|
AKM 251 |
PRODUCT DESCRIPTION SHEET |
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
IT |
PT |
GR |
MA |
SA |
Operation of burners with electric ignition
To light one of the burners:
•Press the relative knob and turn it anticlockwise to the large flame setting .
•At the same time, press the button with the star .
The spark plug gives out a spark that causes the burner to ignite.
If the burner fails to light, repeat the above steps.
1.Removable panstand grids
2.Medium burner
3.Rapid electric hotplate
4.Large burner
5.Small burner
6. Medium burner control knob
7. Large burner control knob
8. Small burner control knob
9. Hotplate control knob
10. Electric ignition button
11. Hotplate operation lamp
Symbols
Shaded
Tap closed
circle
Large flame
Maximum opening/delivery
Small flame
Minimum opening or reduced delivery
Note:
—Should particular local conditions of the delivered gas make the ignition of the burner difficult, it is advisable to repeat the
operation with the knob turned to the small flame setting .
Operation of the electric hotplate
•Set the knob to one of positions 1-6, which correspond to different temperatures.
•To switch off the hotplate, set the knob to position “0”.
5019 319 61181