WBOX Technologies 0E-4CHNVR1TB, 0E-HD4C1TB, 0E-HD8C2TB, 0E-4CHNVR2TB, 0E-8CHNVR2TB Step-by-step Manual/how-to

Hybrid DVR

NVR

0E-HD4C1TB

0E-4CHNVR1TB / 0E-4CHNVR2TB

0E-HD8C2TB

0E-8CHNVR2TB

0E-HD16C2TB

0E-16CHNVR2T / 0E-16CHNVR4T

Step-by-step Guide/How-to

How can I enable the motion detection recording on DVR V4.2 or NVR V4.2?

Product Models:

Firmware Version: V4.2.XXXX.0000.157.X.XX.X.X

Preparation:

If you would like the device to record on motion detection only, please ensure to DISABLE the SCHEDULED

RECORDING. To do this, please follow the steps below.

1. On the device’s main page, click the right mouse button and select Record Schedule under Record.

2. Choose a specific Channel and disable the Record Enable option. Click Apply to save the settings.

Technical Support Hotline: [phone] (Option 1) • Email Address: [e-mail]

Website: www.wboxtech.com

Step-by-step Guide/How-to

3. If you would like to disable the scheduled recording for the other channels, click Copy and select the specific

channel you would like to copy the setting. Click OK then Apply to save the changes.

Procedure:

1. Click the right mouse button and select General under Alarm.

Technical Support Hotline: [phone] (Option 1) • Email Address: [e-mail]

Website: www.wboxtech.com