Vivitar DVR 558HD, DVR 859HD, DVR 578HD, DVR 942HDv3 User Manual
DVR 558HD
Digital Camcorder
User Manual
© 2009-2012 Sakar International, Inc. All rights reserved.
Windows and the Windows logo are registered trademarks of Microsoft Corporation.
All other trademarks are the property of their respective companies.
1
TABLE OF CONTENTS
Introduction ........................................................................................................................................... 2
What’s Included .................................................................................................................................... 2
Parts of the Camcorder ......................................................................................................................... 3
Initial Camcorder Setup ........................................................................................................................ 4
Main Camcorder Modes ........................................................................................................................ 8
Camcorder Technical Specifications ..................................................................................................... 9
Computer System Requirements ........................................................................................................ 10
Powering ON/OFF Your Digital Camcorder ......................................................................................... 11
Changing Camcorder Mode ................................................................................................................ 12
Navigating the Menus ......................................................................................................................... 13
LED Light ............................................................................................................................................ 16
Video Capture Mode ........................................................................................................................... 17
Video Playback Mode ......................................................................................................................... 24
Photo Capture Mode ........................................................................................................................... 29
Photo Playback Mode ................................................................................................ ......................... 38
Camcorder Setup Menus .................................................................................................................... 45
Slide Show .......................................................................................................................................... 48
Connecting the Digital Camcorder to the TV ....................................................................................... 49
Installing the Software ......................................................................................................................... 50
Connecting the Camcorder to the Computer....................................................................................... 51
Getting Photos and Videos from the Camcorder to the Computer ...................................................... 52
Getting Started! ................................................................................................................................... 53
Transferring Images from the Camcorder to the Computer Manually ................................................. 53
Camcorder Maintenance ..................................................................................................................... 55
Sakar Warranty Card .......................................................................................................................... 55
Technical Support ............................................................................................................................... 56
Troubleshooting .................................................................................................................................. 56
2
Introduction
Thank you for purchasing this digital camcorder. Everything you need to take quality digital photos and
videos is included with your digital camcorder.
Vivitar makes capturing those special moments as easy as possible.
Note:
Your digital camcorder needs an SD Memory card (up to 32GB) for normal use. SD Memory cards
are not included and need to be purchased separately.
Important: You must use only a Class 4 SDHC Memory card or higher.
This camera is a plug and play device. You can download the pictures and videos captured by your
camera without the software by directly accessing the camera’s memory card from your computer.
It is recommended however that you install the Vivitar Experience Image Manager Software to
enjoy the full Vivitar experience.
Please read this manual carefully first in order to get the most out of your digital camcorder.
What’s Included
1) Digital Camcorder
2) USB cable
3) TV Cable
4) Vivitar Experience Image Manager Software
Installation CD
Note:
Hand Strap included (not shown).
Class 4 (or higher) SDHC Memory card not included.
3
Parts of the Camcorder
1. Power Button
10. USB Port
2. Home Button
11. Hand Strap
3. Digital Lens
12. Tripod Mount
4. LCD Touch Screen
13. Battery Compartment / SD Memory Card Slot
5. Speaker
14. LED Light
6. Shutter Button
15. Microphone
7. Zoom Out
8. Zoom In
9. LED Light Indicator
4
Initial Camcorder Setup
INSTALLING THE BATTERIES
Make sure the batteries have been inserted properly into your digital camera, according to the polarity
shown on the battery holding frame.
Use 3 x AAA (1.5V) batteries. Alkaline batteries are recommended. Batteries not included.
To Install the Batteries:
1) Slide open the battery/memory card compartment door.
2) Pull out the battery holding frame.
3) Insert 3 x AAA batteries into the battery holding frame according to the correct polarities as shown
in the photo above.
4) Slide the battery holding frame with the installed batteries into the battery compartment.
5) Close the door and slide back into place to securely close the battery/memory card compartment.
Note:
Remove the batteries from the camera when not in use for an extended period.
Do not mix alkaline and non-alkaline batteries.
Some features will not work if the battery power level is low.
Rechargeable batteries not recommended.
When the battery power is empty the battery icon turns red and ‘Low Battery’ flashes on the
LCD screen. The camcorder automatically turns off a few seconds later.
The energy status of the power is displayed on LCD as shown below:
Full battery power Medium battery power Low battery power
5
INSTALLING THE SD MEMORY CARD
IMPORTANT: You must use only a Class 4 SDHC Memory card or higher.
Make sure a Class 4 (or higher) SD card (up to 32GB) has been properly inserted into your camera.
