Loading paper (Trays 1-4)
3. Loading Paper
1.
Lift the handle and pull out the paper tray.
2. Select the appropriate paper stock for your
print job.
3. Open the ream of paper seam side up and
place it in the tray.
DocuColor 7000AP/8000AP User Guide
3-1
3. Loading Paper
N
4. Place the paper in the front right corner of the
tray.
5. Do Not exceed the “Max” fill line.
6. Squeeze the green levers, and slide the
Paper Guides until they touch the side of the
paper.
7. Press the button to select Non-Standard or
Standard at the front of the tray. The green
light will indicate your selection.
Non-standard size paper is any paper for
which there is no paper guide setting within
the minimum and maximum sizes for the
trays: 7.16 to 12.6 inch Long Edge Feed
(LEF) or 7.16 to 19.2 inch SEF (182 - 320 mm
LEF or 182 x 488 mm Short Edge Feed (SEF)
on-standard
3-2
Standard
DocuColor 7000AP/8000AP User Guide
Transparency
3. Loading Paper
8. Press the button to select Transparency or
the appropriate paper weight. The green light
will indicate your selection.
9. Press the button to select Coated or
Uncoated. The green light will indicate your
selection.
Coated
Uncoated
Paper Tray Guidelines
For best results, remember the following:
• Do not store reams of paper in any of the trays.
10. Select the position of the Paper Tray Blowers
to match the weight of the paper stock in the
tray.
11. Slide the tray back into the machine until it
locks into place.
• Do not use wrinkled, torn, curled, or folded paper.
• Do not mix sizes or weights of paper in a paper tray.
DocuColor 7000AP/8000AP User Guide
3-3
3. Loading Paper
3-4
DocuColor 7000AP/8000AP User Guide
Loading...