Vizio VX37LHDTV10A Owner’s Manual

VlZtO VX37L HDTV10A User Manual
Dear VlZlO Customer,
Congratulations on your new VlZtO VX37L High
Definition LCD Television purchase. Thank you
for your support. For maximum benefit of your set, please read these instructions before making any
adjustments, and retain them for future reference. We hope you will experience many years of
enjoyment from your new VlZlO VX37L High
For assistance, please call 714-668-0588 or e-
mail us at techsupport@vinc.com.
To purchase or inquire about accessories and installation services for your VlZlO LCD HDTV,
please visit our website at www.VlZlO.com or call toll free at 888-VlZIOCE (888-849-4623).
We recommend you register your VlZlO VX37L
HDTVl0A either at our website www.VlZlO.com
or fill in your registration card and mail it in. For peace of mind and to protect your investment
beyond the standard warranty, VlZlO offers on- site extended warranty service plans. These
plans give additional coverage during the standard warranty period. Visit our website or call
us to purchase a plan. Write down the serial number located on the back
of your VX37L.
Purchase Date
VlZlO is a registered trademark of V, Inc.
HDMI logo and "High Definition Multimedia Interface" are registered trademarks of HDMI Licensing LLC.
Version 1/25/2007 1
www,VlZlO,com
VlZtOVX37LHDTV10AUserManual
THIS PRODUCT HAS BEEN DESIGNED AND TESTED FOR COMPLIANCE WITH REGULATORY SAFETY CERTIFICATIONS
This product is designed and manufactured to operate within defined design limits, and misuse may result in electric
shock or fire. To prevent the product from being damaged, the following rules should be observed for the installation, use and maintenance of the product. Read the following safety instructions before operating the display. Keep these
instructions in a safe place for future reference.
To avoid the risk of electric shock or component damage, switch off the power before connecting other components to the VX37L LCD HDTV.
Unplug the power cord before cleaning the VX37L LCD HDTV. A damp cloth is sufficient for cleaning the VX37L LCD HDTV. Do not use a liquid or a spray cleaner for cleaning the product. Do not use abrasive cleaners.
Always use the accessories recommended by the manufacturer to insure compatibility.
When moving the VX37L LCD HDTV from an area of low temperature to an area of high temperature, condensation may form on the housing. Do not turn on the VX37L LCD HDTV immediately after this to avoid causing fire, electric shock or component damage.
Do not place the VX37L LCD HDTV on an unstable cart, stand, or table. If the VX37L LCD HDTV falls, it can injure a person and cause
serious damage to the appliance. Use only a cart or stand recommended by the manufacturer or sold with the VX37L LCD HDTV.
A distance of at least 3 feet should be maintained between the VX37L LCD HDTV and any heat source, i.e. radiator, heater, oven,
amplifier etc. Do not install the product close to smoke. Operating the product close to smoke or moisture may cause fire or electric shock.
Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable operation of the VX37L LCD HDTV and to protect it from overheating, be sure these openings are not blocked or covered. Do not place the VX37L LCD HDTV in a bookcase or cabinet unless proper ventilation is provided.
Never push any object into the slot on the VX37L LCD HDTV cabinet. Do not place any objects on the top of the product. It could short
circuit parts causing a fire or electric shock. Never spill liquids on the VX37L LCD HDTV.
The VX37L LCD HDTV should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.
The power cable must be replaced when using different voltage from that specified in the User Manual. For more information, contact
your dealer.
The VX37L LCD HDTV is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug will fit only into a grounded power outlet as a safety feature. If your outlet does not accommodate the three-wire plug, have an electrician install
the correct outlet, or use an adapter to ground the appliance safely. Do not defeat the safety purpose of the
grounded plug.
Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
The wal! socket shall be installed near the equipment and shall be easily accessible.
Only the marked power source can be used for the product. Any power source other than the specified one may cause fire or electric
shock.
Do not touch the power cord during lightning. To avoid electric shock, avoid handling the power cord during electrical storms.
Unplug the unit during a lightening storm or when it will not be used for long period of time. This will protect the VX37L LCD HDTV from
damage due to power surges.
Do not attempt to repair or service the product yourself. Opening or removing the back cover may expose you to high voltages, the risk
of electric shock, and other hazards. If repair is required, please contact your dealer and refer all servicing to qualified service
personnel.
