Copyright protection claimed includes all forms of matters of copyrightable materials and information now allowed
by statutory or judicial law or hereinafter granted, including without limitation, material generated from the
software programs which are displayed on the screen such as styles, templates, icons, screen displays, looks, etc.
Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the
copyright laws.
The PaperPort® and OmniPage® brand name and logo are registered trademarks of Nuance Communications, Inc.
Adobe®, Adobe® Acrobat®, Adobe® Reader®, and the Adobe® PDF logo are registered trademarks of Adobe
Systems Incorporated in the United States and/or other countries. The Adobe PDF logo will appear in this product’s
software, and full access to Adobe software features is only available if an Adobe product is installed on your
computer.
Microsoft is a U.S. registered trademark of Microsoft Corporation. Windows™ is a trademark and SharePoint® is a
registered trademark of Microsoft Corporation.
All Rights Reserved. All other products mentioned herein may be trademarks of their respective companies.
Information is subject to change without notice and does not represent a commitment on the part of Visioneer. The
software described is furnished under a licensing agreement. The software may be used or copied only in
accordance with the terms of such an agreement. It is against the law to copy the software on any medium except
as specifically allowed in the licensing agreement. No part of this document may be reproduced or transmitted in
any form or by any means, electronic or mechanical, including photocopying, recording, or information storage and
retrieval systems, or translated to another language, for any purpose other than the licensee's personal use and as
specifically allowed in the licensing agreement, without the express written permission of Visioneer.
Restricted Rights Legend
Use, duplication, or disclosure is subject to restrictions as set forth in contract subdivision (c)(1)(ii) of the Rights in
Technical Data and Computer Software Clause 52.227-FAR14. Material scanned by this product may be protected
by governmental laws and other regulations, such as copyright laws. The customer is solely responsible for
complying with all such laws and regulations.
Changes are periodically made to this document. Changes, technical inaccuracies, and typographic errors will be
corrected in subsequent editions.
•Environmental Health and Safety Contacts on page 13
1
Xerox 7600i
User’s Guide
7
Safety Introduction
Notices and Safety
Please read the following instructions carefully before operating the machine and refer to them as needed to ensure
the continued safe operation of your machine.
Your Xerox product and supplies have been designed and tested to meet strict safety requirements. These include
safety agency evaluation and certification, and compliance with electromagnetic regulations and established
environmental standards.
The safety and environment testing and performance of this product have been verified using Xerox materials only.
Warning: Unauthorized alterations, which may include the addition of new functions or connection of external
devices, may impact the product certification. Please contact your Xerox representative for more information.
8
Xerox 7600i
User’s Guide
Operational Safety Information
Your Xerox equipment and supplies have been designed and tested to meet strict safety requirements. These
include safety agency examination, approval, and compliance with established environmental standards.
To ensure the continued safe operation of your Xerox equipment, follow these safety guidelines at all times:
Do These
•Always follow all warnings and instructions that are marked on or supplied with the equipment.
•Before cleaning this product, unplug the product from the USB port. Always use materials specifically
designated for this product, the use of other materials may result in poor performance and create a hazardous
situation. Do not use aerosol cleaners, they may be explosive and flammable under certain conditions.
•Always exercise care when moving or relocating equipment.
•Always locate the machine on a solid support surface that has adequate strength to support the weight of the
machine.
•Always locate the machine in an area that has adequate ventilation and room for servicing.
Do Not Do These
•Never attempt any maintenance function that is not specifically described in this documentation.
•Never remove covers or guards that are fastened with screws. There are no operator serviceable areas within
these covers.
•Never locate the machine near a radiator or any other heat source.
•Never override or “cheat” any of the electrical or mechanical interlock devices.
Xerox 7600i
User’s Guide
9
Emergency Power Off
If any of the following conditions occur, turn off the scanner (if applicable) and disconnect the USB cable from the
scanner and the computer.
Contact an authorized Xerox Service Representative to correct the problem:
•The equipment emits unusual odors or makes unusual noises.
•Liquid is spilled into the machine.
•The machine is exposed to water.
•Any part of the machine is damaged.
10
Xerox 7600i
User’s Guide
Maintenance Information
1.Any operator product maintenance procedures will be described in the user documentation supplied with the
product.
2.Do not carry out any maintenance on this product which is not described in the customer documentation.
3.Do not use aerosol cleaners. The use of cleaners that are not approved may cause poor performance of the
equipment, and could cause a dangerous condition.
4.Use supplies and cleaning materials only as directed in this manual.
5.Do not remove covers or guards that are fastened with screws. There are no parts behind these covers that you
can maintain or service.
6.Do not perform any maintenance procedures unless you have been trained to do them by an authorized local
dealer or unless a procedure is specifically described in the user manuals.
