
TEST |
|
|
|
|
6 |
RETURN |
|
|
DISPLAY |
|
PRESET/CH
1 Infrared window
Outputs infrared control signals. Aim this window at the component you want to operate.
2 Input selector buttons
Select the input source and set the remote control to operate the selected source component.
3 DSP program
Select DSP programs when the remote control is in AMP mode. Press one of these buttons repeatedly to select a DSP program within a program group.
4 LEVEL
Selects the effect speaker channel to adjust.
5 Multi control section
Used to change and implement settings.
6 TEST
Outputs a test tone for use when adjusting the speaker levels.
7 STANDBY
Sets this unit in standby mode.
8 SYSTEM POWER
Turns on the power of the unit.
9 SLEEP
Sets the sleep timer.
0 6CH INPUT
Selects the audio source connected to the 6CH INPUT jacks.
q CODE SET
Used to set up manufacturer codes (see page 47).
w AMP
Switches the function of the same controls between AMP and the component selected using the input selector buttons.
e VOLUME +/–
Increases or decreases the volume level.
6
r MUTE
Mutes the sound. Press again to restore the audio output to the previous volume level.
t 6.1/5.1
Switches the Dolby Digital EX or DTS ES decoder on or off.
y STEREO
Switches between normal stereo and DSP effect reproduction. When you select STEREO the unit mixes down all Dolby Digital and DTS signals (except the LFE channel) as well as those 2-channel signals without effect sounds, to the main left and right speakers.
u NIGHT
Sets the unit in night listening mode.
i SET MENU
Selects the set menu mode.
CONTROLS AND FUNCTIONS
■ Using the remote control
30° |
30° |
Approximately 6 m (20 feet) |
INTRODUCTION |
|
|||
|
|
|
+ + +
– |
– |
– |
– +
The remote control transmits a directional infrared beam. Be sure to aim the remote control directly at the remote control sensor on the main unit during operation.
■ Handling the remote control
•Do not spill water or other liquids on the remote control.
•Do not drop the remote control.
•Do not leave or store the remote control in the following types of conditions:
–high humidity or temperature such as near a heater, stove or bath;
–dusty places; or
–in places subject to extremely low temperatures.
English
7
CONTROLS AND FUNCTIONS
Front panel display
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
ES |
|
VCR |
V-AUX |
D-TV/CBL |
DVD |
MD/CD-R |
TUNER |
CD |
|
VIRTUAL |
|
NIGHT |
|
|
|
|
|
MUTE VOLUME |
|
MATRIX DISCRETE |
SP |
|
|
|
PS PTY RT CT |
STEREO AUTO |
|||
DIGITAL |
SILENT |
A B |
HiFi DSP |
|
|
EON PTY HOLD TUNED MEMORY |
SLEEP |
EX |
~~~~~~~~~~~~~~dB |
L C R |
|
PCM PL |
|
f t |
|
PL |
|
|
LFE RL RC RR |
9 |
0 q w e r t |
y u i o p a |
|
|
|
s (U.K. and Europe models only) |
1 Processor indicators
The indicators for the various decoders light up when the decoders are in use.
2 VIRTUAL indicator
Lights up when using Virtual CINEMA DSP.
3 Headphones indicator
Lights up when headphones are connected to the headphone jack.
4 Input source indicator
Highlights the current input source with a cursor.
5 Sound field indicator
Displays the sound field management the unit is using when you listen to a DSP sound field program.
6 AUTO indicator
Shows that this unit is in the automatic tuning mode.
7 MUTE indicator
Flashes while the MUTE function is on.
8 VOLUME level indicator
Indicates the volume level.
9 PCM indicator
Lights up when this unit is reproducing PCM (pulse code modulation) digital audio signals.