Keep the product away from moisture. Do not expose this appliance to rain or moisture. If water penetrates into the product, unplug
the power cord and contact your dealer. Continuous use in this case may result in fire or electric shock.
Do not use the product if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord and contact your
dealer immediately. Do not try to repair the product yourself.
Avoid using dropped or damaged appliances. If the product is dropped and the housing is damaged, the internal components may
function abnormally. Unplug the power cord immediately and contact your dealer for repair. Continued use of the product may cause fire or electric shock.
Do not install the product in an area with heavy dust or high humidity. Operating the product in environments with heavy dust or high humidity may cause fire or electric shock.
Follow instructions for moving the product. Ensure that the power connector and any other cables are unplugged before moving the product.
Hold the power connector when removing the power cable. Pulling the power cable itself may damage the wires inside the cable and
cause fire or etectric shock. When the product wilt not be used for an extended period of time, unplug the power connector.
To avoid risk of electric shock, do not touch the connector with wet hands.
Insert batteries in accordance with instructions. Incorrect polarities may cause damage and leakage of the batteries, operator injury
and contamination the remote controller.
If any of the following occurs please contact the dealer:
o The power connector fails or frays. o Liquid sprays or any object drops into the VX37L LCD HDTV.
o The Display is exposed to rain or other moisture. o The Display is dropped or damaged in any way.
o The performance of the Display changes substantially.
Version 1/25/2007 2
www.VlZlO.com
VlZlOVX37LHDTV10AUserManual
TeLevision Antenna Connection Protection
External TeLevision Antenna Groundinq
If an outside antenna/satellite dish or cable system is to be connected to the TV, make sure that the antenna or cable system is electrically grounded to provide some protection against voltage surges and
static charges.
Article 810 of the National Electrical Code, ANSt/NFPSA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge
unit, size of the grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements of the grounding electrode.
Lightning Protection For added protection of the TV during a lightning storm or when it is left unattended or unused for long
periods of time, unplug the TV from the wall outlet and disconnect the antenna or cable system.
Power Lines
Do not locate the antenna near overhead light or power circuits, or where it could fall into such power lines or circuits.
Remember, the screen of the coaxial cable is intended to be connected to earth in the building installation.
Version 1/25/2007 3
www.VlZlO.com
VlZtOVX37LHDTV10AUserManual
Openinq the PBokBqe
Your VlZIO VX37L HDTVl0A and it accompanying accessories are carefully packed in a cardboard carton that has been designed to protect it from transportation damage. Now you have opened the carton
check that the VX37L HDTVl0A is in good condition and that all of the accessories are included. The VX37L HDTVl0A weighs approximately 441b and is over 36" wide; we advise that you have at least 2
people to unpack and install the HDTV. The screen can easily be scratched or broken so please handle the product gently and never place the
HDTV with the glass facing downwards on a surface without protective padding.
IMPORTANT: Save the carton and packing material for future shipping.
PBokBqe Contents
VlZtO VX37L HDTVl0A VlZtO Remote Control
AV Cable (Yellow, Red and White Connectors) Power Cord
VlZIO Bezel and Screen Cleaning Cloth This User Manual
Quick Setup Guide Registration Card
VlP Services Brochure
Certified Rccessories
VX37L HDTVloR 8re sold sepsrsteLv
Wall Mounts High Definition Cables Extra or replacement Remote
VlZtO also offers Installation Services and Extended Warranty Services for your VlZtO VX37L HDTV10A
To purchase or inquire about additional accessories and services for your VlZlO product, visit our web site at www.VlZIO.com or call us toll free at 888-VlZtOCE (888-849-4623)
Version 1/25/2007 4
www.VlZlO.com
VlZtOVX37LHDTV10AUserManual
InstaLLation Preparation
Please read this user manual carefully before installing your VlZtO HDTV. The power consumption of the TV is about 210W, please use the power cord designated for TV. When
an extension cord is required, use one with the correct power rating. The cord must be grounded and the grounding feature must not be defeated.
The TV should be installed on a flat surface to avoid tipping. For proper ventilation, you must allow space between the back of the TV and the wall. tf you would like to mount your TV on the wall, please see
below 'Preparing Your LCD HDTV for Wall Mounting' for additional information. Avoid installing the TV in places with high humidity, dust or smoke so as not to shorten the service life of the electronic components.
