Whirlpool AWO 8147, AWO 8167 INSTRUCTION FOR USE

30106203GB.fm Page 1 Monday, June 16, 2008 7:19 PM

GB PROGRAMME CHART

A. “Door open” indication This washing machine is equipped with

automatic safety functions which detect and diagnose faults at an early stage and react appropriately, e.g.:

B. “Service” indication C. “Water tap closed” indication D. “Clean pump” indication

C D

}

A B

J L

E. Programme selector F. “Start (Pause)” button G. “Spin” button H. Programme sequence indicator

I. “Reset” button J. “Start delay” button K. “Temperature” button L. Display

Programme

White Cotton Kochwäsche

Colours Buntwäsche

Synthetics Pflegeleicht

Daily load Mischwäsche

Quick wash

Delicates Feinwäsche

Wool Wolle

Handwash

Rinse & Spin Spülen & Schleudern

Spin Schleudern

Gentle Spin Schonschleudern

Drain Abpumpen

optional / Yes : dosing required

❉

For improved garment care, spin speed is restricted in these programmes.

Tempe-

rature

70 - 95 °C

20 - 60 °C

20 - 30 °C

20 - 40 °C

—— —— —— ———

Care

Labels

Max

Load

- Respect the manufacturer’s recommendations on the care

label

7.0

Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.

With heavily soiled laundry the additional “Prewash” option

7.0

can be selected as well.

Normally soiled blouses, shirts, overalls etc. made of

3.0

polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or blends with cotton.

Slightly to normally soiled textiles made of cotton and/or

4.0

synthetics.

Shortly worn outer clothing made of cotton, polyester,

4.0

polyamide and blends with cotton. Curtains and delicate clothing, dresses skirts, shirts and

1.5

blouses. Only woollens, labelled with the Woolmark and identified

1.0

as machine washable. Textiles made of linen, silk, wool and viscose marked as

1.0

“handwashable”.

Same as the last rinse and the final spin in the “Cotton”

7.0

programme. In this programme spinning is intensive. Same as the spin cycle

7.0

in the “Cotton” programme. In this programme spinning is gentle. Same as the spin cycle in

1.0

the “Wool” programme. Drain only - no spinning. Alternative method of terminating

programme after “Rinse Hold”.

Type of wash/Notes

Detergents and additives Special options

Pre-

Main

wash

❉

—

❉

—

——

Softener Pre-

wash

Yes

❉❉❉❉❉❉❉❉

❉

wash

Vor-

wäsche

——

—

❉❉

——

—— —— — —— —— — —— —— — ——

vorwahl

Easy

Start

delay

Start-

Intensive

ironing

Leicht

bügeln

❉❉ ❉ ❉❉

——

❉

——

❉

——

❉

—

❉

———

❉

———

❉

—————

❉

Whirlpool is a registered trademark of Whirlpool USA

Rinse

rinse

Intensiv

spülen

hold

Spül-

stopp

Spin

Schleu-

dern

❉❉

❉❉❉

❉ ❉

5019 301 06203

Max Spin

Speed

rpm

max.

1000

400

max.

1000

Black process 45.0° 100.0 LPI

30106203GB.fm Page 2 Monday, June 16, 2008 7:19 PM

CONSUMPTION DATA

Programme

White Cotton 95 7.0 74

Colours

***

Colours 40 7.0 69 0.75 2:05 Synthetics 60 3.0 46 Synthetics 40 3.0 42 0.40 1:20 Daily load 40 4.0 48 0.50 1:00

Quick wash 30 4.0 48 0.25 0:30

Delicates 30 1.5 60 0.50 0:45

Wool 40 1.0 60 0.55 0:45

Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

* **

***

Handwash 40 1.0 45 0.55 0:40

The time indicated on the display can deviate from the values in the table, because it takes into account the household conditions applicable at that time. To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out. Reference Programme for Energy Label.

Temp e r ature

(°C)

60 7.0 54 1.19 2:20

ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME

Add detergent as indicated on the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use.

1. Turn the

2. The

3. The indication lamp of the predefined

programme selector

programme. The display shows the programme duration in hours and minutes as well as the predefined temperature. The

temperature

“Temperature” button.

lights up; in case you want to set another spin speed, press the “Spin” button.

“Start (Pause)”

can be altered by pressing the

to the desired

button blinks.

spin speed

SELECT ANY DESIRED OPTION

Push the button of any option desired - the respective indication lights up. When the combination of programme and additional option(s) is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically.

“Clean+” button

• Choose this option if you use an in-wash additive for stain removal (powder, for example “Vanish”) - it will optimize the additive’s efficiency to get better wash performance and stain removal.

• Selectable for programmes “Cotton ” and “Synthetics”; choose temperature of 30 or 40°C and use with maximum load.

• Add an appropriate amount of in-wash additive for stain removal (powder) to the main wash chamber, together with your detergent (only use powder detergent with this option). Respect the manufacturer’s dosing instructions.

