IMPORTANT SAFETY INSTRUCTIONS
• Read these instructions.
•Keep these instructions.
• Heed all warnings.
•Follow all instructions.
• Do not use this apparatus near water.
• Mains powered apparatus shall not be exposed to dripping or
splashing and that no objects filled with liquids, such as vases,
shall be placed on the apparatus.
• Clean only with dry cloth.
• Do not block any ventilation openings, install in accordance with
the manufacturer’s instructions.
• Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
• Do not defeat the safety purpose of the polarized or groundingtype plug. A polarized plug has two blades with one wider than
the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided
for your safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet. (for
U.S.A. and Canada)
• Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
• Only use attachments/accessories specified by the manufacturer.
• Unplug this apparatus during lightning storms or when unused for
long periods of time.
•Turning off the power switch does not completely isolate this
product from the power line so remove the plug from the socket if
not using it for extended periods of time.
• Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate normally,
or has been dropped.
• Do not install this equipment on the far position from wall outlet
and/or convenience receptacle.
• Do not install this equipment in a confined space such as a box
for the conveyance or similar unit.
• Use only with the cart, stand, tripod, bracket, or table specified by
the manufacturer, or sold with this apparatus. When a cart is
used, use caution when moving the cart/apparatus combination
to avoid injury from tip-over.
The lightning flash with arrowhead symbol
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the product.
THE FCC REGULATION WARNING (for U.S.A.)
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Unauthorized changes or modification to this system can void
the user’s authority to operate this equipment.
CE mark for European Harmonized Standards
CE mark which is attached to our company’s products of AC
mains operated apparatus until December 31, 1996 means it
conforms to EMC Directive (89/336/EEC) and CE mark
Directive (93/68/EEC).
And, CE mark which is attached after January 1, 1997 means it
conforms to EMC Directive (89/336/EEC), CE mark Directive
(93/68/EEC) and Low Voltage Directive (73/23/EEC).
Also, CE mark which is attached to our company’s products of
Battery operated apparatus means it conforms to EMC
Directive (89/336/EEC) and CE mark Directive (93/68/EEC).
IMPORTANT NOTICE TO CONSUMERS
This product has been manufactured according to strict
specifications and voltage requirements that are applicable in
the country in which it is intended that this product should be
used. If you have purchased this product via the internet,
through mail order, and/or via a telephone sale, you must verify
that this product is intended to be used in the country in which
you reside.
WARNING: Use of this product in any country other than that
for which it is intended could be dangerous and could invalidate
the manufacturer’s or distributor’s warranty.
Please also retain your receipt as proof of purchase otherwise
your product may be disqualified from the manufacturer’s or
distributor’s warranty.
2
Introduction
WELCOME ABO ARD AGAIN!
any thanks for adding a VOX Valvetronix VTX combo to your sonic arsenal.
We’re sure it’ll give you countless hours of great guitar tones that will
M
the original Combo Manual. In this we’ll cover the new NeoDog speakers,
cabinet construction, correctly connecting external speakers and the new Imped-
ance Select Switch for your AD60VTX or AD120VTX combo. Everything else, and
I mean everything else is already covered in the original Combo Manual... I mean
Guitarists Guide
crack open the “Guide” man! It’s all there... except for what’s here.
Right. Moving on. You’ll notice that almost all the functions of these combos are
identical to the original AD60VT and AD120VT combos. So what’s different and
why am I reading this addendum do you ask? Did you read the above? Speakers,
cabinets, connecting the speakers and impedance settings, that’s why you’re reading this! Let’s move on shall we?
The new AD60VTX and AD120VTX combos both feature newly designed Custom
VOX/Celestion Neodymium magnet 8 Ohm speakers (dubbed
highly efficient, extremely lightweight and SOUND GREAT.
In addition to the new NeoDog speakers, we now house them in an all-new upgraded ply cabinet for improved tonal balance.
as good as they sound! You may have noticed that this is an addendum to
! So if you’re sitting down, rocking out and have a few questions,
NeoDog
) that are
feel
new
As if that weren’t enough we’ve also fine-tuned the power section of this amplifier to
run more efficiently with the new NeoDog speakers.
On the back panel you’ll also notice the inclusion of an Impedance Select Switch.
What this does is allow you to hook up external speaker cabinets and maintain
maximum power. As mentioned the internal speakers are 8 Ohms so when using
the internal speakers only set the Impedance Selector to 8 Ohms. If and when you
hook up another cabinet, you have to make sure the external cabinet is either 4
Ohms or 8 Ohms only. Do not use a 16 Ohm cabinet. Please read below for correctly hooking these up.
IMPORTANT NOTE: DO NOT use an external speaker cabinet with a Wattage rating of
less than 30 Watts (or 40 watts if you are using a 4 Ohm external speaker cabinet), or less
than the output power you’ve selected with the POWER SELECT control (see page 19 in
Guitarists Guide
recommended.
ANOTHER IMPORTANT NOTE: ALWAYS use speaker cables (unshielded) to connect
speaker cabinets. NEVER use guitar (shielded) cables.
). If you ignore this, you could end up blowing a speaker— and that’s not
A
3