Yamaha DM1000V22ADD User Manual

DM1000 V2.2 Supplementary Manual

The DM1000 System Software Version 2.20 features the following changes and additions (including the changes made up to Version 2.05).

Changes and additions in Version 2.20

❏ More Add-On Effects Packages available (pages 161 and 180)

The following Add-On Effects Packages are now available:

• AE041 Surround Post Package

• AE051 Vintage Stomp Package

Due to this addition, effect memories #53 through 67 in the Effects library are now designated as preset effects programs. These preset programs are dedicated to Add-On Effects. The numbers of effects programs that do not have Add-On Effects installed are grayed out and cannot be used. The following effects programs in the Effects library have been dedicated to the new Add-On Effects Packages.

No. Preset name Type

62 Room ER ROOM ER

63 Auto Doppler AUTO DOPPLER

64 Field Rotation FLD ROTATION

65 Max100 MAX100

66 Vintage Phaser VNTG PHASER

67 Dual Phaser DUAL PHASER

Please refer to the following Yamaha website for the latest information on the Add-On Effects Packages:

http://www.yamahaproaudio.com

❏ Additional trigger sources in the GPI OUTPUT section (pages 279 and 305)

The following parameters have been added as the trigger signal source in the GPI OUTPUT section.

xxx ON TALLY: The trigger signal is active only while the corresponding channel is turned ON.

The following parameters have been added in the OUTPUT list of the “GPI Trigger Source & Target List” on page 305.

# Source

222 CH1 ON TALLY

269 CH48 ON TALLY

270 BUS1 ON TALLY

277 BUS8 ON TALLY

278 AUX1 ON TALLY

285 AUX8 ON TALLY

286 ST ON TALLY

❏ About the DM1000 Editor version

If you use the DM1000 Editor (Studio Manager) to control the DM1000, update the DM1000 Editor to version

2.1.2 or higher (Studio Manager version 2.1 or higher).

If your Studio Manager CD-ROM version is not X5834B0, download the latest version from the following Yamaha website:

http://www.yamahaproaudio.com