SD card not included.
To properly insert the SD Card:
1) Slide open the battery/memory card compartment door.
2) Push the SD card into the slot in the direction as shown by the SD card icon on the camera.
See images below: 1 and 2.
3) Push the SD card until you hear a slight clicking sound. This indicates the SD card has been
inserted correctly. See images below: 3 and 4.
4) Close the door and slide back into place to securely close the battery/memory card compartment.
Note:
After the camera is powered on, the SD icon will appear on the LCD display. If you do not
see the SD icon on the display, please check if the card was inserted properly.
6
Make sure the SD card is not locked (check the lock switch on the side of the SD card).
If the SD card is locked this will prevent the camera from saving captured photos to the SD card.
POWERING ON THE CAMERA
1) Flip open the LCD screen.
2) Press the POWER button to turn on the camera.
After flipping open the LCD Touch Screen and powering the camcorder ON for the first time, the
camcorder takes you through the Initial Camcorder Setup that allows you to select the camcorder’s
language, date/time and ViviLink. See below for details.
SETTING THE CAMCORDER LANGUAGE
1) You will first be prompted to select a language for the camcorder.
The Language options appear. Drag up or down to scroll and view the menu options.
2) Select the language of your choice and tap SAVE & EXIT to confirm the selection.
3) After selecting a language, you will be asked if you would like to continue with the initial camcorder
setup. The following message appears: “Continue with Camcorder Setup?”
Tap “Yes” to continue or “No” to exit the setup.
7
Note: If you select “No” and decide to leave the camcorder setup, the camcorder will be set to its
default settings. These settings can be adjusted at any time manually through the menus of the
camcorder.
SETTING THE DATE AND TIME
The next step in the initial camcorder setup is to set the date and time on the camcorder.
1) Drag up or down to scroll and view the Date and Time options.
2) Set the Date and Time as desired and tap SAVE & EXIT to confirm the selection and move to the
next part of the camcorder setup.
SETTING THE VIVILINK DEFAULT OPTION
Once the Date and Time have been set, you will be asked to set the default ViviLink destination for
photos and videos taken with your camcorder.
The ViviLink technology allows you to quickly and easily upload your camcorder’s photos and videos
to the social networks of your choice with the accompanying software application.
1) First you will be asked to choose the default ViviLink social network for Photos.
Drag up or down to scroll through and select the ViviLink for Photos option and then tap SAVE &
EXIT to confirm your selection.
2) Next you will be asked to choose the default ViviLink social network for Videos. Drag up or down to
scroll through and select the ViviLink for Videos option and then tap SAVE & EXIT to confirm your
selection.
Congratulations! Your camcorder is now ready to use.
8
Main Camcorder Modes
Video Capture Mode
Use this mode to capture videos with your digital camcorder.
This is the default mode when the camcorder is powered ON.
To take a video, aim your camcorder as desired and press the Shutter button to start the
record. A red, blinking record indicator appears on the LCD screen while the recording is in
progress. To stop the recording, press the Shutter button again. The video is automatically
saved to your camcorder’s memory card.
To access the various menus for the Video Capture Mode, tap MENU on the LCD screen
while in the Video Capture Mode.
Photo Capture Mode
Use this mode to capture pictures with your camcorder.
After turning on your camcorder, press the HOME button to open the Camcorder Mode
options. Tap Camera to enter Photo Capture Mode.
To take a picture, aim your camcorder as desired and press the Shutter button.
The picture is automatically saved to your camcorder’s memory card.
To access the various menus for the Photo Capture Mode, tap MENU on the LCD screen
while in the Photo Capture Mode.
Playback Mode (Photos & Videos)
Use this mode to view and manage the videos and photos seen on your camcorder - saved
to your SD memory card. After turning on your camcorder, press the HOME button to open
the Camcorder Mode options. Tap Playback to enter the Playback Mode for photos and
videos. You can scroll through the photos and videos that you’ve previously taken to view,
edit or delete them as desired.
To access the various menus for the Playback Mode for photos and videos, tap MENU on
the LCD screen while in the Playback Mode.
Your camcorder has different modes for the various camcorder functions.
You can switch modes by pressing the HOME button to the left of the LCD screen. The Home menu is
shown on the LCD. Tap Camera, Video, or Playback to change your camcorder mode.