0 SILENT indicator
Lights up when headphones are connected and the digital sound field processor is on.
q SP A B indicator
Lights up to indicate which set of main speakers is selected. Both indicators light up when both sets of speakers are selected.
w NIGHT indicator
Lights up when the unit is set to night listening mode.
e HiFi DSP indicator
Lights up when you select a Hi-Fi DSP sound field program.
r CINEMA DSP indicator
Lights up when you select a CINEMA DSP sound field program.
t Multi-information display
Shows the current DSP program name and other information when you are adjusting or changing settings.
y STEREO indicator
Lights up when the unit is receiving a strong signal from a FM stereo broadcast while the “AUTO” indicator is lit.
u TUNED indicator
Lights up when this unit is tuned to a radio station.
i MEMORY indicator
Flashes to show a station can be stored in memory.
o SLEEP indicator
Lights up while the sleep timer is on.
p LFE indicator
Lights up when the input signal contains an LFE signal.
a Input channel indicator
The indicators for the appropriate sound channels light up when a digital signal from a source is played back.
s RDS indicator (U.K. and Europe models only)
The name(s) of the RDS data offered by the currently received RDS station light(s) up.
EON indicator lights up when an RDS station that offers the EON data service is being received.
PTY HOLD indicator lights up while searching for stations in the PTY SEEK mode.
8
CONNECTIONS
Before connecting components
CAUTION
Do not connect this unit or other components to the mains power until all connections between the components have been completed.
•Be sure all connections are made correctly, that is to say L (left) to L, R (right) to R, “+” to “+” and “–” to “–”. Some components require different connection methods and have different jack names. Refer to the operation instructions for each component you wish to connect to this unit.
•After you have completed all connections, check them again to make sure they are correct.
•The jack names correspond to the names on the input selector.
■ Connecting to digital jacks
This unit has digital jacks for direct transmission of digital signals through either coaxial or fiber optic cables. You can use the digital jacks to input PCM, Dolby Digital and DTS bitstreams. Use digital connections if you wish to enjoy the multi-channel sound track of DVD material, etc. with DSP effects. All digital input jacks are acceptable for 96 kHz sampling digital signals.
Note
•The OPTICAL jack on this unit conform to the EIA standard. If you use a fiber optic cable that does not conform to this standard this unit may not function properly.
DIGITAL INPUT jacks |
This jack is reserved for factory use. |
|
(pages 9 – 12) |
Do not connect any equipment to this jack. |
|
Audio component jacks |
Video component jacks |
Speaker terminals |
(page 12) |
(pages 10 – 11) |
(page 17) |
PREPARATION
COMPORNENT VIDEO
PR PB Y
|
|
|
|
|
|
|
DVD |
|
|
|
AUDIO |
|
AUDIO |
VIDEO |
A |
|
|
R |
L |
R |
L |
VIDEO |
|
|
|
|
|
|
|
|
D-TV |
|
|
CD |
|
|
DVD |
|
/CBL |
DIGITAL |
|
|
|
B |
|||
INPUT |
|
|
|
|
|
|
|
CD |
2 |
|
|
|
|
|
MONITOR |
|
|
IN |
|
|
D-TV |
|
OUT |
|
|
|
|
|
|
||
|
|
(PLAY) |
|
|
/CBL |
|
|
COAXIAL |
|
MD |
|
|
|
|
|
|
/CD-R |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
OPTICAL |
|
OUT |
|
|
IN |
|
TUNER |
|
|
(REC) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
VCR |
|
R |
MAIN |
L |
SPEAKERS |
REAR |
|
|
|
|
|
|
R |
L |
||||
DVD |
1 MAIN |
|
OUT |
|
AM |
|
|
|
(SURROUND) |
|
|
|
|
|
|
ANT |
|
|
|
|
|
|
SURROUND |
|
|
|
GND |
|
|
|
|
|
|
|
|
|
|
A |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
VIDEO |
|
|
|
|
|
|
|
|
|
|
|
75Ω UNBAL. |
B |
|
|
|
|
|
|
|
|
|
FM |
|
|
|
|
|
|
SUB |
CENTER |
SUB |
MONITOR |
ANT |
|
|
|
|
|
|
WOOFER |
WOOFER |
OUT |
|
|
|
|
|
|
|
|
6CH INPUT |
OUTPUT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CENTER |
|
REAR |
|
|
|
|
|
|
|
|
|
|
CENTER |
6CH INPUT jacks |
Antenna input terminals |
(page 14) |
(page 13) |
SUBWOOFER OUTPUT jack (page 17)
AC OUTLETS (page 18)
English
9
CONNECTIONS
Connecting video components
Refer to the connection examples on the next page.
■ Types of video jacks
COMPONENT VIDEO
VIDEO
PR PB Y
12
1 VIDEO jack
Conventional composite video signal.