Install the TV in landscape orientation; any 90 ° clockwise or counter-clockwise installation may induce poor ventilation and excessive component damage.
VlZlO offers professional installation services. Please contact VlZtO for more information on these services at 888-VlZlOCE (888-849-4623) or www.VlZlO.com.
Preparinq Your LCD HDTW WaLL Mountinq
The VlZlO VX37L can either be kept on the stand base or mounted on the wall for viewing. If you choose to mount the VX37L on the wall, please follow the instructions below for removing the stand base.
To remove the sband base
1. Unplug all of the cables and cords from your VX37L.
2. Place the VX37L face down on a soft and flat surface (blanket, foam, cloth,
etc) to prevent any damage to the TV.
3. Remove the eight (8) screws holding the base to the VX37L.
4. Carefully remove the stand base.
To find the perfect mount for the VlZlO VX37L, browse VlZlO's certified mount selection at
www.VlZlO.com or call directly 888-VlZlOCE (888-849-4623).
Version 1/25/2007 5
www.VlZlO.com
VlZlOVX37LHDTV10AUserManual
Tabke of Contents
Chapter 1 Basic G©ntrol.s and Connections .................................................................. 8
1.1 Front Panel .......................................................................................................................................................... 8
1.2 Right Side Panel Controls ................................................................................................................................... 8
1.3 Left Side Connections ......................................................................................................................................... 8
1.4 Rear Panel Connections ..................................................................................................................................... 9
1.5 VlZlO Remote Control ....................................................................................................................................... 10
1.5.1 Insertion of Batteries in the Remote Control .............................................................................................. 12
1.5.2 Remote Control Range .............................................................................................................................. 12
1.5.3 VlZlO Remote Control Precautions ........................................................................................................... 12
Chapter 2 Eonnectinq Equipment ..................................................................................s3
2.1 Which Video Connection Should IUse? ............................................................................................................ 13
2.2 Connecting Your DVD Player ............................................................................................................................ 14
2.2.1 Using HDMI ............................................................................................................................................... 14
2.2.2 Using Component Video ............................................................................................................................ 15
2.2.3 Using S-Video (AVl) .................................................................................................................................. 16
2.2.4 Using Composite (AV)Video ..................................................................................................................... 16
2.3 Connecting Your HDTV Set-Top Box ................................................................................................................ 17
2.3.1 Using HDMI ............................................................................................................................................... 17
2.3.2 Using Component Video ............................................................................................................................ 19
2.4 Connecting Your Basic Set-Top Box ................................................................................................................. 20
2.4.1 Using Composite Video ............................................................................................................................. 20
2.4.2 Using Coax (RF) ........................................................................................................................................ 20
2.5 Connecting Your VCR or Video Camera ........................................................................................................... 21
2.6 Connecting Coaxial (RF) ................................................................................................................................... 21
2.6.1 Using Your Antenna or Digital Cable for DTV ............................................................................................ 21
2.6.2 Using Your Antenna or Cable for TV ......................................................................................................... 22
2.6.3 Using the Antenna or Cable through your VCR ......................................................................................... 22
2.7 Connecting a PC Computer .............................................................................................................................. 23
2.7.1 Preset PC Resolutions ............................................................................................................................... 23
Chapter 3 Settinq Up to Watch Te[evisbn ..................................................................._A
3.1 Basic LCD HDTV StartUp ................................................................................................................................24
3.2 Using a PC ........................................................................................................................................................26
3.3 Watching a TV Program ....................................................................................................................................27
3.4 Adjusting Basic HDTV Settings .........................................................................................................................27
3.5 Program Information..........................................................................................................................................28
3.6 Information on HDTV Status .............................................................................................................................28
Oqapter _ Rdvanced Rdoustment off HDTV ...................................................................2q
4.1 Using the On Screen Display (OSD) .................................................................................................................29
4.2 DTV /TV Input PictureAdjustment ....................................................................................................................30
4.2.1 PictureMode .............................................................................................................................................30
4.2.2 BackIight....................................................................................................................................................30
4.2.3 Brightness..................................................................................................................................................31
4.2.4Contrast .....................................................................................................................................................31
4.2.5Color ..........................................................................................................................................................31
4.2.6Tint.............................................................................................................................................................31
4.2.7Sharpness .................................................................................................................................................32
4.2.8Color Temperature .....................................................................................................................................32
4.2.9Advanced Video ........................................................................................................................................33
4.3 DTV /TV Input Audio Adjustment ......................................................................................................................34
4.3.1Volume ......................................................................................................................................................34
4.3.2 Bass ........................................................................................................................................................... 34
4.3.3 Treble ........................................................................................................................................................ 34
4.3.4 Balance ...................................................................................................................................................... 34
4.3.5 Surround .................................................................................................................................................... 35
