®
Dear Parent:
At VTECH® we know that a child has the ability to do great things.
That’s why all of our electronic learning products are uniquely
designed to develop a child’s mind and allow them to learn to the
best of their ability. Whether it’s introducing numbers and letters,
identifying colors and shapes, or stimulating senses with lights
and music, all VTECH® infant and toddler learning products
encourage your child’s natural growth and discovery skills. When
it comes to providing electronic learning products that enlighten,
entertain and develop minds, at VTECH® we see the potential in
every chizà.
1
INTRODUCTION
Thank you for purchasing the Old MacDonald’s Puzzle Pals™ learning
toy! This product is one of a family of high-quality electronic learning toys.
We at VTECH® are committed to providing the best possible products to
entertain and educate your child. Should you have any questions or
concerns, please call our Consumer Services Department at 1-800-5212010 in the U.S. or 1-800-267-7377 in Canada.
The Old MacDonald’ s Puzzle Pals™ learning toy is a fun and rewarding
game that teaches your child about familiar animals while developing
their hand-eye coordination and logic skills. Y our child and their barnyard
buddies will have hours of fun while learning through discovery!
ON/OFF/MODE
SELECTOR SWITCH
LIGHT-UP
NEST
CHICKEN
PUZZLE
PIECE
COW
PUZZLE
PIECE
LIGHT-UP
BUCKET
DUCK
PUZZLE
PIECE
a
l
d
n
’
s
o
P
D
u
c
z
a
M
d
l
O
®
z
l
e
P
a
l
™
s
LIGHT-UP
BEE
LIGHT-UP
FLOWER
SPEAKER
COVER
SHEEP
PUZZLE
PIECE
PIG
PUZZLE
PIECE
LIGHT-UP
APPLE
2
HIGH/LOW VOLUME
SWITCH
BA TTERY
DOOR
INCLUDED IN THIS PACKAGE
- One VTECH® Old MacDonald’s Puzzle Pals™ learning toy.
- One instruction manual.
WARNING:All packing materials such as tape, plastic sheets, wire
ties and tags are not part of this toy, and should be
discarded for your child’s safety .
3
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the bottom
of the unit. Use a screwdriver to loosen
the screw.
3. Install 2 new “AA” (UM-3/LR6) batteries
following the diagram inside the battery
box. (The use of new alkaline batteries is
recommended for maximum performance.)
4. Replace the battery cover and tighten the
screw to secure the battery cover.
4
BATTER Y NOTICE
• Install batteries correctly observing the polarity (+, -) signs to avoid
leakage.
• Do not mix old and new batteries.
• Do not use batteries of different types.
• Remove exhausted or new batteries from the equipment when the
unit will not be used for an extended period of time.
• Do not dispose of batteries in fire.
• Do not attempt to recharge ordinary batteries.
• The supply terminals are not to be short-circuited.
WE DO NOT RECOMMEND THE USE OF RECHARGEABLE
BATTERIES.
NOTE: If for some reason the program/activity stops working, then please
follow these steps:
1. Please turn the unit off.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit on. The unit should now be ready to play again.
If the problem persists, please call our Consumer Services
Department at 1-800-521-2010 in the U.S. or 1-800-267-7377 in
Canada, and a service representative will be happy to help you.
5
TO BEGIN PLAY
1. Slide the ON/OFF/MODE SELECTOR
SWITCH to either the MELODY MODE
( ) or TALKING MODE ( ) position
to turn the unit ON.
2. T o adjust the volume, slide the VOLUME
CONTROL SWITCH located on the back
of the unit to ( ) for LOW VOLUME or
( ) for HIGH VOLUME.
3. Slide the ON/OFF/MODE SELECTOR
SWITCH to the OFF ( ) position to turn
the unit OFF.
AUTOMATIC SHUT-OFF
To preserve battery life, the Old MacDonald’s Puzzle Pals™ learning
toy will turn off automatically after a few minutes without input. The unit
can be turned on again by pressing any button.
6
ACTIVITIES
A. T alking Mode
1. Slide the ON/OFF/MODE SELECTOR
SWITCH to the TALKING MODE( )
position. You will hear “Let’s play!”
followed by a short tune and the lights
will flash.
2. Put the CHICKEN PUZZLE PIECE into
the CHICKEN SLOT. Y ou will hear “Old
MacDonald had a chicken” followed by
a “Cluck Cluck” sound and a part of the
melody “
The lights will flash with the sounds.
3. Put the COW PUZZLE PIECE into the
COW SLOT. You will hear “Old
MacDonald had a cow” followed by a
“Moo Moo” sound effect and a part of
the melody “
Farm”
melody.
