VTech Peek at Me Bunny, Peek at Me Bunny Pink Owner's Manual

Page 1
User’s Manual
Peek At Me Bunny
TM
© 2011 VTech
Printed in China
91-002538-000-006
Page 2
Dear Parent,
ese unique interactive learning ts directly respond to what children do naturally – play! Using innovative technology, these ts react to baby’s interactions, making each play perience fun and unique as th learn age-appropriate concepts like first words, numbers, shapes, colors and music. More importantly, VTech®’s Infant Learning® ts develop baby’s mental and physical abilities by inspiring, engaging and teaching.
At VTech®, we know that a child has the ability to do great things. at’s why all  our electronic learning products are uniquely designed to develop a child’s mind and allow them to learn to the best  their ability. We thank you for trusting VTech® with the important job  helping your child learn and grow!
Sincerely,
Your iends at VTech®
To learn more about the Infant Learning® series and her VTech® ts, visit www.vtechkids.com
Page 3
INTRODUCTION
Thank you for purchasing the VTech® Peek At Me Bunny™ learning toy.
Peek-a-boo, baby! The VTech® Peek At Me Bunny™ has two playful sensors for an interactive play experience. The sound sensor activates peaceful sounds, endearing and playful phrase as well as short tunes. Cover the eyes with the bunny’s ears and the bunny will engage babies in a game of peek-a-boo. Press buttons in the hands and feet introduce a variety of curriculum, fun sounds, songs and melodies. The music mode offers five minutes of continuous lullaby music or nature sounds to help calm little ones after a busy day.
PEEK-A-BOO SENSOR
Introduction
TRIANGLE BUTTON
ON/OFF/MODE SELECTOR BUTTON
SQUARE
BUTTON
CIRCLE BUTTON
2
Page 4
INCLUDED IN THIS PACKAGE
- One VTech® Peek At Me Bunny
- One instruction manual
WARNING: All packing materials, such as tape, plastic sheets,
packaging locks and tags are not part of this toy, and should be discarded for your child’s safety.
NOTE: Please keep this instruction manual as it contains
important information.
Attention : pour la sécurité de votre enfant, débarrassez-vous
de tous les produits d’emballage tels que rubans adhésifs, feuilles de plastique, attaches et étiquettes. Ils ne font pas partie du jouet.
TM
GETTING STARTED
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the back of the unit. Use a screwdriver to loosen the screw.
3. Install 2 new ‘AA’ batteries following the diagram inside the battery box. (The use of new alkaline batteries is recommended for maximum performance.)
4. Replace the battery cover and tighten the screw to secure.
BATTERY NOTICE
• The use of new alkaline batteries is recommended for maximum
performance.
• Non-rechargeable batteries are not to be recharged.
Instructions & Activities
33
Page 5
• Rechargeable batteries are to be removed from the toy before
being charged (if removable).
• Rechargeable batteries are only to be charged under adult
supervision (if removable).
• Do not mix old and new batteries.
• Do not mix batteries of different types: alkaline, standard (carbon-
zinc) or rechargeable (nickel-cadmium).
• Only batteries of the same or equivalent type as recommended
are to be used.
• Batteries are to be inserted with the correct polarity.
• Exhausted batteries are to be removed from the toy.
• The supply terminals are not to be short-circuited.
• The toy is not to be connected to more than the recommended
number of power supplies.
• Do not dispose of batteries in fire.
WE DO NOT RECOMMEND THE USE OF RECHARGE ABLE BATTERIES.
PRODUCT FEATURES
1. ON/OFF/MODE SELECTOR BUTTON
To turn the unit ON, press the ON/ OFF/MODE SELECTOR BUTTON on the foot of the bunny. Press the ON/ OFF/MODE SELECTOR BUTTON once to enter the Play Mode. Press it a second time to enter the Night Mode. Press the ON/OFF /MODE SELECTOR BUTTON a third time to turn the unit OFF.