4.3.6 Speakers ................................................................................................................................................... 35
4.4 DTV 1TV Tuner Setup ....................................................................................................................................... 35
4.4.1 Tuner Mode ............................................................................................................................................... 35
4.4.2 Auto Search ............................................................................................................................................... 35
4.4.3 Skip Channel ............................................................................................................................................. 35
Version 1/25/2007 6
www.VlZlO.com
VlZtOVX37LHDTV10AUserManual
4.4.4 Time Zone ................................................................................................................................................. 36
4.4.5 Daylight Saving .......................................................................................................................................... 36
4.5 DTV / TV Input Setup ........................................................................................................................................ 36
4.5.1 Language ................................................................................................................................................... 36
4.5.2 Sleep Timer ............................................................................................................................................... 36
4.5.3 Analog Closed Caption .............................................................................................................................. 36
4.5.4 Digital Closed Caption ............................................................................................................................... 36
4.5.5 Digital Closed Caption Style ...................................................................................................................... 37
4.5.6 Reset All Settings ...................................................................................................................................... 37
4.6 DTV / TV Input Parental Control ........................................................................................................................ 38
4.6.1 Channel Block ........................................................................................................................................... 38
4.6.2 TV Rating ................................................................................................................................................... 39
4.6.3 Movie Rating .............................................................................................................................................. 39
4.6.4 Blocked Unrated Programming .................................................................................................................. 40
4.6.5 Change the Password ............................................................................................................................... 40
4.7 HDMI Input Picture Adjustment ......................................................................................................................... 41
4.8 HDMI Input Audio Adjustment ........................................................................................................................... 41
4.9 HDMI Input Setup .............................................................................................................................................. 41
4.10 Video input Picture Adjustment ....................................................................................................................... 42
4.11 Video input Audio Adjustment ......................................................................................................................... 42
4.12 Video input Setup ............................................................................................................................................ 42
4.13 Video input Parental Control ........................................................................................................................... 43
4.14 PC Input Picture Adjustment ........................................................................................................................... 43
4.14.1 Auto Adjust .............................................................................................................................................. 43
4.14.2 Backlight .................................................................................................................................................. 43
4.14.3 Brightness ................................................................................................................................................ 43
4.14.4 Contrast ................................................................................................................................................... 44
4.14.5 Color Temperature ................................................................................................................................... 44
4.14.6 H-SIZE ..................................................................................................................................................... 45
4.14.7 H. Position ............................................................................................................................................... 45
4.14.8 V. Position ............................................................................................................................................... 45
4.14.9 Fine Tune ................................................................................................................................................ 45
4.15 PC Input Audio Adjustment ............................................................................................................................. 45
4.16 PC Input Setup ................................................................................................................................................ 45
4.17 Understanding Viewing Features .................................................................................................................... 46
4.17.1 Viewing Modes ........................................................................................................................................ 46
4.17.2 Picture-In-Picture(PIP) Mode ................................................................................................................... 47
4.17.3 Adjusting Basic PIP Settings ................................................................................................................... 47
4.17.4 Setting the Sleep Timer ........................................................................................................................... 48
4.18 Using a Cable or Satellite Remote .................................................................................................................. 48
Chapter S Ma_n_er_ance and 'Troub[eshoo_inq ............................................................. 4q
5.1 Maintenance ...................................................................................................................................................... 49
5.2 Troubleshooting Guide ...................................................................................................................................... 49
5.3 Telephone & Technical Support ........................................................................................................................ 51
5.4 Compliance ....................................................................................................................................................... 52
5.5 FCC Class B Radio Interference Statement ...................................................................................................... 52
Ehapter 5 MIsoe_.[ameous _mff©rma_i©m ...........................................................................$3
6.1 Specifications .................................................................................................................................................... 53
6.2 Glossary - Standard Definitions ........................................................................................................................ 54
6.3 Index ................................................................................................................................................................. 55
6.4 Limited Product Warranty .................................................................................................................................. 57
6.4,1 VlZIO Extended Service Warranty ............................................................................................................. 57
Version 1/25/2007 7
www.VlZlO.com
VlZtOVX37LHDTV10AUserManual
Chapter 1 Basic ControLs and Connections
1.1 Front Panel
Power 'VlZlO' light - The VtZlO name lights white when powered on and orange when powered off.