Xerox 7600i
User’s Guide
11
Product Safety Certification
This product is certified by the following Agency using the Safety standards listed:
AgencyStandard
Underwriters Laboratories Inc.UL60950-1 (USA)
CSA 22.2 No. 60950-1 (Canada)
TUVIEC 60950-1
12
Xerox 7600i
User’s Guide
Environmental Health and Safety Contacts
Contact Information
For more information on Environment, Health, and Safety in relation to this Xerox product and supplies, please
contact the following customer help lines:
USA & Canada:1-800-828-6571
Europe:+44 1707 353 434
Xerox 7600i
User’s Guide
13
14
Xerox 7600i
User’s Guide
Welcome
This chapter includes:
•What’s in the Box on page 16
•System Requirements on page 17
•Documentation on page 18
•The Xerox 7600i Scanner on page 19
•Scanner Setup on page 20
Your new Xerox scanner can quickly scan stacks of single-sided or double-sided pages and place their electronic
images on your computer.
2
Xerox 7600
User’s Guide
15
What’s in the Box
Before proceeding, check the contents of the box. If items are missing or damaged, contact the dealer where you
purchased the scanner.
Xerox 7600i ScannerQuick Install GuideTechnical Support Card
Windows™
Installation DiscUSB Cable
16
Xerox 7600
User’s Guide
System Requirements
Pentium 4 PC or AMD equivalent with:
•A DVD-ROM drive
•An available Universal Serial Bus (USB) port
•Microsoft
The scanner is compatible with Service Pack 3 for Windows XP and Service Pack 1 for Windows Vista.
•Minimum of 2 gigabyte (GB) of internal memory (RAM)
•350 MB minimum of free hard disk space
A VGA or SVGA Monitor
The recommended settings for your monitor are:
•Color quality of 16-bit or 32-bit
•Resolution set to at least 800 x 600 pixels
Refer to your Windows documentation for instructions on setting the color quality and resolution for the monitor.
®
Windows® operating system: Windows XP (Service Pack 1 and 2), Windows Vista, or Windows 7
Xerox 7600
User’s Guide
17
Documentation
The following documentation is provided with your scanner:
•Scanner User’s Guide—On the Installation Disc; contains detailed installation, scanning, configuration, and
maintenance information.
•Nuance PaperPort User’s Guide—On the Installation Disc; contains detailed feature and configuration
information for the PaperPort software.
•Nuance OmniPage User’s Guide—On the Installation Disc; contains detailed feature and configuration
information for the OmniPage software.
18
Xerox 7600
User’s Guide
The Xerox 7600i Scanner
3
Flatbed GlassControl PanelDocument PadUSB Port
412
1
2
3
4
Document Pad—Holds documents in place on the scanner glass.
Flatbed Glass—Place document face down to scan.
Control panel—One Touch scanning controls.
Universal Serial Bus (USB) port—Connects the scanner to the computer.
Xerox 7600
User’s Guide
19
Scanner Setup
1.Remove the scanner from its protective foam and plastic bag.
2.Remove the foam strip from the inside of the scanner.
3.Close the cover when you are done.
20
Xerox 7600
User’s Guide
Installation
This chapter includes:
•Before You Begin on page 22
•Install the Software and Connect the Scanner on page 23
•Register Your Scanner on page 29
•Installing Additional Applications on page 30
•View the User Guides on page 31
3
Xerox 7600i
User’s Guide
21
Before You Begin
Please make sure of the following before you begin installation:
•If you are prompted to reboot during installation, please select "No". Finish installing the rest of the software,
then close all open windows and reboot your computer.
•The information in this guide may cover software not provided with the scanner you purchased. Please
disregard any information about the software not applicable to your scanner. Visit our web site at
www.xeroxscanners.com for the latest software updates for your Xerox scanner.
•If your computer has AntiVirus or AntiSpyware software running, you may encounter alerts or messages during
installation asking you to allow the installation to proceed. Although the messages will differ based on the
software your computer is running, in each case you should allow the installation to proceed if that option is
available. Alternatively, you can turn off the AntiVirus or AntiSpyware software before installing your scanner,
but if you do, make sure to turn it back on again when installation is finished.
•If you already have a scanner connected to your computer, it is recommended that you remove that scanner’s
driver program prior to installing your Xerox scanner. You can remove these programs from the Windows
Control Panel. Please refer to the user manual provided with your other scanner hardware for instructions
about removing the driver and software for that unit.
•If your computer is running Windows Vista or Windows 7, you may see the Windows User Account Control
screen asking you to confirm system changes. Click the Yes button to allow the installation to proceed.
22
Xerox 7600i
User’s Guide
Install the Software and Connect the Scanner
The installation disc contains the necessary driver, and scanning software, to use your Xerox scanner.
To install the software:
1.Start Microsoft Windows and make sure that no other applications are running.
2.Insert the installation disc into your computer’s DVD-ROM drive.
The disc automatically starts.
3.The Select Language window opens. Click the drop-down menu arrow and select the language to use. Click OK.
4.The disc’s Main nenu window opens.
Note: If the disc does not start, check the following:
•Make sure the disc drive’s door is completely shut.
•Make sure the disc was inserted in the drive in the proper direction (label side up).
To l a u nc h t h e d is c m a nu al ly :
•Open the Windows options for your computer’s disc drives.
•Double-click the icon for your DVD-ROM drive.
