VOX Adio Air GT modeling gitaarversterker / bluetooth speaker, Adio Air BS modeling basgitaarversterker / bluetooth speaker Driver Handleiding

VOX BLE-MIDI Driver for Windows

Adio Air GT/BS can connect wirelessly with Windows 8.1 and Windows 10 computers using Bluetooth
low energy (LE) and the VOX BLE-MIDI driver.

Supported Operating Systems

Windows 8.1
Windows 10

Requirements

PC with hardware support for Bluetooth low energy
USB Bluetooth low energy Adapter
The following adapters have been tested and are known to work with the VOX BLE-MIDI Driver:

Windows 8.1 and Windows 10

SANWA MM-BTUD44
ELECOM logitec LBT-UAN04C1BK
PLANEX COMM. BT-Micro4
PRiNCETON PTM-UBT7
k2w trade USB BLUETOOTH DONGLE
Kensington Bluetooth 4.0 USB Adapter
Panda Wireless Panda Wireless BT 4.0
SoundBot SB340
GHS2 BT403
TREND NET TBW-106UB

Windows 10 only

IO DATA USB-BT40LE
inateck BTA-BC4B6
plugable USB-BT4LE
IOGEAR GBU521

Compatible Products

Adio Air GT/BS

For Bluetooth connection

Use Windows Bluetooth settings to connect the computer with the Bluetooth MIDI device. Connection
using the dedicated software that comes with the Bluetooth USB adapter is not supported.

1

Driver installation

Run Setup.exe and follow the instructions to install.

In order to install or uninstall the driver, you must have full administrative privileges. If you do not have
the necessary privileges, please contact your system administrator.

Connections

First “Pairing” process is required to connect Windows and a Bluetooth MIDI device.

1. Turn on the Bluetooth MIDI device, and enable its wireless functionality.

2. Click the Bluetooth icon in the task tray, and choose “Show Bluetooth Devices.”

3. Click “Add Bluetooth or other device” in the ”Bluetooth & other devices” windows.

TIP If the version of Windows is before Windows 10 Creators Update, “Manage Bluetooth devices”

window will be shown. Choose a device indicated as “Ready to pair” and click “Pair”, then

proceed to the 6.

2

4. Select “Bluetooth” in “Add a device” window.

5. Select your device from the list

6. Once the device is connected to Windows, ”Connected“ is shown and click “Done”.

7. Launch the MIDI application such as Tone Room and the connection will be finished.

Note

This cannot be used by multiple MIDI applications simultaneously.

•
If the Bluetooth MIDI device fails to connect to the PC when you launch the MIDI application,

•
please remove the device from the list of the ”Bluetooth & other devices” window or the “Manage

Bluetooth devices” window and pair it again.
After installing the major update like Windows 10 Creators Update, please remove the all Bluetooth

•
MIDI devices previously paired from the list of the ”Bluetooth & other devices” window and pair the

devices again.

3

1 Harrison Close, Knowlhill, Milton Keynes, MK5 8PA. UK

© 2017 VOX AMPLIFICATION LTD.

Vox Amplification Ltd.

www.voxamps.com