Remote Control Sensor - This is the window through which all of the remote control signals pass to the sensor. Point the
remote control directly at this window for the best response to the remote signal.
1,s Ri@ht Side Panel Eontrots
Power ( _ ) - Switch the VX37L on by pressing the button once. Press the button again to the VX37L off.
Menu - This button activates the On Screen Display (OSD). If a sub-menu is active, pressing this button will return to
the previous menu level. Channel A/T - Use these buttons to step up or down the
TV channels. While the OSD is active, these buttons function as up and down controls in the OSD menus.
Volume </1_ - Use these buttons to increase or decrease to the speaker volume. While the OSD is active, these
buttons function as left and right controls in the OSD menus. Input (Enter) - Repeated pressing of this buttons steps
through the input sources in the following sequence: TV, AV1 (S-Video or Video), AV2, Component 1, Component 2,
HDMI 1, HDMI 2, and RGB. Once you have stepped through the entire sequence, you will return to the
beginning. Additionally, when the OSD is active, this button confirms
the menu function to be adjusted. When the OSD is not active, pressing this button will display the current input
mode.
@
_t_u
OH÷
C_4_
VOL ÷
_HP_JT
z.3 Left Side Connections
I.
Version 1/25/2007 8
AVl In - Connect the primary source for composite video devices, such as a VCR or video game. Use
the white and red connectors to connect the external audio from the same source. The orange
color band on the rear of the TV indicates this connection. The S-Video, if connected, will take
priority over AVl RCA connector.
www.VlZlO.com
i,Q Ream Panel Oonneotions
VlZtOVX37LHDTV10AUserManual
I.
2.
3.
.
.
6.
.
.
.
10.
AC IN - Plug-in the supplied AC Power Cord here. SERVICE - This custom communication port is for factory service only.
HDMI 1 - Connect the primary source for digital video such as a DVD multimedia player or set top box through this all digital connector. The white color band on the rear of the TV indicates this connection. Your VlZtO Certified HDMI cables are available for purchase from
www.VlZIO.com or by calling 888-VlZlOCE (888-849-4623).
HDMI 2 - Connect the secondary source for digital video such as a DVD multimedia player or
set top box through this all digital connector. The white color band on the rear of the TV indicates this connection. For users who want to connect to a DVt enabled device, use a
DVI-HDMI cable and connect the Analog Audio output of the device to the L+R AUDIO here.. Your VIZlO Certified HDMI and HDMI-DVl cables are available for purchase from
www.VlZIO.com or by calling 888-VtZlOCE (888-849-4623).
RGB PC - Connect the video and audio from a computer here. The blue color band on the
rear of the TV indicates this connection. COMPONENT 1 (YPb/CbPr/Cr with Audio L/R) - Connect the primary source for
component video devices such as a DVD Player or set top box here. From left to right, use green for Y, blue for Pb (or Cb), red for Pr (or Cr), white for left audio and red for right audio
inputs. The green color band on the rear of the TV indicates this connection. COMPONENT 2 (YPb/CbPdCr with Audio L/R) - Connect the secondary source for
component video devices such as a DVD Player or set top box here. From left to right, use green for Y, blue for Pb (or Cb), red for Pr (or Cr), white for left audio and red for right audio
inputs. The purple color band on the rear of the TV indicates this connection. AV2 In - Connect the secondary source for composite video devices, such as a VCR or
video game. Use the white and red connectors to connect the external audio from the same source. The orange color band on the rear of the TV indicates this connection.
DTV - Connect to an antenna or digital cable (out-of-the-wall, not from Cable Box) for Digital
TV.* Audio Out - Connect the audio from the LCD HDTV to an external device, such as a home
theatre system, external amplifier or stereo. Speakers cannot be connected directly to here. The gray color band on the rear of the TV indicates this connection.
