Vizio VX37LHDTV10A User Manual

VIZIO VX37L HDTV10A User Manual

Dear VIZIO Customer,

Congratulations on your new VIZIO VX37L High Definition LCD Television purchase. Thank you for your support. For maximum benefit of your set, please read these instructions before making any adjustments, and retain them for future reference. We hope you will experience many years of enjoyment from your new VIZIO VX37L High Definition Television.

For assistance, please call 714-668-0588 or email us at

techsupport@vinc.com.

To purchase or inquire about accessories and installation services for your VIZIO LCD HDTV,

please visit our website at

www.VIZIO.com or

call toll free at 888-VIZIOCE (888-849-4623).

We recommend you register your VIZIO VX37L HDTV10A either at our website

www.VIZIO.com

or fill in your registration card and mail it in. For peace of mind and to protect your investment beyond the standard warranty, VIZIO offers onsite extended warranty service plans. These plans give additional coverage during the standard warranty period. Visit our website or call us to purchase a plan.

Write down the serial number located on the back of your VX37L.

__ __ __ __ __ __ __ __ __ __ __ __ __ __

Purchase Date _____________________

VIZIO is a registered trademark of V, Inc.

HDMI logo and “High Definition Multimedia Interface” are registered trademarks of HDMI Licensing LLC.

Version 1/25/2007 1

www.VIZIO.com

VIZIO VX37L HDTV10A User Manual

THIS PRODUCT HAS BEEN DESIGNED AND TESTED FOR COMPLIANCE WITH REGULATORY SAFETY CERTIFICATIONS

This product is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire. To prevent the product from being damaged, the following rules should be observed for the installation, use and maintenance of the product. Read the following safety instructions before operating the display. Keep these instructions in a safe place for future reference.

• To avoid the risk of electric shock or component damage, switch off the power before connecting other components to the VX37L LCD HDTV.

• Unplug the power cord before cleaning the VX37L LCD HDTV. A damp cloth is sufficient for cleaning the VX37L LCD HDTV. Do not use a liquid or a spray cleaner for cleaning the product. Do not use abrasive cleaners.

• Always use the accessories recommended by the manufacturer to insure compatibility.

• When moving the VX37L LCD HDTV from an area of low temperature to an area of high temperature, condensation may form on the

housing. Do not turn on the VX37L LCD HDTV immediately after this to avoid causing fire, electric shock or component damage.

• Do not place the VX37L LCD HDTV on an unstable cart, stand, or table. If the VX37L LCD HDTV falls, it can injure a person and cause serious damage to the appliance. Use only a cart or stand recommended by the manufacturer or sold with the VX37L LCD HDTV.

• A distance of at least 3 feet should be maintained between the VX37L LCD HDTV and any heat source, i.e. radiator, heater, oven, amplifier etc. Do not install the product close to smoke. Operating the product close to smoke or moisture may cause fire or electric shock.

• Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable operation of the VX37L LCD HDTV and to protect it from overheating, be sure these openings are not blocked or covered. Do not place the VX37L LCD HDTV in a bookcase or cabinet unless proper ventilation is provided.

• Never push any object into the slot on the VX37L LCD HDTV cabinet. Do not place any objects on the top of the product. It could short circuit parts causing a fire or electric shock. Never spill liquids on the VX37L LCD HDTV.

• The VX37L LCD HDTV should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.

• The power cable must be replaced when using different voltage from that specified in the User Manual. For more information, contact your dealer.

• The VX37L LCD HDTV is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug will fit only into a grounded power outlet as a safety feature. If your outlet does not accommodate the three-wire plug, have an electrician install

the correct outlet, or use an adapter to ground the appliance safely.

Do not defeat the safety purpose of the

grounded plug.

• Do not overload power strips and extension cords. Overloading can result in fire or electric shock.

• The wall socket shall be installed near the equipment and shall be easily accessible.

• Only the marked power source can be used for the product. Any power source other than the specified one may cause fire or electric

shock.

• Do not touch the power cord during lightning. To avoid electric shock, avoid handling the power cord during electrical storms.

• Unplug the unit during a lightening storm or when it will not be used for long period of time. This will protect the VX37L LCD HDTV from

damage due to power surges.

• Do not attempt to repair or service the product yourself. Opening or removing the back cover may expose you to high voltages, the risk of electric shock, and other hazards. If repair is required, please contact your dealer and refer all servicing to qualified service personnel.

