W box technologies 0E-HDMISP1X2 User Manual
Introduction
Congratulations and thank you for purchasing W Box
Technologies 0E-HDMISP1X2.
0E-HDMISP1X2 is a 1 to 2 splitter for HDMI with 4K@60Hz 4:4:4
8bit which reliably distributes one HDMI input to two HDMI
outputs. It also provides high-tech MIX EDID management and
HDCP management which authenticates HDCP encryption
between all devices, ensuring the HDMI source reliably outputs
correct content for display.
0E-HDMISPL2 is ideal for applications, such as offices, schools,
conferences rooms, shopping malls, hotels or museums, which
require the distribution of an HDMI source signal to two outputs.
Please follow the instructions in this manual to assure proper
installation and to achieve the full performance and satisfaction
you would expect from W Box Technologies.
!1
Features
•
Slim appearance and space saving
•
HDMI with 4K@60Hz 4:4:4 8bit and HDCP 2.2 compliant
•
Distributes one HDMI source to two HDMI displays
•
Supports signal transmission distance up to 33 feet (10
meters) at 4K@30Hz and 1080P, up to 10 feet (3 meters) at
4K@60Hz when used with standard HDMI cables.
•
Two EDID DIP switches on panel for EDID management
function.
•
Reshapes marginal or noisy HDMI signals, ensuring a strong,
stable digital signal
Package Contents
Before you start the installation, please check the package
contents:
•
1 x 0E-HDMISP1X2
•
1 x Power Adapter (DC 12V 0.5A)
•
2 x Mounting Brackets
•
1 x User Manual
•
1 x Datasheet
!2
Panel
Front Panel
ID.
Name
Description
1
POWER LED
Steady blue: The splitter is powered on.
2
HDMI IN LED
Steady blue: When a source device is
powered on and connected to the splitter.
OFF: No source device is connected or it
is powered off.
3
HDMI OUT
LEDs
Steady blue: The HDMI displays is
powered on and connected to
corresponding output.
OFF: No HDMI display is connected or it
is powered off.
4
EDID DIP
Switch
VIDEO / AUDIO: Switch to Compatibility
or Quality mode.
!3
Rear Panel
ID.
Name
Description
1
DC 12V Port
Connects to DC 12 V 0.5 A power
adapter.
2
HDMI OUT1 Port
Connects to HDMI display using
HDMI cable.
3
HDMI IN Port
Connects to an HDMI source using
HDMI cable.
4
HDMI OUT2 Port
Connects to HDMI display using
HDMI cable.
!4
Installation
1. Connect an HDMI source device (such as a Blu-ray player) to
the splitter HDMI IN port. As show number 1 in figure.
2. Connect 2 HDMI displays (such as HD monitors) to the splitter
HDMI OUT ports. As show number 2,3 in figure.
3. Set the EDID DIP switches to the proper position. For more
information, please refer to EDID management section.
4. Connect the power adapter to DC 12V port. As show number
4 in figure.
5. Connect all the devices to their power adapter, power them on
and start the operation.
EDID Management
!5
Loading...