* For digital
TV stations in your area visit www.antennaweb.orq.
Version 1/25/2007 9
www.VlZlO.com
VlZtOVX37LHDTV10AUserManual
i0S WIZIO Remote Controt
Remote LED - Blinks when the remote operates. POWER - Press this button to turn the TV on from the Standby mode.
Press it again to return to the Standby mode. Number Button Pad - Use these buttons to select a channel or enter a password.
INPUT - This button allows the user to cycle through the inputs.
- (Dash) - When selecting a digital channel directly use this button for the separation of main and sub-channels. For example, channel 28-2 would
be selected by the button sequence 2 8 ENTER 2. CH (+ or -) - These buttons change the channels up or down.
LAST - This button recalls the previously viewed channel. MUTE - This button turns the sound on and off. VOL (+ or -) - These
buttons turn the volume up or down. MENU - Use this button for the On-Screen Display (OSD) menus.
INFO - This button displays the image and system information display. GUIDE - This button displays program information. Noo his buoy is
ory _ncliona D_V EXIT - This button exits the On-Screen Display (OSD) menus.
wa
OK - Use this button to select your chosen option in On-Screen Display (OSD) menus.
D _ - These buttons navigate the On-Screen Display (OSD).
look Uke bhis0
Version 1/25/2007 10
www.VlZlO.com
VlZtO VX37L HDTV10A User Manual
WIDE - This button cycles through the available screen formats. The options for SD (Standard Definition 4:3) are Normal, Zoom and Panoramic.. The options for HD (High Definition 16:9) and RGB PC are
Normal and Zoom. SLEEP - This button allows the user to select the sleep options by
adjusting the timer for 30, 60, 90 or 120 minutes. MTS - This button will select the MTS options of Stereo, SAP or Mono in
TV mode and alternate audio channels, where available, in DTV mode. CC - This button will select the Closed Caption mode. The options are
OFF, CC1, CC2, CC3 or CC4. TV - Press this button to select TV.
AV - Repeated pressing of this button with switch between AV-C (Composite, yellow RCA) and AV-S (S-Video) inputs.
COMPONENT - Press this button to select the Component (YPbPr) input. HDMI - Press this button to select the HDMI input. ZOOM (- and +) - Use these buttons to increase or decrease the size of
the picture. Note that in the zoom mode parts of the picture will not be visible because they extend beyond the edges of the screen.
FREEZE - Press this button to "Freeze-Frame" the current screen. Press this button again the continue playing.
RGB - This button selects an RGB Analog component such as a PC. PIP - Use this button to activate the Picture-In-Picture mode.
PIP CH (- and +) - These buttons are used to select the channels within the PIP screen when DTV/TV is the PIP input selected.
AUDIO - Press this button to switch the audio from the main screen to the sub-screen while in PIP mode.
PIP INPUT- Press the button to choose the PIP input. No :/°he TV mus be in P mode [x_ lis b on o be uncliona ol addiliona iMx£ms ion
regarding he PP options see seclion 4.17.2 ....Piclule_ Piclule (PP)
Mode page 47 PIP SIZE - Press this button to select the size of the PIP screen from one of the following: small, medium or large.
MODE - Use this button to change the picture mode from Custom, Standard, Movie and Game.
SWAP - Used to swap the inputs from the main screen and the sub-screen while in PIP mode.
Version 1/25/2007 11
www.VlZlO.com
VtZtO VX37L HDTV10A User Manual
1°Sol Mnsertion o_ Batteries in the Remote Control
Insert two AA batteries into the remote control. Make sure that you match the (+) and (-) symbols on the batteries with the (+) and (-) symbols inside the battery compartment. Re-attach the battery cover.
Precautionary Tips for Inserting the Batteries:
Only use the specified AA batteries. Do not mix new and old batteries. This may result in cracking or leakage
that may pose a fire risk or lead to personal injury. Inserting the batteries incorrectly may also result in cracking or leakage
that may pose a fire risk or lead to personal injury. Dispose of the batteries in accordance with local laws and regulations.
Keep the batteries away form children and pets.
IoSo_ Remote Control Range
Point the remote control at the remote control sensor to transmit the commands. Do not place any obstacles between the remote control and the receiver window.