• Keep the product away from moisture. Do not expose this appliance to rain or moisture. If water penetrates into the product, unplug the power cord and contact your dealer. Continuous use in this case may result in fire or electric shock.

• Do not use the product if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord and contact your dealer immediately. Do not try to repair the product yourself.

• Avoid using dropped or damaged appliances. If the product is dropped and the housing is damaged, the internal components may function abnormally. Unplug the power cord immediately and contact your dealer for repair. Continued use of the product may cause fire or electric shock.

• Do not install the product in an area with heavy dust or high humidity. Operating the product in environments with heavy dust or high humidity may cause fire or electric shock.

• Follow instructions for moving the product. Ensure that the power connector and any other cables are unplugged before moving the product.

• Hold the power connector when removing the power cable. Pulling the power cable itself may damage the wires inside the cable and cause fire or electric shock. When the product will not be used for an extended period of time, unplug the power connector.

• To avoid risk of electric shock, do not touch the connector with wet hands.

• Insert batteries in accordance with instructions. Incorrect polarities may cause damage and leakage of the batteries, operator injury

and contamination the remote controller.

• If any of the following occurs please contact the dealer:

o The power connector fails or frays. o Liquid sprays or any object drops into the VX37L LCD HDTV. o The Display is exposed to rain or other moisture. o The Display is dropped or damaged in any way. o The performance of the Display changes substantially.

Version 1/25/2007 2

www.VIZIO.com

VIZIO VX37L HDTV10A User Manual

Television Antenna Connection Protection

External Television Antenna Grounding

If an outside antenna/satellite dish or cable system is to be connected to the TV, make sure that the antenna or cable system is electrically grounded to provide some protection against voltage surges and static charges.

Article 810 of the National Electrical Code, ANSI/NFPSA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of the grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements of the grounding electrode.

Lightning Protection

For added protection of the TV during a lightning storm or when it is left unattended or unused for long periods of time, unplug the TV from the wall outlet and disconnect the antenna or cable system.

Power Lines

Do not locate the antenna near overhead light or power circuits, or where it could fall into such power lines or circuits.

Remember, the screen of the coaxial cable is intended to be connected to earth in the building installation.

Version 1/25/2007 3

www.VIZIO.com

VIZIO VX37L HDTV10A User Manual

Opening the Package

Your VIZIO VX37L HDTV10A and it accompanying accessories are carefully packed in a cardboard carton that has been designed to protect it from transportation damage. Now you have opened the carton check that the VX37L HDTV10A is in good condition and that all of the accessories are included.

The VX37L HDTV10A weighs approximately 44lb and is over 36” wide; we advise that you have at least 2 people to unpack and install the HDTV.

The screen can easily be scratched or broken so please handle the product gently and never place the HDTV with the glass facing downwards on a surface without protective padding.

IMPORTANT: Save the carton and packing material for future shipping.

Package Contents

VIZIO VX37L HDTV10A VIZIO Remote Control AV Cable (Yellow, Red and White Connectors) Power Cord VIZIO Bezel and Screen Cleaning Cloth This User Manual Quick Setup Guide Registration Card VIP Services Brochure

Additional Certified Accessories for the VIZIO VX37L HDTV10A are sold separately

Wall Mounts High Definition Cables Extra or replacement Remote

VIZIO also offers Installation Services and Extended Warranty Services for your VIZIO VX37L HDTV10A

To purchase or inquire about additional accessories and services for your VIZIO product, visit our web site at www.VIZIO.com

Version 1/25/2007 4

or call us toll free at 888-VIZIOCE (888-849-4623)

www.VIZIO.com

VIZIO VX37L HDTV10A User Manual

Installation Preparation

Please read this user manual carefully before installing your VIZIO HDTV. The power consumption of the TV is about 210W, please use the power cord designated for TV. When

an extension cord is required, use one with the correct power rating. The cord must be grounded and the grounding feature must not be defeated.

The TV should be installed on a flat surface to avoid tipping. For proper ventilation, you must allow space between the back of the TV and the wall. If you would like to mount your TV on the wall, please see below ‘Preparing Your LCD HDTV for Wall Mounting’ for additional information. Avoid installing the TV in places with high humidity, dust or smoke so as not to shorten the service life of the electronic components.