2COMPONENT VIDEO jacks
Transmit color difference (PB, PR) and luminance separately and provide the best quality picture.
Use the commercially available cable type specified for connecting each jack.
y
•You can designate the input for the COMPONENT VIDEO A and B jacks to suit your components by using “INPUT 1 I/O ASSIGNMENT” on the set menu.
■ Connecting a video monitor
Connect the video input jack on your video monitor to the MONITOR OUT VIDEO jack.
Note
•If you connect this unit with a source component using Component video jacks, you also need to connect your video monitor using Component video jacks.
■ Connecting a DVD player
Connect the optical digital audio signal output jack on your component to the DIGITAL INPUT jack and connect the video signal output jack on the component to the VIDEO jack on this unit.
y
•Use the AUDIO jacks on this unit for a video component which does not have optical digital output jack. However, multi-channel reproduction cannot be obtained with audio signals input from the AUDIO jacks.
■ Connecting a digital TV/cable TV
Connect the video signal output jack on your component to the VIDEO jack on this unit.
Connect the audio signal output jacks on the component to the AUDIO jacks on this unit.
■ Connecting a recording component
Connect the audio signal input jacks on your video component to the AUDIO OUT jacks on this unit. Then connect the video signal input jack on the video component to the VIDEO OUT jack on this unit for picture recording.
Connect the audio signal output jacks on your component to the AUDIO IN jacks on this unit. Then connect the video signal output jack on the component to the VIDEO IN jack on this unit to play a source from your recording component.
Note
•Once you have connected a recording component to this unit, keep its power turned on while using this unit. If the power is off, this unit may distort the sound from other components.
10
CONNECTIONS
|
L |
|
DVD player |
R |
|
AUDIO |
|
|
|
TV/digital TV/ |
|
O |
OUTPUT |
|
|
cable TV |
|
OPTICAL |
|
|
|
|
|
OUTPUT |
VIDEO |
VIDEO |
AUDIO |
||
L R OUTPUT |
OUTPUT |
OUTPUT |
|
|
|
|
|
|
|
COMPORNENT VIDEO |
|
|
|
|
|
|
|
|
|
|
PR |
PB |
Y |
|
|
|
|
|
|
|
|
DVD |
|
|
|
|
|
AUDIO |
|
AUDIO |
VIDEO |
A |
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
R |
L |
R |
L |
VIDEO |
|
|
|
|
|
|
|
|
|
|
|
D-TV |
|
|
|
|
|
CD |
|
|
DVD |
|
/CBL |
|
|
|
DIGITAL |
|
|
|
B |
|
|
|
|||
INPUT |
|
|
|
|
|
|
|
|
|
|
CD |
2 |
|
|
|
|
|
MONITOR |
|
|
|
|
|
IN |
|
|
D-TV |
|
OUT |
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
(PLAY) |
|
|
/CBL |
|
|
|
|
|
COAXIAL |
|
MD |
|
|
|
|
|
|
|
|
|
/CD-R |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TUNER |
|
|
|
|
OPTICAL |
|
OUT |
|
|
IN |
|
|
|
|
|
|
|
(REC) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
VCR |
|
|
|
|
MA |
|
1 MAIN |
|
|
|
|
|
|
R |
||
DVD |
|
|
OUT |
|
AM |
|
|
|
||
|
|
|
|
|
|
|
ANT |
|
|
|
|
|
SURROUND |
|
|
|
|
GND |
|
|
|
|
|
|
|
|
|
|
|
|
A |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
VIDEO |
|
|
|
|
|
|
|
|
|
|
|
75Ω UNBAL. |
|
|
B |
|
|
|
|
|
|
|
FM |
|
|
|
|
|
SUB |
|
|
SUB |
MONITOR |
ANT |
|
|
|
|
|
WOOFER |
CENTER |
|
WOOFER |
OUT |
|
|
|
|
|
|
6CH INPUT |
|
OUTPUT |
|
|
|
|
|
AUDIO |
AUDIO |
VIDEO |
VIDEO |
VIDEO |
OUTPUT L |
R INPUT L R |
OUTPUT |
INPUT |
INPUT |
PREPARATION
L
R
O
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
VCR |
Video monitor |
||||
indicates audio signal direction |
|
|
|
|||||
indicates left analog cables |
|
|
|
|||||
indicates right analog cables |
|
|
|
|||||
indicates optical cables |
|
|
|
|||||
indicates video signal direction |
|
|
|
English
11
CONNECTIONS
Connecting audio components
■ Connecting a CD player
Connect the coaxial digital output jack on your CD player to the DIGITAL INPUT CD jack on this unit.
y
•Use the AUDIO jacks on this unit for a CD player which does not have coaxial digital output jack.
y
•Use the AUDIO jacks on this unit for a CD recorder or MD recorder which does not have optical digital input or output jack.
