West Penn 970BK0500, 970BK1000, 970BL0500, 970BL1000, 970BN0500 Specsheet

Technical Data Sheet

Fire Alarm Cables

	2833 West Chestnut Street
	Washington, PA 15301
	Toll Free: [phone]
	Fax: [phone]
	www.westpenn-wpw.com
PART NUMBER:	970
DESCRIPTION:	18/2 Solid bare copper conductors, unshielded with an overall jacket.
NEC RATING:	FPL, NEC Article 760
APPROVALS:	(UL) Listed
APPLICATION:	Indoor for: Power –Limited Fire Protective Circuits

Construction Parameters:

Conductor	18 AWG Bare Copper
Stranding	Solid
Insulation Material	PVC
Insulation Thickness	0.032” Nom.
Number of Conductors	2
Shield	None
Drain	None
Jacket Material	PVC
Jacket Thickness	0.104''x.204” Nom.
Overall Cable Diameter	'' Nom.
Approximate Cable Weight	20 Lbs/1M' Nom.
Flame Rating	NFPA262 Flame Test

Electrical & Environmental Properties:

Temperature Rating	-10deg C to 60deg C
Operating Voltage	300 V RMS
Max.Capacitance Between Conductors @ 1 KHz	pf/ft Nom.
DC Resistance per Conductor @ 20deg C	6.5Ohms/1M' Nom.
Insulation Colors	Red, Black
Jacket Color	Red
RoHS Compliant	--

Mechanical Properties:

Max. Recommended Pull Tension

Min. Bend Radius (Install)

Specification Issue Date: 7/06

This document is the property of West Penn Wire.

. The information contained herein is considered Proprietary and not to be reproduced by any means Without written consent of West Penn Wire

2.00”

Standard Lengths are 1000ft.

The Jacket is sequentially footmarked.

The information presented here is, to the best of our knowledge, is true and accurate. However, since conditions of use are beyond our control, all recommendations or suggestions are presented without guarantee or responsibility on our part. We disclaim all liability in connection with the use of information contained herein or otherwise.