Install the TV in landscape orientation; any 90˚ clockwise or counter-clockwise installation may induce poor ventilation and excessive component damage.

VIZIO offers professional installation services. Please contact VIZIO for more information on these services at 888-VIZIOCE (888-849-4623) or www.VIZIO.com

Preparing Your LCD HDTV for Wall Mounting

The VIZIO VX37L can either be kept on the stand base or mounted on the wall for viewing. If you choose to mount the VX37L on the wall, please follow the instructions below for removing the stand base.

To remove the stand base

1. Unplug all of the cables and cords from your VX37L.

2. Place the VX37L face down on a soft and flat surface (blanket, foam, cloth, etc) to prevent any damage to the TV.

3. Remove the eight (8) screws holding the base to the VX37L.

4. Carefully remove the stand base.

To find the perfect mount for the VIZIO VX37L, browse VIZIO’s certified mount selection at

www.VIZIO.com

(888-849-4623).

or call directly 888-VIZIOCE

Version 1/25/2007 5

www.VIZIO.com

VIZIO VX37L HDTV10A User Manual

Table of Contents

Chapter 1 Basic Controls and Connections.................................................................. 8

1.1 Front Panel..........................................................................................................................................................8

1.2 Right Side Panel Controls ...................................................................................................................................8

1.3 Left Side Connections .........................................................................................................................................8

1.4 Rear Panel Connections .....................................................................................................................................9

1.5 VIZIO Remote Control.......................................................................................................................................10

1.5.1 Insertion of Batteries in the Remote Control ..............................................................................................12

1.5.2 Remote Control Range ..............................................................................................................................12

1.5.3 VIZIO Remote Control Precautions ...........................................................................................................12

Chapter 2 Connecting Equipment .................................................................................. 13

2.1 Which Video Connection Should I Use?............................................................................................................13

2.2 Connecting Your DVD Player............................................................................................................................14

2.2.1 Using HDMI ...............................................................................................................................................14

2.2.2 Using Component Video............................................................................................................................15

2.2.3 Using S-Video (AV1)..................................................................................................................................16

2.2.4 Using Composite (AV) Video .....................................................................................................................16

2.3 Connecting Your HDTV Set-Top Box ................................................................................................................17

2.3.1 Using HDMI ...............................................................................................................................................17

2.3.2 Using Component Video............................................................................................................................19

2.4 Connecting Your Basic Set-Top Box .................................................................................................................20

2.4.1 Using Composite Video .............................................................................................................................20

2.4.2 Using Coax (RF)........................................................................................................................................20

2.5 Connecting Your VCR or Video Camera ...........................................................................................................21

2.6 Connecting Coaxial (RF) ...................................................................................................................................21

2.6.1 Using Your Antenna or Digital Cable for DTV............................................................................................21

2.6.2 Using Your Antenna or Cable for TV .........................................................................................................22

2.6.3 Using the Antenna or Cable through your VCR .........................................................................................22

2.7 Connecting a PC Computer ..............................................................................................................................23

2.7.1 Preset PC Resolutions...............................................................................................................................23

Chapter 3 Setting Up to Watch Television................................................................... 24

3.1 Basic LCD HDTV Start Up ................................................................................................................................24

3.2 Using a PC ........................................................................................................................................................26

3.3 Watching a TV Program ....................................................................................................................................27

3.4 Adjusting Basic HDTV Settings .........................................................................................................................27

3.5 Program Information..........................................................................................................................................28

3.6 Information on HDTV Status .............................................................................................................................28

Chapter 4 Advanced Adjustment of HDTV...................................................................29

4.1 Using the On Screen Display (OSD) .................................................................................................................29

4.2 DTV / TV Input Picture Adjustment....................................................................................................................30

4.2.1 Picture Mode .............................................................................................................................................30

4.2.2 Backlight ....................................................................................................................................................30

4.2.3 Brightness..................................................................................................................................................31

4.2.4 Contrast .....................................................................................................................................................31

4.2.5 Color ..........................................................................................................................................................31

4.2.6 Tint.............................................................................................................................................................31

4.2.7 Sharpness .................................................................................................................................................32

4.2.8 Color Temperature.....................................................................................................................................32

4.2.9 Advanced Video ........................................................................................................................................33

4.3 DTV / TV Input Audio Adjustment......................................................................................................................34

4.3.1 Volume ......................................................................................................................................................34