Note
•Once you have connected a recording component to this unit, keep its power turned on while using this unit. If the power is off, this unit may distort the sound from other components.
■ Connecting a CD recorder or MD recorder
Connect the input jacks on your CD recorder or MD recorder to the MD/CD-R OUT (REC) jacks for analog recording.
Connect the output jacks on your CD recorder or MD recorder to the MD/CD-R IN (PLAY) jacks to play a source from your recording component.
COMPORNENT VID
PR PB
|
|
|
|
|
|
|
|
DVD |
|
|
|
|
AUDIO |
|
AUDIO |
VIDEO |
A |
|
|
|
|
|
|
|||
|
|
|
R |
L |
R |
L |
VIDEO |
|
|
|
|
|
|
|
|
|
D-TV |
COAXIAL |
DIGITAL CD |
|
|
DVD |
|
/CBL |
||
|
|
|
B |
|||||
INPUT |
|
|
|
|
|
|||
OUTPUT |
CD |
2 |
|
|
D-TV |
|
MONITOR |
|
CD player |
C |
|
IN |
|
|
|
OUT |
|
|
|
(PLAY) |
|
|
/CBL |
|
|
|
|
|
COAXIAL |
MD |
|
|
|
|
|
|
|
/CD-R |
|
|
|
|
|
|
|
L |
|
|
|
|
|
|
|
|
OPTICAL |
OUT |
|
|
IN |
|
TUNER |
|
|
|
|
(REC) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AUDIO |
R |
|
|
|
|
VCR |
|
|
OUTPUT |
|
DVD |
1 MAIN |
|
|
OUT |
|
AM |
|
|
|
|
|
|
|
|
ANT |
CD recorder or |
|
|
SURROUND |
|
|
|
|
GND |
MD recorder |
|
|
|
|
|
|
VIDEO |
|
75Ω UNBAL.
|
L |
|
|
|
FM |
|
|
SUB |
SUB |
MONITOR |
ANT |
AUDIO |
R |
WOOFER CENTER |
WOOFER |
OUT |
|
6CH INPUT |
OUTPUT |
|
|
||
INPUT |
|
|
|
|
|
indicates signal direction
L indicates left analog cables
R indicates right analog cables
C indicates coaxial cables
12
CONNECTIONS
Connecting the antennas
Both AM and FM indoor antennas are included with this unit. In general, these antennas should provide sufficient signal strength.
Connect each antenna correctly to the designated terminals.
AM loop antenna |
Indoor FM |
(included) |
antenna |
|
(included) |
TUNER
AM
ANT
GND
75Ω UNBAL.
FM
ANT
Ground (GND terminal)
For maximum safety and minimum interference, connect the antenna GND terminal to a good earth ground. A good earth ground is a metal stake driven into moist earth.
|
75-ohm/300-ohm antenna adapter (U.K. model only) |
||
1 |
2 |
|
|
|
11 |
(7/16) |
|
|
8 |
(5/16) |
Unit: |
|
6 |
(1/14) |
mm (inch) |
Open the cover of the included 75-ohm/300-ohm antenna adapter.
3
Lead wire
Cut the external sleeve of the 75-ohm coaxial cable and prepare it for connection.
Cut the lead wire and remove it.
4 |
|
5 |
Clamp |
Clamp with |
|
with |
pliers. |
|
pliers. |
|
|
|
Insert the wire |
Snap the cover into |
|
into the slot. |
place. |
Insert the cable wire into the |
|
|
slot, and clamp it with pliers. |
|
■ Connecting the AM loop antenna
1 Set up the AM loop antenna, then connect it to the terminals on this unit.
2 Press and hold the tab to insert the AM loop antenna lead wires into the AM ANT and GND terminals.
3 Orient the AM loop antenna for the best reception.
Notes
•The AM loop antenna should be placed away from this unit.
