VTech VSP715A, VSP725A, VSP735A, VSP600A, VCS754A Configuration Manual

VTech IP Phone Configuration

Guide

Version 1.1

Date: January 28th, 2016

Yeastar Information Technology Co. Ltd.

VTech IP Phone Configuration Guide

2/17

Contents

INTRODUCTION..................................................................................................................................... 3

FOR VSP715A/725A/735A IP PHONES............................................................................................ 4

Environment

..........................................................................................................................

4

Configuration

.........................................................................................................................

4

1. Configuring account

.....................................................................................................

4

2. Configuring voicemail

..................................................................................................

7

3. Configuring programmable key

..................................................................................

8

FOR VSP600A DECT PHONE............................................................................................................. 9

Environment

..........................................................................................................................

9

Configuration

.........................................................................................................................

9

1. Connecting the VSP600A DECT base station........................................................ 9

2. Configuring account

..................................................................................................

10

3. Configuring voicemail

................................................................................................

12

4. Registering the handset to the base station

..........................................................

13

5. Configuring handsets on base station....................................................................13

FOR VCS754A CONFERENCE PHONE

..........................................................................................

15

Environment........................................................................................................................15

Configuration

......................................................................................................................

15

1. Configuring account

..................................................................................................

15

2. Testing calls

................................................................................................................

17

VTech IP Phone Configuration Guide

3/17

Introduction

This guide shows you how to manually configure the VTech IP Phones with MyPBX. It

has been tested with the latest firmware version supported by MyPBX firmware

version X.19.0.47.

Including Models:



VSP715A IP Phone

 VSP725A IP Phone

 VSP735A IP Phone



VSP600A DECT Phone



VCS754A Conference Phone

VTech IP Phone Configuration Guide

4/17

For VSP715A/725A/735A IP Phones

Configuring VSP715A/725A/735A IP Phones with MyPBX.

Since their web interface and configuration are almost the same. So we only take the

VSP735A as example in the following paragraphs.

Environment

This configuration guide is based on the following software versions:

VSP715A: 1.1.2.A

VSP725A: 1.1.2.A

VSP735A: 1.1.2.A

MyPBX: X.19.0.47

Configuration

1. Configuring account

Generally it is recommended that you deploy the VTech IP phone in the same IP

segment with MyPBX so that there can communicate with each other. Then log in the

web interface of VTech VSP735A. Go to the menu (System>SIP Account

Management), and select one account to configure. Next, follow the recommended

configuration of the account page in the following:

General Account Settings

Enable Account: checked.

Account Label: optional.

Display Name: optional.

User Identifier: the caller id of the MyPBX extension, usually it’s the extension number.

VTech IP Phone Configuration Guide

5/17

Authentication Name: fill in the register name of MyPBX extension.

Authentication Password: fill in the password of MyPBX extension.

SIP Server

Server Address: the IP address of MyPBX.

Port: the SIP port of MyPBX, by default, it is 5060 on MyPBX.

Registration

Server Address: the IP address of MyPBX.

Port: the SIP port of MyPBX, by default, it is 5060 on MyPBX.

You can also refer to the configuration of the red frame in the following figure.

VTech IP Phone Configuration Guide

6/17

Figure - Account Page

To get the extension registration information, you can log in the web interface of

MyPBX. Go to the menu (PBX>Extensions>FXS/VoIP Extensions), and open the right

extension edit page.