9
Camcorder Technical Specifications
Image Sensor
CMOS Sensor
Image Resolution
2592x1944 (5M), 2048x1536 (3.1M),
1920x1080 (2MHD), 640x480 (VGA)
Video Resolution
1280x720 (HD), 640x480 (VGA), 320x240 (QVGA)
File Format
JPEG (Photo), AVI (Video)
Internal Memory
8MB SDRAM (Buffer) - enough for 1 sample photo
External Memory
Class 4 (or higher) SDHC Memory card (up to 32GB)
LCD Display
2.4 Inch Touch TFT – opens 90 degrees
Lens
f=4.8mm, F2.4
Zoom
4X Digital Zoom
Exposure
-3.0EV ~ +3.0EV
White Balance
Auto, Daylight, Cloudy, Fluorescent, Incandescent
ISO
Auto, 100, 200, 400
Scene
Auto, Scenery, Portrait, Night Scenery, Night Portrait, High
Sensitivity, Beach
Language
English, French, Spanish, Portuguese, German, Italian, Russian,
Polish, Greek
Flash
LED Flash lamp
Self-Timer
2, 5 or 10 second delay ; Off
Anti-Shake
Yes
Print Photos
Yes
Face Detect
Yes
Auto Power Off
1 minute, 3 minutes, 5 minutes, Off
Interface
USB 2.0 High Speed
System Requirements
Windows XP (SP 3), Vista (SP1) and Windows 7 ;
Mac OSX v10.5.x and above
Batteries
3 x AAA (1.5V) batteries
Working Temperature
0~40C
10
Computer System Requirements
To be able to download photos and videos to your computer using the Vivitar Experience Image
Manager Software, you will need the following minimum configuration:
WINDOWS OS
MICROSOFT® Windows XP with Service Pack 3, Windows Vista with Service Pack 1 or Windows 7
Pentium® 4 processor (or above)
1 GB RAM, 250 MB available hard disk space
16-bit Color monitor, 1024 X 768 recommended screen resolution
CD-ROM Drive
QuickTime® 6 or higher
MICROSOFT ® Internet Explorer 7 or higher
Windows Media Player 10 or higher
DirectX 9 or higher
Internet connection required
MACINTOSH OS
Intel processor running MACINTOSH OS X v10.5.x or later
1 GB RAM, 250 MB available hard disk space
Display: 1024 x 768 or higher-resolution monitor
QuickTime® 6 or higher
CD-ROM Drive
Internet connection required
Note: Make sure the latest compatible Adobe® Flash® Player is installed on your computer.
11
Powering ON/OFF Your Digital Camcorder
Make sure the batteries have been inserted properly into your digital camera.
Make sure the Class 4 SD Memory card has been installed properly into your camcorder.
SDHC Class 4 card up to 32GB - SD Card not included.
POWERING THE CAMCORDER ON
Flip open the LCD display panel. Press the Power button to turn your camcorder ON.
The camcorder will be in Video Capture Mode to start.
POWERING THE CAMCORDER OFF
While the camcorder is on, you can press the Power button again at any point to turn your
camcorder OFF. You will see a “Goodbye” splash screen and then the camcorder will power off
completely.
Alternatively, you can press the HOME button and then tap the Power Off icon. Tap ‘YES’ to
select to power off the digital camcorder or ‘NO’ to return to the Home Main Menu Screen and continue
using your camcorder.
AUTO POWER OFF – POWER SAVING
Your digital camcorder also has an Auto Power Off feature that automatically turns off your camcorder
after a specific period of time that your camcorder is left idle. The Auto Power Off time can be set from
the Setup/Auto Off menu settings.
12
Changing Camcorder Mode
Your camcorder has three main modes:
1) Video Capture Mode - Use this mode to capture videos with your camcorder.
2) Photo Capture Mode - Use this mode to capture photos with your camcorder.
3) Playback Mode (for photos and videos) - Use this mode to view the photos and videos you
have already taken with your camcorder.
When the digital camcorder is first powered ON, the Video Capture Mode will be active. The icons that
appear on the LCD screen are the best default settings so that you can begin to capture and enjoy
clear quality videos and photos.
To change the active digital camcorder mode:
Make sure the digital camcorder is powered ON.
Press the HOME button to the left of the LCD Panel.
Tap one of the following icons to select the active camcorder mode:
Camera
Video
Playback
When in Video Capture Mode, this icon will display on the top-left corner of the LCD display
When in Photo Capture Mode, this icon will display on the top-left corner of the LCD display
When in Playback Mode, this icon will display on the top-left corner of the LCD display
13
Navigating the Menus
Camera
Tap to enter Photo Capture Mode
Video
Tap to enter Video Capture Mode
Playback
Tap to enter Playback Mode
Setup
Tap to enter Camcorder General Settings
Slide Show
Tap to begin Photo Slide Show
Power Off
Tap to Power off your digital camcorder
You camcorder includes the following menus:
Home Menus
Camcorder Mode Menus
Camcorder Setup Menus
HOME MENUS
The Home screen menu allows you quick access to the camcorder modes and settings as well as to
the photo slide show and the power off features.