•The AM loop antenna should always be connected, even if an outdoor AM antenna is connected to this unit.
A properly installed outdoor antenna provides clearer reception than an indoor one. If you experience poor reception quality, an outdoor antenna may improve the quality. Consult the nearest authorized YAMAHA dealer or service center about the outdoor antennas.
FREQUENCY STEP switch (China and General models only)
Because the inter-station frequency
spacing differs in different areas, set the
FREQUENCY STEP switch (located on the rear panel) according to the frequency spacing in your area.
North, Central and South America: 100 kHz/10 kHz
Other areas: 50 kHz/9 kHz
Before setting this switch, disconnect the AC power plug of this unit from the AC outlet.
PREPARATION
English
13
CONNECTIONS
Connecting an external decoder
This unit is equipped with 6 additional input jacks (MAIN left and right, CENTER, SURROUND left and right and SUBWOOFER) for discrete multi-channel input from a component equipped with a multi-channel decoder and 6 channel output jacks such as a DVD/SACD player.
|
VCR |
MAIN |
OUT |
SURROUND
|
|
VIDEO |
SUB |
SUB |
MONITOR |
WOOFER CENTER |
WOOFER |
OUT |
6CH INPUT |
OUTPUT |
|
L |
R |
L R |
CENTER |
SURROUND |
|
SUBWOOFER |
MAIN |
|
DVD/SACD player
Note
•When you select 6CH INPUT as the input source, the unit automatically turns off the digital sound field processor, and you cannot use DSP programs.
14
Connecting the speakers
■ Speakers
This unit has been designed to provide the best soundfield quality with a 6-speaker system, using main left and right speakers, rear left and right speakers, a center speaker, and a rear center speaker. If you use different brands of speakers (with different tonal qualities) in your system, the tone of a moving human voice and other types of sound may not shift smoothly. We recommend that you use speakers from the same manufacturer or speakers with the same tonal quality.
The main speakers are used for the main source sound plus effect sounds. They will probably be the speakers from your present stereo system. The rear speakers are used for effect and surround sounds. The center speaker is for the center sounds (dialog, vocals, etc.). The rear center speaker supplements the rear (left and right) speakers and provides for more realistic front-to-back transitions.
The main speakers should be high-performance models and have enough power-handling capacity to accept the maximum output of your audio system. The other speakers do not have to be equal to the main speakers. For precise sound localization, however, it is ideal to use the models of equivalent performance with the main speakers.
Use of a subwoofer expands your sound field
It is also possible to further expand your system with the addition of a subwoofer. The use of a subwoofer is effective not only for reinforcing bass frequencies from any or all channels, but also for reproducing the LFE (low-frequency effect) channel with high fidelity when playing back Dolby Digital or DTS signals. The YAMAHA Active Servo Processing Subwoofer System is ideal for natural and lively bass reproduction.
CONNECTIONS
■ Speaker placement
Refer to the following diagram when you place the speakers.
Center speaker |
Main speaker (R) |
Rear speaker (R)
Subwoofer
Main
1.8 m (6 feet)
speaker (L)
Rear center speaker
Rear speaker (L)
Main speakers
Place the main left and right speakers an equal distance from the ideal listening position. The distance between each speaker and each side of the video monitor should also be the same.
Center speaker
Align the front face of the center speaker with the front face of your video monitor. Place the speaker as close to the monitor as possible (such as directly over or under the monitor) and centrally between the main speakers.
Rear speakers
Place these speakers behind your listening position, facing slightly inwards, about 1.8 m (6 feet) above the floor.
Rear center speaker
Place the rear center speaker in the center between the rear left and right speakers at the same height from the floor as the rear speakers.
Subwoofer
The position of the subwoofer is not so critical, because low bass sounds are not highly directional. However, it is better to place the subwoofer near the main speakers. Turn it slightly toward the center of the room to reduce wall reflections.
Note
•If you do not use any of effect speakers (rear, center and/or rear center), change the settings of “SOUND 1 SPEAKER SET” items at the set menu to direct signals to other terminals you have connected speakers to.
CAUTION
Use magnetically shielded speakers. If these speakers still create interference with the monitor, place the speakers away from the monitor.