Old MacDonald Had A Farm”
Old MacDonald Had A
. The lights will flash with the
“Let’s play!”
“Old MacDonald
had a chicken.
Cluck Cluck”
.
“Old MacDonald
had a cow.
Moo Moo”
VTECH
Printed in China
91-01454-000
7
4. Put the SHEEP PUZZLE PIECE into
the SHEEP SLOT. You will hear “Old
MacDonald had a sheep” followed by a
“Baa Baa” sound effect and a part of
the melody “
Farm”
Old MacDonald Had A
. The lights will flash with the
melody.
5. Put the DUCK PUZZLE PIECE into the
DUCK SLOT. You will hear “Old
MacDonald had a duck” followed by a
“Quack Quack” sound effect and a part
of the melody “
Farm”
. The lights will flash with the
Old MacDonald Had A
melody.
“Old MacDonald
had a sheep.
Baa Baa”
“Old MacDonald
had a duck.
Quack Quack”
6. Put the PIG PUZZLE PIECE into the
PIG SLOT. You will hear “Old
MacDonald had a pig” followed by an
“Oink Oink” sound effect and a part of
the Melody “
Farm”
Old MacDonald Had A
. The lights will flash with the
melody.
8
“Old MacDonald
had a pig.
Oink Oink”
7. If the puzzle pieces are inserted into their
respective slots in sequential order, the
entire melody
Farm"
will play with different animal
"Old MacDonald Had A
sound effects after all of the pieces have
been placed in their respective slots.
8. If there is no input to the unit for 10
seconds, you will hear “Let’s play”
followed by a short tune. The lights will
flash with the melody.
9. If there is no input for 20 seconds, you
will hear “Old MacDonald had a...”
followed by a random animal sound
effect. The lights will flash with the
sounds.
B. Melody Mode
1. Slide the ON/OFF/MODE SELECTOR
SWITCH to the MELODY MODE ( )
position to hear a short tune. The lights
will flash with the melody.
9
“Let’s play!”
“Old MacDonald
had a sheep.
Baa Baa”
2. Put the CHICKEN PUZZLE PIECE into
the CHICKEN SLOT. You will hear a
“Cluck Cluck” sound effect followed by
a melody. The lights will flash with the
melody.
“Cluck Cluck”
3. Put the COW PUZZLE PIECE into the
COW SLOT. Y ou will hear a “Moo Moo”
sound effect followed by a melody . The
lights will flash with the melody.
4. Put the SHEEP PUZZLE PIECE into the
SHEEP SLOT . You will hear a “Baa
Baa” sound effect followed by a melody .
The lights will flash with the melody.
5. Put the DUCK PUZZLE PIECE into the
DUCK SLOT. You will hear a “Quack
Quack” sound effect followed by a
melody. The lights will flash with the
melody.
10
“Moo Moo”
“Baa Baa”
“Quack Quack”
6. Put the PIG PUZZLE PIECE into the PIG
SLOT. Y ou will hear an “Oink Oink” sound
effect followed by a melody. The lights
will flash with the melody.
7. After all the puzzles pieces are placed
into their slots, you will hear the melody
“
Old MacDonald Had A Farm
”.
“Oink Oink”
8. If there is no input for 20 seconds, you
will hear “Old MacDonald had a...”
followed by a random animal sound
effect. The lights will flash with the
sounds.
11
“Old MacDonald
had a ...”
MELODY LIST:
1. Happy Farmer
2. Old Grey Mare
3. Baa, Baa, Black Sheep
4. Bingo
5. Farmer In The Dell
6. Old MacDonald Had A Farm
CARE AND MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct heat
source.
3. Remove the batteries when the unit is not in use for an extended
period of time.
4. Do not drop the unit on hard surfaces and do not expose the unit to
moisture or water.
12
IMPORTANT NOTE
Creating and developing toddler products is accompanied by a
responsibility that we at VTECH® take very seriously. W e make every
effort to ensure the accuracy of the information, which forms the
value of our products. However, errors sometimes can occur. It is
important for you to know that we stand behind our products and
encourage you to call our Consumer Services Department at 1-800521-2010 in the U.S. or 1-800-267-7377 in Canada with any problems
and/or suggestions that you might have. A service representative
will be happy to help you.
Note:
This equipment generates and uses radio frequency energy and if not
installed and used properly, that is, in strict accordance with the
manufacturer’s instructions, it may cause interference to radio and
television reception. It has been type tested and found to comply within
the limits for a Class B computing device in accordance with the
specifications in Sub-part J of Part 15 FCC Rules, which are designed to
provide reasonable protection against such interference in a residential
installation. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause interference with
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• reorient the receiving antenna
• relocate this product with respect to the receiver
• move this product away from the receiver
13
Loading...