4.3.2 Bass...........................................................................................................................................................34

4.3.3 Treble ........................................................................................................................................................34

4.3.4 Balance......................................................................................................................................................34

4.3.5 Surround....................................................................................................................................................35

4.3.6 Speakers ...................................................................................................................................................35

4.4 DTV / TV Tuner Setup.......................................................................................................................................35

4.4.1 Tuner Mode ...............................................................................................................................................35

4.4.2 Auto Search...............................................................................................................................................35

4.4.3 Skip Channel .............................................................................................................................................35

Version 1/25/2007 6

www.VIZIO.com

VIZIO VX37L HDTV10A User Manual

4.4.4 Time Zone .................................................................................................................................................36

4.4.5 Daylight Saving..........................................................................................................................................36

4.5 DTV / TV Input Setup ........................................................................................................................................36

4.5.1 Language...................................................................................................................................................36

4.5.2 Sleep Timer ...............................................................................................................................................36

4.5.3 Analog Closed Caption ..............................................................................................................................36

4.5.4 Digital Closed Caption ...............................................................................................................................36

4.5.5 Digital Closed Caption Style ......................................................................................................................37

4.5.6 Reset All Settings ......................................................................................................................................37

4.6 DTV / TV Input Parental Control........................................................................................................................38

4.6.1 Channel Block ...........................................................................................................................................38

4.6.2 TV Rating...................................................................................................................................................39

4.6.3 Movie Rating..............................................................................................................................................39

4.6.4 Blocked Unrated Programming..................................................................................................................40

4.6.5 Change the Password ...............................................................................................................................40

4.7 HDMI Input Picture Adjustment .........................................................................................................................41

4.8 HDMI Input Audio Adjustment ...........................................................................................................................41

4.9 HDMI Input Setup..............................................................................................................................................41

4.10 Video Input Picture Adjustment .......................................................................................................................42

4.11 Video Input Audio Adjustment .........................................................................................................................42

4.12 Video Input Setup............................................................................................................................................42

4.13 Video Input Parental Control ...........................................................................................................................43

4.14 PC Input Picture Adjustment ...........................................................................................................................43

4.14.1 Auto Adjust ..............................................................................................................................................43

4.14.2 Backlight ..................................................................................................................................................43

4.14.3 Brightness................................................................................................................................................43

4.14.4 Contrast ...................................................................................................................................................44

4.14.5 Color Temperature...................................................................................................................................44

4.14.6 H-SIZE.....................................................................................................................................................45

4.14.7 H. Position ...............................................................................................................................................45

4.14.8 V. Position ...............................................................................................................................................45

4.14.9 Fine Tune ................................................................................................................................................45

4.15 PC Input Audio Adjustment .............................................................................................................................45

4.16 PC Input Setup................................................................................................................................................45

4.17 Understanding Viewing Features ....................................................................................................................46

4.17.1 Viewing Modes ........................................................................................................................................46

4.17.2 Picture-In-Picture(PIP) Mode...................................................................................................................47

4.17.3 Adjusting Basic PIP Settings ...................................................................................................................47

4.17.4 Setting the Sleep Timer ...........................................................................................................................48

4.18 Using a Cable or Satellite Remote ..................................................................................................................48

Chapter 5 Maintenance and Troubleshooting............................................................. 49

5.1 Maintenance......................................................................................................................................................49

5.2 Troubleshooting Guide ......................................................................................................................................49

5.3 Telephone & Technical Support ........................................................................................................................51

5.4 Compliance .......................................................................................................................................................52

5.5 FCC Class B Radio Interference Statement......................................................................................................52

Chapter 6 Miscellaneous Information ........................................................................... 53

6.1 Specifications ....................................................................................................................................................53

6.2 Glossary – Standard Definitions ........................................................................................................................54

6.3 Index .................................................................................................................................................................55

6.4 Limited Product Warranty..................................................................................................................................57

6.4.1 VIZIO Extended Service Warranty.............................................................................................................57

Version 1/25/2007 7

www.VIZIO.com

VIZIO VX37L HDTV10A User Manual

Chapter 1 Basic Controls and Connections

1.1 Front Panel

Power ‘VIZIO’ light – The VIZIO name lights white when powered on and orange when powered off.

Remote Control Sensor – This is the window through which all of the remote control signals pass to the sensor. Point the remote control directly at this window for the best response to the remote signal.