1) Press the HOME button located on the left side of the LCD touch screen.
2) The following menu options appear on the Home screen:
14
CAMCORDER MODE MENUS
Each camcorder mode has a set of menus specific to that mode.
To access and use the camcorder mode menus:
1) Enter the Main Menu Screen from Video Capture, Photo Capture or Playback Mode:
Tap MENU as seen on the bottom left of the LCD touch screen to open the menus for the
current mode.
2) Select a Main Menu Option:
Drag up or down to scroll and view the Main Menu options.
To select a menu, tap the desired menu icon to open the various options for that menu.
Note: To exit the Main Menu screen without selecting a menu, tap Exit and return to the
current mode.
3) Select a Sub-Menu Option:
Once you have selected the menu option, drag up or down to scroll and highlight the desired
sub-menu option.
Tap SAVE & EXIT to confirm and select the highlighted option.
4) Return to the Main Menu Screen:
Once you have confirmed your selection, the Main Menu appears.
Tap another menu icon to select and open a different menu item or tap Exit to return to
the current Mode.
5) The selected option icon appears on the touch LCD screen.
Note:
Changes made to these options will remain until you decide to change them at a later time or
restore the camcorder’s default factory settings.
Some menu options are single-use functions that are not remembered by the camcorder and do
not display an icon on the LCD screen.
For more details regarding specific menu options, please refer to the menu information listed for each
mode.
15
CAMCORDER SETUP MENUS
The general settings for your digital camcorder can easily be changed at any time.
1) Press the HOME button to the left of the LCD touch screen to open the Home Menu options.
2) Tap the Setup icon to enter the menu options for your camcorder general settings.
3) Select a Setup Option:
Drag up or down to scroll and view the main Setup menus.
To select a Setup menu, tap the desired menu icon to open the various options for that menu.
Note: To exit the Setup screen without selecting a menu, tap Exit and return to the Home
Menu screen.
4) Select a Setup Sub-Menu Option:
Once you have selected the Setup menu option, drag up or down to scroll and highlight the
desired sub-menu option.
Tap SAVE & EXIT to confirm and select the highlighted option.
5) Return to the Setup Main Menu Screen:
Once you have confirmed your selection, the Setup Main Menu appears.
Tap another menu icon to select and open a different menu item or tap Exit to return to
the Home Menu screen.
Note: Changes made to these options will remain until you decide to change them at a later time or
restore the camcorder’s default factory settings.
For more details regarding specific camcorder setup menus, please refer to the ‘Camcorder Setup
Menus’ section of this manual.
16
LED Light
LED FLASH LIGHT OPTION
To increase the lighting in dark situations while capturing videos and photos, use the LED Flash Light
on the front of the camcorder below the lens.
LED ON:
Tap the LED icon, located on the bottom left section (above the MENU) of the LCD touch screen.
This changes the icon and activates the LED Lights.
When the LED lights are on, the following icon appears on the LCD screen:
LED OFF:
Tap the LED icon on the LCD screen.
When the LED lights are off, the following icon appears on the LCD screen:
17
Video Capture Mode
The Video Capture Mode allows you to capture videos with your digital camcorder.
When the camcorder is first powered ON, the camcorder will be in Video Capture Mode.
TAKING A VIDEO
1) While in Video Capture Mode use the LCD display to direct the camcorder at the scene you would
like to capture.
2) You can magnify your subject up to 4 times using the digital zoom while capturing your photos and
recording your videos.
Press the Zoom In / T button to zoom in on the object.
Press the Zoom Out / W button, to zoom back out.
Alternatively, you can tap the T or W on the right side of the LCD screen to zoom in and out.
The following Digital Zoom Indicator appears on the right side of the LCD screen:
The zoom indicating bar moves up when you Zoom In (T) and moves down when you Zoom Out
(W).
3) Press the Shutter button to START the video capture.
4) A red, blinking icon appears at the top of the LCD screen indicating that the recording is in progress.
On the top right of the LCD screen, the recording time appears, indicating the amount of elapsed
time as the video is being captured. In addition, the LED light indicator blinks green while the
recording is in progress.
5) To STOP the video record, press the Shutter button again.
6) The video is automatically saved to the camcorder’s SD memory card.
Loading...