Weider WEMC0942.0, POWER PAK WEMC0647 User Manual

Page 1
Model No. WEMC0674.0
Visit our website at
www.weiderfitness.com
new products, prizes,
fitness tips, and much more!
erial No.
S
QUESTIONS?
As a manufacturer, we are com­mitted to providing complete customer satisfaction. If you have questions, or if a part is damaged or missing, PLEASE CONTACT OUR CUSTOMER SERVICE DEPARTMENT DIRECTLY.
CALL TOLL-FREE:
1-877-992-5999
Mon.–Fri., 6 a.m.–6 p.m. MST
ON THE WEB: www.weiderservice.com
USER’S MANUAL
CAUTION
Read all precautions and instruc­tions in this manual before using this equipment. Save this manual for future reference.
WARNING: To reduce the risk of serious injury, read the following important precautions
before using the resistance system.
1. Read all instructions in this manual and in the literature accompanying the resistance sys­tem before using the resistance system. Use the resistance system only as described in the literature.
2. It is the responsibility of the owner to ensure that all users of the resistance system are adequately informed of all precautions.
3. Keep hands and feet away from moving parts.
4 Use only the resistance included with a MAX
PACK. Do not use other types of weight with the resistance system.
5. Make sure that all parts are properly tight­ened each time the resistance system is used. Replace any worn parts immediately
6. If you feel pain or dizziness at any time while exercising, stop immediately and begin cool­ing down.
.
Page 2
BEFORE YOU BEGIN
Thank you for selecting the WEIDER®resistance sys-
em MAX PACK accessories. The MAX PACK is
t designed to increase the amount of resistance avail-
ble on the PLATINUM PLUS BY WEIDER resistance
a system.
For your benefit, read this manual carefully before using the MAX PACK and the resistance system. If
ASSEMBLY
1. Remove the Side Mech Cover (A) from the Mech Covers (B, C).
you have questions after reading this manual, see the
ront cover of this manual. To help us assist you,
f please note the product model number and serial
umber before calling. The model number is
n WEMC0674.0. The serial number can be found on the
roduct packaging. Record the serial number on the
p front cover of this manual.
1
B
C
A
2. Remove the Cover Plate (D) from the Side Mech Cover (A).
3. Locate the Sensor Wire (E) (see the inset draw­ing). Connect the Sensor Wire to the Sensor Plate (11). The connector should slide easily
into the socket and snap into place.
nector does not slide easily and snap into place, turn the connector over and then insert it. IF THE
CONNECTOR IS NOT INSERTED PROPERLY, THE CONSOLE MAY BE DAMAGED WHEN THE POWER IS TURNED ON.
Snap the Sensor Plate (1 Cover (A).
4. Replace the Side Mech Cover (A) onto the Mech Covers (B, C) (see drawing 1).
1) into the Side Mech
If the con-
2
A
D
3
E
A
11
E
Make sure that all parts are properly secured.
5.
The use of the remaining parts will be explained in the
ADJUSTMENT section.
Page 3
7
5
7
4
3
1
1
6
2
2
8
9
9
10
11
12
12
ADJUSTMENT
TTACHING THE POWER PAK
A
et the Threaded Spacer (8) into the groove on the
S Power Pak Frame (D). Insert the Pin (10) through the Side Mech Cover (A), the Top Endcaps (3, 4), and the Mech Frame (E). Fully tighten the Pin.
0
1
A
Attaching the MAX PACK to your resistance system will increase your minimum and maximum resistance levels. The resistance system can be used at a lower resistance level again by removing the MAX PACK.
D
E
4
3
8
PART LIST/EXPLODED DRAWING—Model No. WEMC0674.0 R1005A
Key No. Qty. Description
1 2 Gas Spring 2 2 Shank 3 1 Rear Top Endcap 4 1 Front Top Endcap 5 6 7 4 Gas Spring End 8 1 Threaded Spacer
9 2 Button Bolt 10 1 Pin 11 1 Sensor Plate 12 2 Oil Pad
# 1 User’s Manual
Note: “#” indicates a non-illustrated part. Specifications are subject to change without notice.
1 Front Bottom Endcap 1
Rear Bottom Endcap
Page 4
ORDERING REPLACEMENT PARTS
To order replacement parts, see the front cover of this manual. To help us assist you, please be prepared to give
he following information:
t
• the MODEL NUMBER of the product (WEMC0674.0)
the NAME of the product (WEIDER resistance system MAX PACK)
• the SERIAL NUMBER of the product (see the front cover of this manual)
• the KEY NUMBER and DESCRIPTION of the part(s) (see the PART LIST/EXPLODED DRAWING)
LIMITED WARRANTY
ICON Health & Fitness, Inc. (ICON), warrants this product to be free from defects in workmanship and material, under normal use and service conditions. ICON warrants the resistance bars for the lifetime of the product, and all other parts for five (5) years. This warranty extends only to the original purchaser. ICON's obligation under this warranty is limited to replacing or repairing, at ICON's option, the product through one of its authorized service centers. All repairs for which warranty claims are made must be pre­authorized by ICON. If the product is shipped to a service center, freight charges to and from the service center will be the customer’s responsibility. For in-home service, the customer will be responsible for a minimal trip charge. This warranty does not extend to any product or damage to a product caused by or attributable to freight damage, abuse, misuse, improper or abnormal usage or repairs not provided by an ICON authorized service center; products used for commercial or rental purposes; or products used as store display models. No other warranty beyond that specifically set forth above is authorized by ICON.
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in con­nection with the use or performance of the product or damages with respect to any economic loss, loss of property, loss of revenues or profits, loss of enjoyment or use, costs of removal or installation or other consequential damages of whatsoever nature. Some states do not allow the exclusion or limitation of inci­dental or consequential damages. Accordingly, the above limitation may not apply to you.
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of merchantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above limitation may not apply to you.
This warranty gives you specific legal rights. You may also have other rights which vary from state to state.
ICON HEAL
TH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813
Part No. 220144 R1005A
WEIDER is a registered trademark of ICON IP, Inc.
Printed in China
2004 ICON IP
©
, Inc.
Loading...