Weidmüller t
DBedienungsanleitung Operating instruction
IE-SW14-24-M managed Switch
IE-SW8-M 8845740000 IE-SW6/2SCS-M 8851850000 IE-SW6/2SC-M 8845840000 IE-SW6/2ST-M 8845850000 IE-SW16-M 8845800000 IE-SW14/2SCS-M 8851860000 IE-SW14/2SC-M 8845780000 IE-SW14/2ST-M 8845790000 IE-SW24-M 8845830000 IE-SW22/2SCS-M 8851870000 IE-SW22/2SC-M 8845810000 IE-SW22/2ST-M 8845820000
Made in Germany
Table of content
Introduction
Specifications Dimensional Drawing Segment length Installation Connections Auto-MDIX
LED
Fault Relay
Power options
Management Features Declaration of conformity Warranty
12
Introduction
With the new IE-SW14-24-M facility we provide up to the 24 Ethernet ports (10/100 BaseT/TX) for the control cabinet (DIN-Rail).
Many applications need switches in the control cabinet for the distributed construction of industrial networks. The Switch is a Plug and Play device with ST or SC fiber connections.
The devices can be operated in an ambient temperature range from 0 °C to +60 °C.
Technical details
Case: |
Solid case of aluminum (IP |
20) |
|
Dimensions: |
140 x 44 x 156 (in mm) |
Input Voltage: |
DC 10 – 36 V, AC 8-24 V |
Input Power: |
Max. 20 W, power supply |
|
must deliver a minimum of |
|
6 Amps when device is |
|
turned on |
Temperature: |
0 °C up to +60 °C |
LED: |
Speed / Link/ Activity/ |
|
Temperature |
Ports: |
RJ-45 on top and bottom |
|
Fiber ST or SC |
|
2 Fiber / copper |
Compatibility: |
IEEE 802.3x and more |
Din-Rail: |
TS35 |
Data Rate: |
10BaseT/100BaseTX |
|
(Copper) 100BaseFX (Fiber) |
PLC: |
fault relay for PLC support |
Segment |
|
Length: |
Copper 100 m |
|
Fiber (multimode) 2000 m |
General |
|
Specifications: |
256 Kbyte/ per 8 Port Buffer |
|
4 K MAC addresses per 8 |
|
Port |
Aging: |
300s |
Optical Budget: |
8 dB |
|
at 62,5µm/125µm MM cable |
|
4 dB |
|
at 50µm/125µm MM cable |
|
13 dB at 9µm/125µm SM |
|
cable |
Approval: |
CE, UL 508, c-UL |
13