1.2 Right Side Panel Controls

Power ( ) – Switch the VX37L on by pressing the

button once. Press the button again to the VX37L off. Menu – This button activates the On Screen Display (OSD).

If a sub-menu is active, pressing this button will return to the previous menu level.

Channel ▲/▼ – Use these buttons to step up or down the TV channels. While the OSD is active, these buttons function as up and down controls in the OSD menus.

Volume ◄/► – Use these buttons to increase or decrease to the speaker volume. While the OSD is active, these buttons function as left and right controls in the OSD menus.

Input (Enter) – Repeated pressing of this buttons steps through the input sources in the following sequence: TV, AV1 (S-Video or Video), AV2, Component 1, Component 2, HDMI 1, HDMI 2, and RGB. Once you have stepped through the entire sequence, you will return to the beginning.

Additionally, when the OSD is active, this button confirms the menu function to be adjusted. When the OSD is not active, pressing this button will display the current input mode.

1.3 Left Side Connections

1. AV1 In – Connect the primary source for composite

video devices, such as a VCR or video game. Use the white and red connectors to connect the external audio from the same source. The orange color band on the rear of the TV indicates this connection. The S-Video, if connected, will take priority over AV1 RCA connector.

Version 1/25/2007 8

www.VIZIO.com

VIZIO VX37L HDTV10A User Manual

1.4 Rear Panel Connections

1 2

1. AC IN – Plug-in the supplied AC Power Cord here.

2. SERVICE – This custom communication port is for factory service only.

3. HDMI 1 – Connect the primary source for digital video such as a DVD multimedia player or

set top box through this all digital connector. The white color band on the rear of the TV indicates this connection. Your VIZIO Certified HDMI cables are available for purchase from

www.VIZIO.com

4. HDMI 2 – Connect the secondary source for digital video such as a DVD multimedia player or

set top box through this all digital connector. The white color band on the rear of the TV indicates this connection. For users who want to connect to a DVI enabled device, use a DVI-HDMI cable and connect the Analog Audio output of the device to the L+R AUDIO here. . Your VIZIO Certified HDMI and HDMI-DVI cables are available for purchase from

www.VIZIO.com

5. RGB PC – Connect the video and audio from a computer here. The blue color band on the

rear of the TV indicates this connection.

6. COMPONENT 1 (YPb/CbPr/Cr with Audio L/R) – Connect the primary source for

component video devices such as a DVD Player or set top box here. From left to right, use green for Y, blue for Pb (or Cb), red for Pr (or Cr), white for left audio and red for right audio inputs. The green color band on the rear of the TV indicates this connection.

7. COMPONENT 2 (YPb/CbPr/Cr with Audio L/R) – Connect the secondary source for

component video devices such as a DVD Player or set top box here. From left to right, use green for Y, blue for Pb (or Cb), red for Pr (or Cr), white for left audio and red for right audio inputs. The purple color band on the rear of the TV indicates this connection.

8. AV2 In – Connect the secondary source for composite video devices, such as a VCR or

video game. Use the white and red connectors to connect the external audio from the same source. The orange color band on the rear of the TV indicates this connection.

9. DTV – Connect to an antenna or digital cable (out-of-the-wall, not from Cable Box) for Digital

TV.*

10. Audio Out – Connect the audio from the LCD HDTV to an external device, such as a home

theatre system, external amplifier or stereo. Speakers cannot be connected directly to here. The gray color band on the rear of the TV indicates this connection.

* For digital TV stations in your area visit www.antennaweb.org

or by calling 888-VIZIOCE (888-849-4623).

Version 1/25/2007 9

www.VIZIO.com

VIZIO VX37L HDTV10A User Manual

1.5 VIZIO Remote Control

Remote LED – Blinks when the remote operates. POWER – Press this button to turn the TV on from the Standby mode.

Press it again to return to the Standby mode. Number Button Pad – Use these buttons to select a channel or enter a

password.

INPUT – This button allows the user to cycle through the inputs.

- (Dash) – When selecting a digital channel directly use this button for the

separation of main and sub-channels. For example, channel 28-2 would be selected by the button sequence 2 8 ENTER 2.

CH (+ or -) – These buttons change the channels up or down. LAST – This button recalls the previously viewed channel. MUTE – This button turns the sound on and off. VOL (+ or -) – These

buttons turn the volume up or down.