•The Installation menu for the disc should now open.
If the menu does not open:
•From the list of files on the disc, double-click the file named setup.exe.
Xerox 7600i
User’s Guide
23
5.On the Main menu, select Install products.
6.Make sure the boxes for Scanner Driver and Visioneer One Touch are selected, as well as any other
applications you want to install.
Note: The software provided with your scanner may differ slightly from the list shown in the window.
7.Click Install now.
24
Xerox 7600i
User’s Guide
Installing the Scanner Driver
The scanner driver installation will start first.
1.The Welcome to the Xerox Setup Wizard opens.
2.Click Next.
3.On the Xerox License Agreement window, read the license agreement. If you accept the terms, select I Agree
then click Next.
If you choose not to accept the license agreement, click Cancel. Click Close on the Installation Interrupted
window.
4.The software will now be installed.
5.Stop when you see the “Complete the installation by connecting your hardware” window. Do not click OK yet.
Leave the window open and proceed to the next section.
Note: If you do not see this on-screen diagram for connecting the scanner, stop and follow the instructions below.
Xerox 7600i
User’s Guide
25
Connect the USB Cable
The scanner does not have an external power supply. It draws its power directly from the computer through the USB
cable. If you use a USB hub with your computer, the hub must have its own power supply. The scanner does not
have an on/off switch. The scanner is ready to scan as soon as its software is finished loading onto your computer.
1.Remove any tape from the USB cable.
2.Plug the USB cable into the USB port on the scanner then into a USB port on the computer.
If the plug does not attach easily, make sure that you are plugging it in correctly. Do not force the plug into
either connection.
Your computer recognizes that a scanner has been plugged into the USB port and automatically loads the
appropriate software to run the scanner. If your computer is running Windows version XP or later, you will see a
message similar to the one below.
26
Xerox 7600i
User’s Guide
3.When you’re certain that the software has completely loaded, return to the “Complete the installation by
connecting your hardware” window.
4.Click OK to complete the installation process.
5.Click Close on the Installation Complete window to close and exit the driver installer.
Xerox 7600i
User’s Guide
27
Installing Visioneer One Touch
The Visioneer One Touch software installation will start automatically after you click Close on the driver Installation
Complete window. One Touch is the software needed for the buttons on the scanner to work.
1.Click Next on the Welcome to the One Touch Setup Wizard.
2.On the Visioneer License Agreement window, read the license agreement. If you accept the terms, select I Agree then click Next.
If you choose not to accept the license agreement, the installation will terminate and One Touch will not be
installed.
3.Click Close on the Installation Complete window to close and exit the software installer.
If you selected other software to install from the DVD the installation for that software will automatically start after
you click Close on the Installation Complete window. Follow the instructions on-screen to install each application
you selected.
28
Xerox 7600i
User’s Guide
Register Your Scanner
Registering your scanner is important as it provides you with access to our free telephone support service.
Registration also gives you free access to software updates for your scanner.
To register your scanner:
You will need an active internet connection to register your scanner. If you do not have internet access you can
contact our customer service department to register the scanner. Please refer to the Technical Support Card, that
you received with the scanner, for our customer service contact information.
1.Open an Internet Explorer window, or any other internet browser you have installed on your computer.
2.In the web address field type www.xeroxscanners.com.
3.Press Enter on your computer’s keyboard or click the option on screen to go to the web address.
4.When the Xerox scanners web page loads click on Register Your Product.
5.Fill in the registration form, all required fields have an asterisk (*).
Note: A valid email address is required for registration.
6.You will be asked to enter the serial number for the scanner, it is located on the back or underside of the
scanner.
7.After filling in the form, click on Submit Your Registration to complete the registration.
Xerox 7600i
User’s Guide
29
Installing Additional Applications
Your scanner includes free, additional applications as described in the table below.
1.Return to the disc’s Main menu and click Install products.
2.Select the additional applications you want to install, then click Install now.
3.Follow the instructions on the screen to install each of the additional applications.
SoftwareAbout the Software
Adobe® Reader®Adobe Reader is a stand-alone application that you use to open, view, search, and
print PDF files. This application is located on the disc in the User Guides section.
Nuance PaperPort®PaperPort is a document management software application. The PaperPort scanning
features allow you to insert new pages into an existing file and name your file
immediately after scanning. From within the PaperPort desktop you can sort your
documents and move them between folders as you would through the Windows My
Documents folder. You can reorder the pages in a PDF file, and unstack a document so
all the pages are resaved as individual files. PaperPort also has some basic image
editing options in the PaperPort PageView, such as; adding notes to image files,
modifying image colors, and touch up the image using the erase and/or auto-correct
options.
Nuance OmniPage® OmniPage Pro provides precision OCR analysis, advanced layout detection, and
Logical Form Recognition™ (LFR) technology. Advanced security features quickly turn
office documents and forms into over 30 different PC applications for editing,
searching and sharing. Custom workflows handle large volumes of documents, and
you can use its tools to print to PDF.
30
Xerox 7600i
User’s Guide
Loading...
+ 152 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.