Statement of Volatility
Xerox ColorQube 8570 / 8870
Statement of Volatility
Xerox ColorQube 8570 / 8870
Notice
This document describes the locations, capacities and contents of volatile and non-volatile memory devices within the ColorQube 8570 /
8870.
The context of the information in this document is that normal means of access or data extraction are being attempted in order to
reproduce, read, or extract stored or latent data. This does not include attempts to reproduce, read or extract data or reverse engineer
storage methods by individuals or organizations with advanced skills or through the use of extraordinary resources and measures or
specialty equipment not normally available in the industry or to the public.
The content of this document is provided for information purposes only. Performance of the products referenced herein is exclusively
subject to the applicable Xerox Corporation terms and conditions of sale and/or lease. Nothing stated in this document constitutes the
establishment of any additional agreement or binding obligations between Xerox Corporation and any third party.
Signature Block
This evaluation and summary was completed by:
Signature
Printed Name
Job Title
Job Function
Preparation Date
Daniel Cobb
Application Engineer
New Product Development
September 9, 2010
Signature Block
Signature
Printed Name
Job Title
Job Function
Preparation Date
Copyright 2006, 2008 Xerox Corporation
Copyright protection claimed includes all forms and matters of copyrighted material and information now allowed by statutory or judicial law or hereinafter granted,
including without limitation, material generated from the software programs that are displayed on the screen such as styles, templates, icons, screen displays, looks, etc.
XEROX®, The Document Company® and all Xerox product names and product numbers mentioned in this publication are trademarks of XEROX CORPORATION. All nonXerox brands and product names may be trademarks or registered trademarks of the respective companies, and are hereby acknowledged.
Product appearance, build status and/or specifications are subject to change without notice.
Larry Kovnat
Product Security Manager
Product Security Manager
3
Statement of Volatility
Xerox ColorQube 8570 / 8870
Introduction
The Xerox ColorQube 8570 / 8870 is used to perform the following tasks:
Printing
This document describes the amounts and types of memory contained in the device in an easy to read tabular format. To allow
security issues to be addressed as needed, specific commentary has been included about job data and where Personally
Identifiable Information (PII) can be found in the system.
For larger Xerox systems that may contain multiple media feeders or multiple finishers, tabulated data is shown even though
these devices never contain any job or PII data in electronic form. Also, in larger Xerox systems, another vendor may supply a
Digital Front End (DFE) that is connected to the Xerox Print Engine. In these cases, the vendor of the DFE must provide their own
Statement of Volatility for the hardware which comprises their additions to Xerox products.
The information contained in this document has been verified at the time the product is released for sale. Manufacturing process
changes may require that memory amounts are increased but, the purpose or contents of the memory will not change.
General Memory Information
Volatile Memory
All volatile memory listed is cleared after power is removed (decay occurs generally within 20 seconds at room temperature).
All volatile memory listed is required for normal system operation and during service and diagnostic procedures.
Non-Volatile Memory
All non-volatile memory listed is required for normal system operation and during service and diagnostic procedures.
Removal of any non-volatile memory will void the warranty.
None of the non-volatile memory in the system can be accessed by accidental keystrokes.
4
Drive / Partition
Removable
Size: User Modifiable:
Function:
Process to Sanitize:
Additional Information:
Disk Overwrite capability is immediate, daily or age based
.
Hard Drive Information
The data table below details the hard disk volume and partition information for the Xerox ColorQube 8570 /
8870.
1st Hard Disk / Partition Description
Complete this table if the device has media storage capability
(System, Image):
160 GB (Optional) Y 160 GB Y User/job data Manual or
Y / N
Y / N
Scheduled
5
Type (SRAM, DRAM, etc)
Size User Modifiable
Function or Use
Process to Sanitize
Type (
Flash, EEPROM, etc
) Size User Modifiable
Function or Use
Process to Sanitize
Type (disk drives, tape
Removable
Size: User Modifiable:
Function:
Process to Sanitize:
Additional Information:
Statement of Volatility
Xerox ColorQube 8570 / 8870
System Descriptions
The data tables below detail the information regarding the volatile and non-volatile memory contained in the
ColorQube 8570 / 8870.
Volatile Memory
(Y/N)
SDRAM 512MB N System + User Memory Power off printer
SDRAM (Optional) 512MB N User Memory Power off printer
Non-Volatile Memory
(Y/N)
Flash 32MB N System Firmware None
EEPROM 16KB N System Parameter Storage None
EEPROM 8K N Head Parameter Storage None
EEPROM 32K N System, Network Parameters
and User Settings Storage
Network Parameters and User
Settings can be changed from
the Front Panel or Printer
Web Interface
Media and Storage
Complete this table if the device has media storage capability
drives, CF/SD/XD memory
cards, etc.):
N/A N/A N/A N/A N/A N/A
Y / N
Y / N
The Xerox ColorQube 8570 / 8870 does not contain RFID devices (uses wired toner CRUMs).
RFID Tag location Purpose
N/A N/A
RFID Devices
6
The data table below details the external local access ports available on the Xerox ColorQube 8570 / 8870.
USB
Complete an entry for each USB port
USB port and location Purpose
Printer Device Port Printer connection to computer
Loading...