PREPARATION
English
15
CONNECTIONS
■ Connections
Be sure to connect the left channel (L), right channel (R), “+” (red) and “–” (black) in accordance with the markers on this unit, the speakers, and the speaker cables. If the connections are faulty, no sound will be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be unnatural and lack bass.
CAUTION
•Use speakers with the specified impedance shown on the rear panel of this unit.
•Do not let the bare speaker wires touch each other or any metal part of this unit. This could damage this unit and/ or the speakers.
10 mm (3/8”)
|
|
|
|
|
1 |
|
|
2 |
|
4 |
Red: positive (+) |
3 |
|
|
Black: negative (–) |
|
5
Banana plug
(With the exception of U.K. and Europe models)
A speaker cord is actually a pair of insulated cables running side by side. One cable is colored or shaped differently, perhaps with a stripe, groove or ridge.
1 Remove approximately 10 mm (3/8”) of insulation from each of the speaker cables.
2 Twist the exposed wires of the cable together to prevent short circuits.
3 Unscrew the knob.
4 Insert one bare wire into the hole in the side of each terminal.
5 Tighten the knob to secure the wire.
y
(With the exception of U.K. and Europe models)
•You can also use banana plug connectors. First, tighten the knob and then insert the banana plug connector into the end of the corresponding terminal.
■ IMPEDANCE SELECTOR switch
WARNING
Do not change setting of the IMPEDANCE SELECTOR switch when the unit power is switched on, as doing so may damage the unit. If this unit fails to turn on when STANDBY/ON (or SYSTEM POWER) is pressed, the IMPEDANCE SELECTOR switch may not be fully slid to either position. If this is the case, slide the switch all the way to either position when this unit is in standby mode. Be sure to move this switch only when this unit is in standby mode.
Select the switch position (left or right) according to the impedance of the speakers in your system.
|
|
(General model) |
Switch |
Speaker |
Impedance level |
|
|
|
|
|
|||
|
|
|
|
position |
|
|
|
|
|
|
|
Main |
If you use one/two set(s) of main speakers, the impedance of |
|
|
|
|
Left |
|
each speaker must be 4 Ω/8 Ω or higher. |
|
|
|
|
Center, |
The impedance of each speaker must be 6 Ω or higher. |
|
|
|
|
|
|
||
|
|
|
|
|
Rear Center, |
|
|
|
|
|
|
Rear |
|
|
SET BEFORE POWER ON |
|
Main* |
If you use one/two set(s) of main speakers, the impedance of |
||
|
IMPEDANCE SELECTOR |
|
|
each speaker must be 8 Ω/16 Ω or higher. |
||
|
A+B : 8ΩMIN. /SPEAKER |
|
A+B : 16ΩMIN. /SPEAKER |
|
|
|
MAIN A OR B : 4ΩMIN. /SPEAKER |
MAIN A OR B : 8ΩMIN. /SPEAKER |
|
|
|
||
CENTER |
: 6ΩMIN. /SPEAKER |
CENTER |
: 8ΩMIN. /SPEAKER |
Right |
|
|
REAR CENTER: 6ΩMIN. /SPEAKER |
REAR CENTER: 8ΩMIN. /SPEAKER |
|
|
|||
REAR |
: 6ΩMIN. /SPEAKER |
REAR |
: 8ΩMIN. /SPEAKER |
|
|
|
|
|
|
|
|
Center, |
The impedance of each speaker must be 8 Ω or higher. |
|
|
|
|
|
Rear Center, |
|
|
|
|
|
|
Rear |
|
|
* [Canada model only] |
IMPEDANCE SELECTOR |
When the switch is set to right, you cannot use “A+B”. |
switch |
|
16
CONNECTIONS
Main A speaker |
Rear speaker |
||
Right |
Left |
Right |
Left |
1 |
|
|
|
|
|
|
2 |
3 |
|
|
|
|
|
|
4 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
