Vizio M470VT User Manual

CONNECTING TO DEVICES

YOU DESERVE

The inputs listed in the BEST column are OPTIMIZED for High Definition Video

HDTV TIPS

Make sure you have components with HDMI

M420VT / M470VT

LCD LED HDTV

BEFORE YOU BEGIN

THE BEST!

CONNECTION

ADVICE

HIGHEST DIGITAL

PICTURE QUALITY

QUALITY PICTURE

HDMI

and Audio. Connect using these inputs wherever possible.

GOOD

AV/S-VIDEO

DTV/TV

BETTERBEST

ANALOG HD

QUALITY PICTURE

COMPONENT

LOW RESOLUTION

NOT RECOMMENDED

outputs to ensure the BEST possible picture.

SATELLITE / CABLE GAMING CONSOLE

BLU-RAY

™

/ DVD

3 WAYS TO WATCH

HIGH DEFINITION VIDEO

What’s In the Box

• VIZIO HDTV

• VIZIO Remote Control

• User Manual (read Safety Guidelines)

• Registration Card

• Quickstart Guide

• Screen Cleaning Cloth

INSTALLING YOUR HDTV

(including 2 AA batteries)

CONNECTION TYPE

CONNECTOR IMAGE

1. Get a VIZIO Blu-ray™ Disc Player.

2. Contact your cable company or satellite provider to learn more about HD programming in your local area (an HD cable box or satellite receiver may be required).

3. You may be able to get HD signals using an off-air antenna. To see if you can receive off-air HD signals, and for help choosing the right antenna, visit

We provide professional installation services. Visit www.VIZIO.com or call (888) 849.4623 to order today!

Attaching the Stand Base to the TV

1. Place the TV face down on a soft, flat surface.

2. Insert the base stand into the bottom of your VIZIO TV and align the thumb screw holes.

3. Tighten thumb screws.

4. Move the TV into an upright position and place so that the rear connectors remain accessible.

(see fig. 2)

(see fig. 1)

FIG. 1

FIG. 2

Thumb screw

MAKE THE BEST HIGH DEFINITION CONNECTION!

www.antennaweb.org

VIZIO HIGH DEFINITION CABLES

For more information about VIZIO Certified* High Definition cables please visit us at: www.VIZIO.com

HIGH DEFINITION

OUT

HOME THEATER

YOUR VIZIO TV EVEN HAS EASY TO ACCESS SIDE INPUTS

Preparing the TV for Wall Mounting - please refer to "Wall mounting your HDTV" in your User Manual for more information.

MATCH YOUR VIZIO TO A

CERTIFIED* WALL MOUNT

BACK OF TV

Turn on your TV by pressing the Power button on

POWER THE TV

VIZIO Blu-ray

Bring your movies to life!1080p Full HD playback delivers crystal clear images with lifelike detail and High Definition Audio puts you in the center of the action.Visit

www.VIZIO.com for more details.

™

TILT MOUNT VMT13-30 SWING MOUNT VMA13-26

*Tested and certified by VIZIO engineers for compatibility with your TV.

either the TV or the remote control

HIGH-DEFINITION SOUND

Complete your total Home Theatre experience with stunning audio from VIZIO accessories such as the Sound Bar with Wireless Subwoofer.

Visit www.VIZIO.com or call (888) 849.4623.

M420VT / M470VT

LCD LED HDTV QUICKSTART GUIDE

SETUP

1. The Initial Setup menu should appear on-screen. Use your remote control to follow the directions on the HDTV. Be sure to insert the batteries in your remote first.

2. Select your desired language

3. Choose Home Mode for optimal energy savings

(Cont.)

(see Fig. 1).

(see Fig. 2).

IF YOU USE A CABLE OR SATELLITE BOX:

1. Exit the Setup Wizard.

2. Select the input source for the device you are connecting to your HDTV.

Fig. 1

Initial Setup

Please select your language: English

Fig.2

Initial Setup

Please select your input location:

Fig. 3

Initial Setup

Please select your input source:

Français

Español

NextBack Select Exit

NextBack Select

Antenna

Language

EXIT

Mode Setting

Home

Retail

EXIT

Exit

Cable

Tuner

HELP TOPICS

PROGRAM YOUR CABLE OR SATELLITE REMOTE

Call your Cable or Satellite provider to determine if you need a 3, 4 or 5-digit code. Refer to the following chart of VIZIO codes and follow your provider's instructions to program your Cable or Satellite remote.

SERVICE PROVIDER

CABLE 11758, 10178, 10128 1758, 0178, 0128

DIRECT TV

5-DIGIT CODES 4-DIGIT CODES 3-DIGIT CODES

11758, 10178, 10128 1758, 0178, 0128

3. You’re done! Enjoy the show.

IF YOU USE A CABLE FROM THE WALL OR AN ANTENNA TO RECEIVE TV CHANNELS:

1. Choose between Cable or Antenna to match your input source (see Fig. 3).

2. Begin the scan for channels

Note: Your Service Provider may provide access to HD channels during the channel scan. Please be patient and wait for 100% completion.

3. Once the scan is complete, follow the on-screen instruction to exit the Initial Setup menu

(see Fig. 5).

(see Fig. 4).

NextBack Select

Fig. 4

Initial Setup

Channel Scan will take a few minutes to complete.

Status: Scanning... Analog Channels: 0 Digital Channels: 4

Fig. 5

Initial Setup

Congratulations !!

Initial Setup completed

Back Next

Channel Scan

EXIT

Exit

EXIT

Exit

Complete

DISH NETWORK 627

PROBLEM SOLUTION

Make sure the power button is ON . Make sure the AC power cord is securely connected to the AC socket and try plugging the TV

No Power

directly into the wall. Plug another electrical device (like a radio) to the outlet to verify the outlet is supplying power.

EXTENDED WARRANTIES

Protect your VIZIO product with up to 5 years of added

repair service! Extended coverage begins when the

manufacturer's warranty expires so you’ll receive

maximum protection!

LEARN MORE

Refer to your User Manual for in-depth descriptions or

more information.

Picture is blurry or fuzzy/ image quality issues

Cannot change channels up and down with direct cable hookup from wall or antenna

Cannot return to the Setup Wizard

Screen is displaying blue/no

For the best image quality, view HD wide screen programs where possible. If HD content is not available, view Standard Definition from a digital source. Standard analog TV will always be noticeably inferior to HD because your digital flat panel TV has video that is many times better than old TVs, and thus you can see interference and deficiencies you did not know you had.

Press the MENU button. Use the arrows to navigate to the TV menu. Select the second option Channels. Select the appropriate signal source by using the left and right arrows. Once signal source is correct, highligh scan channels, then press the OK key.

The Setup Wizard is no longer accessible after being run once, but all of the same settings can still be changed. Press the MENU button to access them. For channel scan, see the above topic.

Your TV may be on an inactive input. After powering on the TV, press the INPUT button on your remote repeatedly until a picture

Visit us online at:

www.VIZIO.com

or Call:

(888) 849. 4623

For more info on Extended Warranties

and special offers.

www.VIZIO.com

signal and/or turning off after a few seconds

Panoramic mode is not available

Black or gray bars on top, bottom, and/or sides of picture

re-appears. If this does not work, try it a second time but press the button slower this time; it can take as long as 30 seconds for the image to reappear.

When the TV displays an HD resolution the Panoramic viewing mode will not be available.

Try setting your TV to wide or zoom mode; the image should fill the screen. If you still see bars, they are part of the image the TV is receiving. Cable and satellite boxes may add black bars to the picture, especially when HDMI cables are used. For more information, please contact your service provider.