MENU – Use this button for the On-Screen Display (OSD) menus. INFO – This button displays the image and system information display. GUIDE – This button displays program information. Note: this button is

only functional for DTV.

EXIT – This button exits the On-Screen Display (OSD) menus.

- These buttons navigate the On-Screen Display (OSD). OK – Use this button to select your chosen option in On-Screen Display

(OSD) menus.

NOTE: Your Remote Control may look like this.

Version 1/25/2007 10

www.VIZIO.com

VIZIO VX37L HDTV10A User Manual

WIDE – This button cycles through the available screen formats. The options for SD (Standard Definition 4:3) are Normal, Zoom and Panoramic. . The options for HD (High Definition 16:9) and RGB PC are Normal and Zoom.

SLEEP – This button allows the user to select the sleep options by adjusting the timer for 30, 60, 90 or 120 minutes.

MTS – This button will select the MTS options of Stereo, SAP or Mono in TV mode and alternate audio channels, where available, in DTV mode.

CC – This button will select the Closed Caption mode. The options are OFF, CC1, CC2, CC3 or CC4.

TV – Press this button to select TV. AV – Repeated pressing of this button with switch between AV-C

(Composite, yellow RCA) and AV-S (S-Video) inputs.

COMPONENT – Press this button to select the Component (YPbPr) input. HDMI – Press this button to select the HDMI input. ZOOM (- and +) – Use these buttons to increase or decrease the size of

the picture. Note that in the zoom mode parts of the picture will not be visible because they extend beyond the edges of the screen.

FREEZE – Press this button to “Freeze-Frame” the current screen. Press this button again the continue playing.

RGB – This button selects an RGB Analog component such as a PC. PIP – Use this button to activate the Picture-In-Picture mode. PIP CH (- and +) – These buttons are used to select the channels within

the PIP screen when DTV/TV is the PIP input selected. AUDIO – Press this button to switch the audio from the main screen to the

sub-screen while in PIP mode. PIP INPUT – Press the button to choose the PIP input. Note: The TV must

be in PIP mode for this button to be functional. For additional information regarding the PIP options, see section 4.17.2 - Picture-In-Picture (PIP) Mode, page 47.

PIP SIZE – Press this button to select the size of the PIP screen from one of the following: small, medium or large.

MODE – Use this button to change the picture mode from Custom, Standard, Movie and Game.

SWAP – Used to swap the inputs from the main screen and the sub-screen while in PIP mode.

Version 1/25/2007 11

www.VIZIO.com

VIZIO VX37L HDTV10A User Manual

1.5.1 Insertion of Batteries in the Remote Control

Insert two AA batteries into the remote control. Make sure that you match the (+) and (-) symbols on the batteries with the (+) and (-) symbols inside the battery compartment. Re-attach the battery cover.

Precautionary Tips for Inserting the Batteries:

Only use the specified AA batteries. Do not mix new and old batteries. This may result in cracking or leakage

that may pose a fire risk or lead to personal injury. Inserting the batteries incorrectly may also result in cracking or leakage

that may pose a fire risk or lead to personal injury. Dispose of the batteries in accordance with local laws and regulations. Keep the batteries away form children and pets.

1.5.2 Remote Control Range

Point the remote control at the remote control sensor to transmit the commands. Do not place any obstacles between the remote control and the receiver window. The effective range of the remote control is approximately 30 feet (10 meters) from the front of the

receiver window, 30° to the left and right, 20° up and down.

1.5.3 VIZIO Remote Control Precautions

The remote control should be kept dry and away from heat sources. Avoid humidity. If the TV responds erratically to the remote control or does respond at all, check the batteries. If the

batteries are low or exhausted, replace them with fresh batteries. When not using the remote control for a long period of time, remove the batteries. Do not take the batteries apart, heat them, or throw them into a fire. Do not subject the remote control to undue physical stress, such as striking or dropping it. Do not attempt to clean the remote control with a volatile solvent. Wipe it with a clean, damp cloth.

Version 1/25/2007 12

www.VIZIO.com

VIZIO VX37L HDTV10A User Manual

Chapter 2 Connecting Equipment

2.1 Which Video Connection Should I Use?

The VIZIO VX37L has six different ways to connect your video equipment from a basic connection to the most advanced for digital displays.

