Xerox DocuColor 5750, DocuColor 5799 Supplementary Manual
Fiery Si v1.2
MajestiK/ Regal/ Empress/ Countess
Terms and product names used in this document may be trademarks or registered trademarks of their respective companies and are hereby acknowledged. Launch Version 9/16/97
Expectation Setting Document for the
Fiery Si v1.2
FIERY Si DRIVER SUMMARY
FIERY Si DRIVER SUMMARY
• Adobe v4.1 for Windows 95.
• Adobe v3.0.1 for Windows 3.x (support for install on a local
client only).
• Adobe v8.3.x for Macintosh.
• There is no driver support for UNIX.
• WIN NT 3.5 does not support PS Level 2 from Fiery Si
Server Driver.
• Adobe PPD’s supplied may not fully enable all features with
Win NT 4.0. XJ+ Server support for Win NT 4.0 is for the
beta level at this time. Not all XJ+ Server features are
supported in Win NT 4.0 since Win NT 4.0 does not support
an Adobe Driver.
• There is no driver support for DOS Applications.
• Support for the Adobe Driver and function in a networked
Windows environment is the responsibility of the customer.
The supplied driver has been validated to support Windows
on a local client only. Contact Adobe for driver support in a
network Windows environment.
• Mac OS 8.x is not validated for printing with the v1.2 Sytem
Software.
• Job notes are not supported when printing with LPR.
NETWORK SPECIFICATIONS
NETWORK SPECIFICATIONS
• The Fiery Si supports a 10BaseT (RJ 45),10Base5
(Thicknet), or 10Base2(Thinnet) via a transceiver, network
connections.
• The Fiery Si auto senses the following protocols:
AppleTalk, TCP/ IP, & IPX, as well as the Centronics
Parallel Port.
• Frame types supported:
-IPX (Ethernet 802.2, Ethernet 802.3 and Ethernet_II)
-AppleTalk (Ethernet_snap)
-TCP / IP (Ethernet _II)
• Four simultaneous network connections are available in
the Fiery Si compared to eight in the XJ / XJ+ Family.
• Token Ring is supported as an option using the same IPX
Token Ring kit as the XJ / XJ+ Family.
• The Token Ring option only supports Novell IPX.
• Native Novell 4.x is not supported at this time. The Fiery Si
connection is through the Bindery Emulation Mode.
• Win NT for non-Intel based platforms is not supported at
this time.
• Novell 4.x AppleTalk connection to the Si is not supported.
• All NT Support is through TCP/IP only.
• Win NT printing is through TCP/IP.
• Win 95 printing is through IPX.
• Win 3.x printing is through IPX
• Macintosh printing is through AppleTalk.
Fiery Si v1.2
MajestiK/ Regal/ Empress/ Countess
Terms and product names used in this document may be trademarks or registered trademarks of their respective companies and are hereby acknowledged. Launch Version 9/16/97
Expectation Setting Document for the
Fiery Si v1.2
PRINTING
PRINTING
STARR Compression
• STARR Compression allows page data to fit into a fraction
of the memory required by the file’s uncompressed size.
For many types of pages, this can be done with no
compromise in image quality (lossless). For complex jobs
or pages with large bitmap files, STARR compression will
manipulate image data to fit the file into the available
memory, and the resulting print may show signs of the
compression (lossy).
• While printing, the Regal, MajestiK, and DocuColor 5799
copier/printer interfaces do not support auto tray switching
with the sorter.
• Enabling auto tray switching in the DocuColor 5799 while
printing, may produce unexpected results.
Print Speed / System Performance
• The maximum print speed for the Fiery Si / Xerox Digital
Color Copier system is limited by the print speed of the
Xerox Digital Color Copier.
• Depending on the complexity of the file, continuous printing
and RIP-WHILE-PRINT may be achieved.
• Overall system performance (‘Click to Clunk’ time) is
primarily dependent upon the software applications and
network environment being used. Rasterizing (RIP-ing) is
only a small fraction of Click to Clunk time.
• Printing with custom software applications may produce
unexpected or unknown results.
SUPPORTED PAPER SIZES
SUPPORTED PAPER SIZES
• The following are the only paper sizes supported by Fiery
Si. Refer to the Customer Documentation for details
regarding the use of each size.
- Letter and SEF Letter
- Legal and Legal 13
- 9 x 12
- SEF A4
- 11 x 17
- A3
- LEF A4
- 8 x 10
- 12 x 18 (DocuColor 5750 Only)
- 9 x 11 (DocuColor 5750 Only)
- 4 x 6 (DocuColor 5750 Only)
- A6 / Postcard (DocuColor 5750 Only)
- B4 (DocuColor 5750 Only and Bypass Tray only for the
DocuColor 5799)
- B5 (DocuColor 5750 Only and Bypass Tray only for the
DocuColor 5799)
- Transparencies 8.5 x 11 and A4 only for MajestiK,
Regal, and DocuColor 5750.
- DocuPac (Bypass Tray only for the DocuColor 5799)
- Oversized Transparencies (DocuColor 5799 Only)
Fiery Si v1.2
MajestiK/ Regal/ Empress/ Countess
Terms and product names used in this document may be trademarks or registered trademarks of their respective companies and are hereby acknowledged. Launch Version 9/16/97
Expectation Setting Document for the
Fiery Si v1.2
UTILITIES
UTILITIES
• The utilities provided with the system are Fiery Downloader,
Fiery Print Calibrator, Fiery Spooler, and Fiery Scan.
• The Export Utility is not supported.
• All utilities on Mac require AppleTalk.
• PC Client utilities use IPX for Win ‘95 / Win 3.11
and TCP / IP for Win NT 3.5.
• There are no utilities supported for UNIX.
• The Command WorkStation is not a purchasable option
available with the Fiery Si.
SUPPORTED MEDIA TYPES
SUPPORTED MEDIA TYPES
• Refer to the Material Usage Guide (MUG) and associated
Customer Documentation for the specific Digital Color Copier
used for specific details regarding the use of each media
type.
• Transparencies
• Interleave
• Thick Paper
• Single Step Transfer Material (DocuColor 5750 Only)
• Labels (DocuColor 5750 Only)
• Thick Paper 2 (DocuColor 5750 Only)
MAXIMUM IMAGE SIZES
MAXIMUM IMAGE SIZES
• The maximum image size from an application may
not match the maximum image size produced by the Xerox
Digital Color Copier.
• The maximum image size for 12 x 18 on a connected
DocuColor 5750 is 297mm x 448mm.
Loading...