Load

Water

(kg)

• Prolongs the programme by approx. 10 to 15 minutes.

• Appropriate for use of stain removers and bleaches on

“Prewash” button

• Only for heavily soiled loads (for example sand,

• Do not use liquid detergent for the main wash when

“Easy ironing” button

• Can be used together with “Cotton”, “Synthetics” and

• Increases the water quantity and the clothes are spun

“Intensive rinse” button

• More water is added and rinse cycle is prolonged.

• This option is particularly suitable for areas with very

“Rinse hold” button

• The laundry remains in the last rinse water without

• This option is particularly recommended for the

• It is particularly useful if you want to postpone spinning

• If you select “Rins e ho ld”, do not le av e the la undry to

Energy

(l)

(kWh)

2.10 2:10

0.80 1:35

oxygen basis.

not be used!

granular dirt) sensible. Increases the cycle time by approximately 15 min.

activating the Prewash option.

“Daily load” programmes to make ironing easier.

very gently.

soft water, washing baby linen and helps people with allergies.

progressing to the final spin cycle to avoid creasing and prevent colours from changing.

programmes “Synthetics”, “Daily load” and “Delicates”.

to a later time, or if you want to drain only.

soak for too long.

The programme stops to “Rinse hold” at the

Note:

time the “Rinse hold” light in the programme sequence indicator is on. The indication lamp next to the

(Pause)”

button blinks.

Approx. Programme Duration

(hours : minutes)

Chlorine or perborate bleaches must

“Start

Terminate the “Rinse hold” option:

• Press the will terminate automatically with the final spin cycle for the present wash programme.

• If you do not wish to spin the clothes, turn the programme selector knob to the “Drain” programme and press the

“Spin” button

• Every programme has a predefined spin speed.

• Press the button to set another spin speed.

• If spin speed “0” is selec ted, the final spinning is cancelled but intermediate spin peaks remain during rinse. The water is drained out only.

“Start (Pause)”

button; the programme

button.

START DELAY

The “Start Delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper. Do not use liquid detergent when activating the “Start Delay”.

• Select programme, temperature and options.

• Press the “Start Delay” button to select the delay time by 1 to 23 hours;

• Press the The indication light next to the “Start Delay” button lights up and the countdown of the delay time begins. The dot between hours and minutes of the indicated delay time as well as the light of the start delay button will keep blinking until the programme starts.

• The time delay indication disappears when the programme starts and it is replaced by the remaining programme time.

• Once having pressed the number of hours preselected can be reduced by pressing and holding the “Start Delay” button. From 1 hour on, the delay time can also be reduced by minutes.

To cancel the “Start Delay” ..before you press the “Start (Pause)” button:

• Turn the programme selector to another position or press the

..after having pressed the “Start (Pause)” button:

• Press the start delay time disappears from the display.

“Start (Pause)”

“Reset”

button.

“Start (Pause)”

button.

button for at least 3 seconds - the

button, the

PROGR AMME START

Open the tap and press the indication lamp next to the up. The programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Spin/Drain. The display shows the remaining programme time. Due to variations in load and temperature of inlet water, the remaining time is newly calculated in certain programme phases. If this is the case,

an animation appears on the display

“Start (Pause)”

button. The

button lights

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the lamp lights to show that the door can be opened. As long as a wash programme is running, the door remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Cancel (Reset) a running programme before the end”.

RED INDICATIONS

“Service”

Lighting up of the “Service” indication can be caused by a fault in an electrical component. Refer to the “Troubleshooting Guide” in your Instructions for Use; if the fault persists, contact our After Sales Service.

“Water tap closed”

The appliance has no or insufficient water supply. Open the water tap; if the indication still lights up, refer to the “Troubleshooting Guide” in the Instructions for Use.

“Clean pump”

Waste water is not pumped out. Check whether the drain hose is kinked or the filter must be cleaned; in the latter case refer to the Instructions for Use (“Removing the Filter”).

PROGRAMME END

• All the lights of the programme sequence indicator are off, and the “Door open” indication lights up.

1. Turn the programme selector to the “Off/O” position.

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START

1. Press the programme. The light blinks.

2. Select the new programme, temperature, any options and another spin speed if you want.

3. Press the programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

“Start (Pause)”

button to pause the

button again. The new

CANCEL (RESET) A RUNNING PROGRAMME BEFORE THE END

The

• Press the

button cancels a programme before the end.

“Reset”

button for at least 3 seconds. Any

“Reset”

existing water is drained out before the door can be opened.

Whirlpool is a registered trademark of Whirlpool USA

5019 301 06203

Black process 45.0° 100.0 LPI

Whirlpool AWO 8147, AWO 8167 INSTRUCTION FOR USE

Specifications and Main Features

Frequently Asked Questions

User Manual