Welch Allyn Cardio Perfect Workstation Installation Guide

CARDIOPERFECT

WORKSTATION

INSTALLATION GUIDE

™

Windows Vista® - DO THIS FIRST

INSTALLING THE CARDIOPERFECT
WORKSTATION SOFTWARE ON A
SINGLE PC

This guide shows how to install the software for the Welch Allyn
CardioPerfect Workstation on a single laptop or desktop PC. This guide
does not cover installation for networked CardioPerfect configurations,
or for EMR-connected computers. For a detailed installation procedure,
see CardioPerfect Workstation Software Installation Manual, located
on the CD under “Browse the manuals” folder.

System Requirements

You need the following minimum recommended configuration to
work with the CardioPerfect resting ECG, ambulatory blood pressure,
or spirometry software modules.

Computer Tower or desktop PC preferred; laptop or
tablet. Some tablet computers may not
support data recording.

Operating System Windows Vista Business Edition

service pack 1 or later

CPU P4 (or equivalent) or higher

Hard disk 20 GB with 5 GB free space

RAM 512 MB, 1 GB or higher recommended

Monitor resolution 1024 x 768 true color,
1280 x 1024 recommended

Monitor size 15" or higher

Ports 2 USB

This screen might not appear.

This screen might not appear.

1 Install the CardioPerfect software and USB drivers.

Make sure that you have administrator rights.
Close all running programs.

CardioPerfect CD.

For this installation you can ignore all but this first
menu item. If this screen does not appear, explore
the CD, and run installer ( ).

(next page)

CARDIOPERFECT

WORKSTATION

INSTALLATION GUIDE

™

Accept

The serial number and release
code are located on the inside
cover of the CD case. The
serial number consists of the
last 6 digits following the
string of zeros.

Wait while the database engine (MSDE) is installed.
It takes a few minutes.

Caution: Do not plug
in any USB devices yet.

Do not cancel. You must install this USB
driver even if you did not purchase the spirometry option.

2