The effective range of the remote control is approximately 30 feet (10 meters) from the front of the receiver window, 30° to the left and right, 20 ° up and down.
loSo3 VISO Remote Control Precautions
The remote control should be kept dry and away from heat sources. Avoid humidity. If the TV responds erratically to the remote control or does respond at all, check the batteries. If the
batteries are low or exhausted, replace them with fresh batteries. When not using the remote control for a long period of time, remove the batteries.
Do not take the batteries apart, heat them, or throw them into a fire. Do not subject the remote control to undue physical stress, such as striking or dropping it.
Do not attempt to clean the remote control with a volatile solvent. Wipe it with a clean, damp cloth.
Version 1/25/2007 12
www.VlZlO.com
VlZlOVX37LHDTV10AUserManual
Chapter 2 Connectinq Equipment
a°i Which Video Connection Should I Use?
The VlZlO VX37L has six different ways to connect your video equipment from a basic connection to the most advanced for digital displays.
HDMI (High-Definition Multimedia Interface) - It is the first and only industry-supported, uncompressed,
Best
(digital)
White
all-digital audio/video interface. HDMI provides an interface between any audio/video source, such as a set-top box, DVD player, or A/V receiver and an audio and/or video monitor, such as a digital
television (DTV), over a single cable.
Best
(digital)
Good
(analog)
Best
(analog)
Better
(analog)
Good
(analog)
Black
Blue
Green
and
Purple
Red
DTV Coaxial RF. When used for MPEG2 encoded bit streams from ATSC broadcast programming, this
input takes advantage of the High Definition content.
TV Coaxial RF. This is the connection for standard NTSC TV using antenna or cable.
RGB PC (VGA) - This video input has separate red, green and blue color components. The signal carries horizontal and vertical sync information on the green signal. This is most commonly used for
PC input.
i
Component - The video signal is separated into three signals, one containing the black-and-white
information and the other two containing the color information. This enhancement over S-Video takes
advantage of the superior picture provided by progressive scan DVD players and HDTV formats.
S-Video (AVl) - The video signal is separated into two signals, one containing the black-and-white
information and the other containing the color information. Separating the color in this way avoids
'cross color' effects where closely spaced black and white lines are erroneously displayed in color. It also
enables text to be displayed more sharply.
Good
(analog)
Noe: Fo_ mole intY_re/b_ to the Quick Sta/ Guide
Yellow
and
Orange
Version 1/25/2007 13
www.VlZlO.com
Composite (AVli2) - The complete video signal is carried through this single pin connector. This is the most commonly used video connection.
VlZtOVX37LHDTV10AUserManual
a,a Connectinq Vour DWD Player
You have several options for connecting your DVD player to your VX37L; HDMI, Component, AV (S- Video or Composite) inputs. Based on your configuration, you can decide which option is right for you.
s°soz Usinq HDMI
DVD players that have a digital interface such as HDMI (High Definition Multimedia Interface) should be connected to the HDMI input of the VlZtO VXSTL for optimal results.
Connectinq vour DYD P[aver [Best}:
_0
.
Turn off the power to the HDTV and DVD player.
2.
.
4.
Connect a HDMI cable to the HDMI output of your DVD player and the other end to
the HDMI Input (white color area) at the rear of the HDTV. Turn on the power to the HDTV and DVD player.
Select HDMI using the INPUT button on the remote or side of the HDTV, or directly by pressing the HDMI button on the Remote Control.
For DgD P[avers with DVI:
.
Turn off the HDTV and DVD player.
2.
5.
Version 1/25/2007 14
Using a HDMI-DVt cable, connect the DVl end to your DVD player and the HDMI end to the HDMI Input (white color area) at the rear of the HDTV.
.
Connect an audio cable (white and red connectors) to the audio output connectors associated with the DVl output of the DVD
player and connect the other end to the audio connectors by the HDMt input (white area) at the rear of the HDTV.
.
Turn on the power to the HDTV and your DVD player.
Select HDMI using the INPUT button on the remote or side of the HDTV, or directly by pressing the HDMI button on the Remote.
www.VlZlO.com
_0
2.2_2 Usinq Component Video
Connectinq your DYD Player (Better}:
t3 ¸
VlZtOVX37LHDTV10AUserManual
_0
.
Turn off the power to the HDTV and DVD player.
2.