Rear

Connection

Quality (type)

Connector

Panel Color

Codes

Description

Best

(digital)

Best

(digital)

- - - - - - - - - - - Good

(analog)

Best

(analog)

Better

(analog)

White

Black

Blue

Green

and

Purple

HDMI (High-Definition Multimedia Interface) - It is the first and only industry-supported, uncompressed, all-digital audio/video interface. HDMI provides an interface between any audio/video source, such as a set-top box, DVD player, or A/V receiver and an audio and/or video monitor, such as a digital television (DTV), over a single cable.

DTV Coaxial RF. When used for MPEG2 encoded bit streams from ATSC broadcast programming, this input takes advantage of the High Definition content.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

TV Coaxial RF. This is the connection for standard NTSC TV using antenna or cable.

RGB PC (VGA) – This video input has separate red, green and blue color components. The signal carries horizontal and vertical sync information on the green signal. This is most commonly used for PC input.

Component - The video signal is separated into three signals, one containing the black-and-white information and the other two containing the color information. This enhancement over S-Video takes advantage of the superior picture provided by progressive scan DVD players and HDTV formats.

S-Video (AV1) - The video signal is separated into two signals, one containing the black-and-white information and the other containing the color information. Separating the color in this way avoids ‘cross color’ effects where closely spaced black and white lines are erroneously displayed in color. It also enables text to be displayed more sharply.

Composite (AV1/2) - The complete video signal is carried through this single pin connector. This is the most commonly used video connection.

Good

(analog)

Good

(analog)

Red

Yellow

and

Orange

Note: For more info refer to the Quick Start Guide

Version 1/25/2007 13

www.VIZIO.com

VIZIO VX37L HDTV10A User Manual

2.2 Connecting Your DVD Player

You have several options for connecting your DVD player to your VX37L; HDMI, Component, AV (SVideo or Composite) inputs. Based on your configuration, you can decide which option is right for you.

2.2.1 Using HDMI

DVD players that have a digital interface such as HDMI (High Definition Multimedia Interface) should be connected to the HDMI input of the VIZIO VX37L for optimal results.

Note: To maintain the display quality, use a VIZIO certified HDMI cable available up to 10 meters. See www.VIZIO.com

Connecting your DVD Player (Best):

1. Turn off the power to the HDTV and DVD player.

2. Connect a HDMI cable to the HDMI output of your DVD player and the other end to

3. Turn on the power to the HDTV and DVD player.

4. Select HDMI using the INPUT button on the remote or side of the HDTV, or directly

For DVD Players with DVI:

or call 1-888-VIZIOCE (1-888-849-4623) for details.

the HDMI Input (white color area) at the rear of the HDTV.

by pressing the HDMI button on the Remote Control.

1. Turn off the HDTV and DVD player.

2. Using a HDMI-DVI cable, connect the DVI end to your DVD player and the HDMI end to the HDMI Input (white color area) at the rear of the HDTV.

3. Connect an audio cable (white and red connectors) to the audio output connectors associated with the DVI output of the DVD player and connect the other end to the audio connectors by the HDMI input (white area) at the rear of the HDTV.

4. Turn on the power to the HDTV and your DVD player.

5. Select HDMI using the INPUT button on the remote or side of the HDTV, or directly by pressing the HDMI button on the Remote.

Note: Refer to your DVD player user manual for more information about the video output requirements of the product.

Version 1/25/2007 14

www.VIZIO.com

VIZIO VX37L HDTV10A User Manual

2.2.2 Using Component Video

Connecting your DVD Player (Better):

1. Turn off the power to the HDTV and DVD player.

2. Connect the Y (green color) connector on your DVD player to the corresponding Y (green color) connector in the Component 1 group (green color area - row of connectors nearest to you when viewing from the rear of the TV) at the rear of the HDTV.

3. Connect the Pb (blue color) connector on your DVD player to the corresponding Pb (blue color) connector in the Component 1 group (green color area - row of connectors nearest to you when viewing from the rear of the TV) at the rear of the HDTV.

4. Connect the Pr (red color) connector on your DVD player to the corresponding Pr (red color) connector in the Component 1 group (green color area - row of connectors nearest to you when viewing from the rear of the TV) at the rear of the HDTV.

5. Using an audio cable (white and red connectors), connect the cable to the audio output connectors associated with the Component output on your DVD player and connect the other end to the audio connectors associated with the Component 1 input (green color area) at the rear of the HDTV.

