Whirlpool WFW5620HW Quick Guide

0 (0)
Whirlpool WFW5620HW Quick Guide

Quick Reference Guide

Using Your Front-Loading Washer

NOTE: See your Use and Care Guide for more information. Not all settings and options are available on each cycle.

Fire Hazard

Never place items in the washer that are dampened with gasoline or other flammable fluids.

No washer can completely remove oil.

Do not dry anything that has ever had any type of oil on it (including cooking oils).

Doing so can result in death, explosion, or fire.

What to

Wash

1 TOUCH POWER TO TURN ON WASHER

BEFORE FIRST USE:

2 RUN WASH CYCLE WITHOUT LAUNDRY

Before washing clothes for the first time, choose the Quick cycle and run it without clothes. This initial cycle serves to ensure the interior is clean before washing clothes.

DOING LAUNDRY:

3 ADD LAUNDRY PRODUCTS, IF DESIRED

Single-dose laundry packets, Oxi-type boosters, color-safe bleach, or scented crystals can be added to the drum prior to adding laundry.

5 ADD HE DETERGENT, IF DESIRED

If you choose to use the Single Load Dispenser, add detergent to the appropriate compartment at this time.

6 ADD LIQUID FABRIC SOFTENER AND CHLORINE BLEACH TO SINGLE LOAD DISPENSER,

IF DESIRED

7 SELECT A CYCLE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Power

 

 

 

 

Start

How to

 

 

Button

 

 

Button

 

 

 

 

 

 

 

 

 

 

Wash

 

 

 

 

 

 

 

Cycle Status

 

 

 

Cycle

 

 

 

Display

 

 

 

 

 

 

 

 

 

Modifiers

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4 LOAD LAUNDRY

Place a load of sorted items loosely in the washer.

IMPORTANT: Push load fully into the washer. Make sure no items are resting on the

rubber seal to avoid trapping them between the seal and the door window.

8 ADJUST CYCLE MODIFIERS, IF DESIRED

9 SELECT ANY ADDITIONAL OPTIONS

Hold 3 sec for

Control Lock

Additional options available:

Cycle Signal

Extra Rinse

Pre-Soak

10 TOUCH AND HOLD START TO BEGIN WASH CYCLE

Touch and hold START for 3 seconds to start the wash cycle. To add 1-2 additional garments, pause the cycle by Touching START once to add garments; then touch and hold START again to continue the cycle. To cancel a cycle, touch and hold POWER.

MAINTENANCE

Run Clean Washer cycle every 30 loads. The washer will also give you a reminder.

Leave door open for ventilation when machine is not in use.

Check door seal between cycles. Clean out small items and/or debris if present.

Hold 3 sec for

Control Lock

 

 

 

 

 

 

W11219947A

Options

 

®/TM ©2018 Whirlpool. All rights reserved.

 

W11219997A - SP

Used under license in Canada.

08/18

Loading...
+ 1 hidden pages