COMPORNENT VIDEO
PR PB Y
|
|
|
|
|
|
|
DVD |
|
|
|
AUDIO |
|
AUDIO |
VIDEO |
A |
|
|
|
|
|
|||
|
|
R |
L |
R |
L |
VIDEO |
|
|
|
|
|
|
|
|
D-TV |
|
|
CD |
|
|
DVD |
|
/CBL |
DIGITAL |
|
|
|
B |
|||
INPUT |
|
|
|
|
|
|
|
CD |
2 |
|
|
|
|
|
MONITOR |
|
|
IN |
|
|
D-TV |
|
OUT |
|
|
|
|
|
|
||
|
|
(PLAY) |
|
|
/CBL |
|
|
COAXIAL |
|
MD |
|
|
|
|
|
|
/CD-R |
|
|
|
|
|
|
OPTICAL |
|
OUT |
|
|
IN |
|
TUNER |
|
|
(REC) |
|
|
|
|
|
|
|
VCR |
|
R |
MAIN |
L |
SPEAKERS |
REAR |
|
|
|
|
|
|
R |
L |
||||
DVD |
1 MAIN |
|
OUT |
|
AM |
|
|
|
(SURROUND) |
|
|
|
|
|
|
ANT |
|
|
|
|
|
|
SURROUND |
|
|
|
GND |
|
|
|
|
|
|
|
|
|
|
A |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
VIDEO |
|
|
|
|
|
|
|
|
|
|
|
75Ω UNBAL. |
B |
|
|
|
|
|
|
|
|
|
FM |
|
|
|
|
|
|
SUB |
|
SUB |
MONITOR |
ANT |
|
|
|
|
|
|
WOOFER |
CENTER |
WOOFER |
OUT |
|
|
|
|
|
|
|
6CH INPUT |
OUTPUT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CENTER |
|
REAR |
|
|
|
|
|
|
|
|
|
|
CENTER |
|
|
|
|
|
|
|
|
IMPEDANCE SELECTOR |
|
|
||||||||||||
|
|
|
|
|
|
|
|
SET BEFORE POWER ON |
|
|
|
|||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MAIN A OR B : |
4ΩMIN. /SPEAKER |
MAIN A OR B : |
8ΩMIN. /SPEAKER |
|
|
|||||||||||||||||
CENTER |
A+B : |
8ΩMIN. /SPEAKER |
CENTER |
A+B : 16ΩMIN. /SPEAKER |
|
|
||||||||||||||||
: |
6ΩMIN. /SPEAKER |
: |
8ΩMIN. /SPEAKER |
|
|
|||||||||||||||||
REAR CENTER: |
6ΩMIN. /SPEAKER |
REAR CENTER: |
8ΩMIN. /SPEAKER |
|
|
|||||||||||||||||
REAR |
: |
6ΩMIN. /SPEAKER |
REAR |
: |
8ΩMIN. /SPEAKER |
|
|
|||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PREPARATION
|
|
|
|
6 |
5 |
|
|
Center |
7 |
|
|
|
|
|
Subwoofer |
Right |
Left |
speaker |
Rear center |
system |
Main B speaker |
|
speaker |
MAIN SPEAKERS terminals
You can connect up to two speaker systems to these terminals. When using only one speaker system, connect it to either of the MAIN A or the MAIN B terminals.
REAR SPEAKERS terminals
A rear speaker system can be connected to these terminals.
CENTER SPEAKER terminals
A center speaker can be connected to these terminals.
REAR CENTER SPEAKER terminals
A rear center speaker can be connected to these terminals.
SUBWOOFER jack
61
5
2
3
7
4
The diagram shows the speaker layout in the listening room.
When using a subwoofer with built-in amplifier, including the YAMAHA Active Servo Processing Subwoofer System, connect the input jack of the subwoofer system to this jack. This unit will direct low bass signals distributed from the main, center and/or rear channels to this jack in accordance with your SPEAKER SET selections. The LFE (lowfrequency effect) signals generated when Dolby Digital or DTS is decoded are also directed to this jack in accordance with your SPEAKER SET selections.
Notes
• The cut-off frequency of the SUBWOOFER jack is 90 Hz. |
|
|
• If you do not use a subwoofer, allocate the signals to the main left and right speakers by changing the setting of “SOUND 1 |
|
|
SPEAKER SET” item “1E BASS” on the set menu to MAIN. |
|
|
• Use the control on the subwoofer to adjust its volume level. You can also adjust the volume level by using this unit’s remote control |
English |
|
(see “SETTING THE SPEAKER LEVELS” on page 49). |
||
|
17