Instructions & Activities
4
Page 6
2. PEEK-A-BOO SENSOR
The VTech® Peek At Me BunnyTM is equipped with a sensor above the eyes. This sensor is activated by magnets. Pull down one or both of the ears to make a connection between the magnet(s) above the bunny’s eyes and the magnet(s) in the bunny’s ears.
3. AUTOMATIC SHUT-OFF
To preserve battery life, the VTech® Peek At Me BunnyTM will automatically power-down after approximately 30 seconds without input in the Play Mode. In the Night Mode, the unit will automatically power down after playing 2 or 3 melodies. The unit can be turned on again by pressing any button.
ACTIVITIES
1. Press the on/off/m od e sel ec to r button to turn the unit on. You will
hear a playful phrase, sounds and a sung song in the Play Mode. The light will flash with the sound. In the Night Mode, you will hear a phrase and soft melody. The light will fade in and out with the sound.
Instructions & Activities
2. Press the Mode to learn colors, shapes, size and hear fun phrases and sounds. The light will flash with the sound. In the Night Mode, you will hear a variety of soft melodies. The light will fade in and out with the sound.
triangle button in the Play
5
Page 7
3. Press the square button in the Play Mode to learn colors, shapes, size and hear fun phrases and sounds. The light will flash with the sound. In the Night Mode, you will hear a variety of soft melodies. Press the square button when a melody is playing to hear a variety of phrases. The light will fade in and out with the sound.
4. Press the Mode to learn colors, shapes, size and hear fun phrases and sounds. The light will flash with the sound. In the Night Mode, you will hear two minutes of soft melodies. Press the circle button while a melody is playing to play a variety of sounds. The light will fade in and out with the sound.
5. Cover the bunny’s eyes with the bunny’s ears to activate the sensor and play peek-a-boo in the Play Mode. The light will flash with the sound. In the Night Mode, you will hear a variety of sounds. The light will fade in and out with the sound.
6. The In the Day Mode after you hear the phrases “Clap your hands” or “Tap your feet”, activate the sound sensor by clapping, tapping or making any loud noise, you will hear a rewarding phrase. In the Night Mode, after the unit has automatically powered down and the sound sensor detects several seconds of consistent sound (i.e. crying), the unit will play two soft melodies.
circle button in the Play
VTech® Peek At Me BunnyTM is equipped with a sound sensor.
Instructions & Activities
6
Page 8
MELODY LIST
1. Ah! Vous dirai-je maman?
2. All Through the Night
3. Beautiful Dreamer
4. Cradle Song
5. Fais Dodo
6. Home Sweet Home
7. La Berceuse
8. Lavender’s Blue
9. Morning
10. Rock-A-Bye Baby
SUNG SONG LYRICS
Clap your hands along with me, Tap your feet, sing with me. Playing with you is so much fun. I love you!
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct heat
source.
3. Remove the batteries when the unit is not in use for an extended
period of time.
4. Do not drop the unit on hard surfaces and do not expose the unit
to moisture or water.
Care & Maintenance
7
Page 9
TROUBLESHOOTING
If for some reason the program/activity stops working or malfunctions, please follow these steps:
1. Please turn the unit
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit
5. If the product still does not work, replace with an entire set of new batteries.
If the problem persists, please call our Consumer Services Department at 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada, and a service representative will be happy to help you.
For information on this product’s warranty, please call VTech® at 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada.
IMPORTANT NOTE:
Creating and developing Infant Learning products is accompanied by a responsibility that we at VTech ® take very seriously. We make every effort to ensure the accuracy of the information, which forms the value of our products. However, errors sometimes can occur. It is important for you to know that we stand behind our products and encourage you to call our Consumer Services Department at 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada, with any problems and/or suggestions that you might have. A service representative will be happy to help you.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
OFF.
ON. The unit should now be ready to play again.
Troubleshooting
8
Page 10
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help
Caution: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003.
CET APPAREIL NUMÉRIQUE DE LA CLASSE B EST CONFORME À LA NORME NMB-003 DU CANADA.
Other Info
9
Loading...