Connect the Y (green color) connector on your DVD player to the corresponding Y (green color) connector in the Component 1 group (green color area - row of connectors nearest to
you when viewing from the rear of the TV) at the rear of the HDTV.
.
Connect the Pb (blue color) connector on your DVD player to the corresponding Pb (blue color) connector in the Component 1 group (green color area - row of connectors nearest to
you when viewing from the rear of the TV) at the rear of the HDTV.
.
Connect the Pr (red color) connector on your DVD player to the corresponding Pr (red color) connector in the Component 1 group (green color area - row of connectors nearest to you
when viewing from the rear of the TV) at the rear of the HDTV.
.
Using an audio cable (white and red connectors), connect the cable to the audio output
connectors associated with the Component output on your DVD player and connect the other end to the audio connectors associated with the Component 1 input (green color area) at the
rear of the HDTV.
.
Turn on the power to the HDTV and DVD player.
7.
Select Component using the INPUT button on the remote or side of the HDTV, or directly by pressing the Component button on the Remote Control.
Version 1/25/2007 15
www.VlZlO.com
a,8,3 Usinq S-Video {RVl} Connecbinq VOUr DVD P[avec {Good}:
VlZtOVX37LHDTV10AUserManual
I.
Turn off the power to the HDTV and DVD _ ......
player.
2.
Connect the S-Video jack on the rear of your DVD player to the S-Video jack in
the AVl group on the side of the HDTV.
.
Connect an audio cable (white and red connectors) to the audio output
connectors associated with the S-Video output on your DVD player and connect
the other end to the audio connectors associated with the AVl input on the side of the HDTV.
.
Turn on the power to the HDTV and DVD player.
5.
Select AVl using the INPUT button on the remote or side of the HDTV, or directly by pressing the AV button on the Remote Control.
2°2, 4 Usinq Composite (AV} Video
Connectinq vour OVO Player {Good}
I.
Turn off the power to the HDTV and DVD player.
2.
Connect the Video (yellow color) connector on your DVD player to the Video (yellow color)
connector in the AV2 group (yellow color area).
.
Connect the R (red color) and L (white color) audio connectors on your DVD player to the corresponding R (red color) and L (white color)
audio input connectors in the AV2 group (yellow color area).
.
Turn on the power to the HDTV and DVD Player.
5.
Select AV2 using the INPUT button on the remote or side of the HDTV, or directly by pressing the AV button on the Remote Control.
rlSV _U$_
i thewc
Version 1/25/2007 16
www.VlZlO.com
VtZlOVX37LHDTV10AUserManual
a,3 Connecbinq Your HDTV SeboTop Box
2o3oi Usinq HDMI
HDTV Set-Top Boxes that have a HDMI digital interface should be connected to the HDMI input of the LCD HDTV for optimal results.
_0
.
Turn off the power to the HDTV and HDTV Set-Top Box.
2.
Connect a HDMI cable to the HDMI output of your HDTV Set-Top Box and the other end to the HDMt Input (white color area) at the rear of the HDTV.
.
Turn on the power to the HDTV and HDTV Set-Top Box.
4.
Select HDMI using the INPUT button on the remote or side of the HDTV, or directly by pressing the HDMI button on the Remote Control.
Version 1/25/2007 17
www.VlZlO.com
For HDTV Set-Top Boxes with OVI °
.
Turn off the power to the HDTV and HDTV Set-Top Box.
2.
Using a HDMI-DVl cable, connect the DVl end to your HDTV Set-Top Box and the HDMI end
to the HDMI Input (white color area) at the rear of the HDTV.
.
Using an audio cable (white and red connectors), connect the cable to the audio output
connectors associated with the DVl output on your HDTV Set-Top Box and connect the other end to the audio connectors associated with the HDMI input (white area) at the rear of the
HDTV.
.
Turn on the power to the HDTV and HDTV Set-Top Box.
5.
Select HDMI using the INPUT button on the remote or side of the HDTV, or directly by pressing the HDMt button on the Remote Control.
VlZtOVX37LHDTV10AUserManual
_O
Note: The HDM npu is [or HD Video and wil ory suppo_ 640x480 a[ 60Hz fro_r_ a PC. Use fie RGB PC inpu or a g_ea er se eclior o PC _o_ma s.
_iiii
Version 1/25/2007 18
www,VlZlO,com
Loading...
+ 39 hidden pages