Xerox AltaLink B8045, AltaLink B8055, AltaLink B8065, AltaLink B8075, AltaLink B8090 Installation Manual

Installing and Uninstalling

®

Windows

7 Xerox Print Drivers

Customer Tip

dc09cc0458

This document applies to
Xerox Print Drivers for the
Windows 7 Operating
System.

Purpose

This document contains the procedure to install and uninstall Xerox Print Drivers in a
Microsoft Windows 7environment.

Prerequisites

The print driver files must be placed in a location accessible from the workstation in
which the print driver will be installed.

Installation Procedure

1. From Windows 7 click on ‘StartÆ Control Panel’.

2. Click on ‘Devices and Printers’. If that selection is not available search for ‘Printers’

in the ‘Search Control Panel’ field.

January 29, 2010

3. Select ‘Add a printer’ and then ‘Add a local printer’.

4. Within the ‘Choose a printer port’ window select ‘Create a new port:’

5. Choose ‘Standard TCP/IP Port’ from the ‘Type of port’ pull-down.

dc09cc0458
Customer Support Page 1

6. Within the ‘Type a printer hostname or IP address’ window enter the ‘Hostname or IP Address’ of the printer

and select [Next].

Note: The ‘Port name’ will mirror the IP address or Hostname. You may change the Port name in this step to

something you can identify easier.

7. In the ‘Install the printer driver’ window select [Have Disk…].

8. Browse to the location where you saved the Print Driver files and select [Open] and then [OK].

9. In the ‘Install the printer driver’ window choose the printer you are installing the driver for and select [Next].

10. Within the ‘Type a printer name’ window you can manually enter a printer name or accept the default

provided. Select [Next] which will start the print driver installation.

dc09cc0458
Customer Support Page 2