6. Turn on the power to the HDTV and DVD player.

7. Select Component using the INPUT button on the remote or side of the HDTV, or directly by pressing the Component button on the Remote Control.

Note: Refer to your DVD player user manual for more information about the video output requirements of the product.

Version 1/25/2007 15

www.VIZIO.com

VIZIO VX37L HDTV10A User Manual

2.2.3 Using S-Video (AV1)

Connecting your DVD Player (Good):

1. Turn off the power to the HDTV and DVD player.

2. Connect the S-Video jack on the rear of your DVD player to the S-Video jack in the AV1 group on the side of the HDTV.

3. Connect an audio cable (white and red connectors) to the audio output connectors associated with the S-Video output on your DVD player and connect the other end to the audio connectors associated with the AV1 input on the side of the HDTV.

4. Turn on the power to the HDTV and DVD player.

5. Select AV1 using the INPUT button on the remote or side of the HDTV, or directly by pressing the AV button on the Remote Control.

2.2.4 Using Composite (AV) Video

Connecting your DVD Player (Good) :

1. Turn off the power to the HDTV and DVD player.

2. Connect the Video (yellow color) connector on your DVD player to the Video (yellow color) connector in the AV2 group (yellow color area).

3. Connect the R (red color) and L (white color) audio connectors on your DVD player to the corresponding R (red color) and L (white color) audio input connectors in the AV2 group (yellow color area).

4. Turn on the power to the HDTV and DVD Player.

5. Select AV2 using the INPUT button on the remote or side of the HDTV, or directly by pressing the AV button on the Remote Control.

Note:

a) You may use the AV1 input on the side if you wish, as long

as you are not already using it for the S-Video input.

b) Refer to your DVD player user manual for more information

about the video output requirements of the product.

Version 1/25/2007 16

www.VIZIO.com

VIZIO VX37L HDTV10A User Manual

2.3 Connecting Your HDTV Set-Top Box

2.3.1 Using HDMI

HDTV Set-Top Boxes that have a HDMI digital interface should be connected to the HDMI input of the LCD HDTV for optimal results.

Connecting your HDTV Set-Top Box (Best):

Note: To maintain the display quality, use a VIZIO certified HDMI cable that is 10 meters. See www.VIZIO.com or call 1-888-VIZIOCE (1-888-849-4623) for details.

1. Turn off the power to the HDTV and HDTV Set-Top Box.

2. Connect a HDMI cable to the HDMI output of your HDTV Set-Top Box and the other end to the HDMI Input (white color area) at the rear of the HDTV.

3. Turn on the power to the HDTV and HDTV Set-Top Box.

4. Select HDMI using the INPUT button on the remote or side of the HDTV, or directly by pressing the HDMI button on the Remote Control.

Note:

a) The HDMI input on the HDTV supports High-bandwidth Digital Content Protection

(HDCP). HDCP encrypts the transmission between the video source and the digital display for added security and protection.

b) Refer to your HDTV Set-Top Box user manual for more information about the

video output requirements of the product or consult your cable or satellite operator.

Version 1/25/2007 17

www.VIZIO.com

VIZIO VX37L HDTV10A User Manual

For HDTV Set-Top Boxes with DVI:

1. Turn off the power to the HDTV and HDTV Set-Top Box.

2. Using a HDMI-DVI cable, connect the DVI end to your HDTV Set-Top Box and the HDMI end to the HDMI Input (white color area) at the rear of the HDTV.

3. Using an audio cable (white and red connectors), connect the cable to the audio output connectors associated with the DVI output on your HDTV Set-Top Box and connect the other end to the audio connectors associated with the HDMI input (white area) at the rear of the HDTV.

4. Turn on the power to the HDTV and HDTV Set-Top Box.

5. Select HDMI using the INPUT button on the remote or side of the HDTV, or directly by pressing the HDMI button on the Remote Control.

Note: The HDMI Input is for HD Video and will only support 640x480 at 60Hz from a PC. Use the RGB PC input for a greater selection of PC formats.

Note:

a) The HDMI input on the HDTV supports High-bandwidth Digital Content Protection

(HDCP). HDCP encrypts the transmission between the video source and the digital display for added security and protection.

b) Refer to your HDTV Set-Top Box user manual for more information about the

video output requirements of the product or consult your cable or satellite operator.

Version 1/25/2007 18

www.VIZIO.com

+ 39 hidden pages