ViewSonic VS18552, VX4381-4K User's Guide
VX4381-4K
Display
User Guide
IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in a safe manner, as well as registering your product for future service. Warranty information contained in this User Guide will describe your limited coverage from ViewSonic® Corporation, which is also found on our web site at http://www.viewsonic.com in English, or in specific languages using the Regional selection box in the upper right corner of our website. “Antes de operar su equipo lea cu idadosamente las instrucciones en este manual”
Model No. VS18552
P/N: VX4381-4K
Thank you for choosing ViewSonic®
As a world-leading provider of visual solutions, ViewSonic® is dedicated to exceeding the world’s expectations for technological evolution, innovation, and simplicity. At ViewSonic®, we believe that our products have the potential to make a positive impact in the world, and we are confident that the ViewSonic® product you have chosen will serve you well.
Once again, thank you for choosing ViewSonic®!
2
Safety Precautions
Please read the following Safety Precautions before you start using the device.
•Keep this user guide in a safe place for later reference.
•Read all warnings and follow all instructions.
•Sit at least 18" (45 cm) away from the device.
•Allow at least 4" (10 cm) clearance around the device to ensure proper ventilation.
•Place the device in a well-ventilated area. Do not place anything on the device that prevents heat dissipation.
•Do not use the device near water. To reduce the risk of fire or electric shock, do not expose the device to moisture.
•Avoid exposing the device to direct sunlight or other sources of sustained heat.
•Do not install near any heat sources such as radiators, heat registers, stoves, or other devices (including amplifiers) that may increase the temperature of the device to dangerous levels.
•Use a soft, dry cloth to clean the external housing. For more information, refer to the "Maintenance" section of this manual.
•Avoid touching the screen, as oil may collect on the screen if you touch it.
•Do not touch the screen surface with sharp or hard objects, as it may cause damage to the screen.
•Do not place the device on cloth or other materials that may be placed between the product and supporting furniture.
•When moving the device, be careful not to drop or bump the device on anything.
•Do not place the device on an uneven or unstable surface. The device may fall over resulting in an injury or a malfunction.
•Do not place any heavy objects on the device or connection cables.
•Always use cabinets, stands, or installation methods recommended by the manufacturer of the device set.
•Always use furniture that can safely support the device.
•Always ensure the device is not overhanging the edge of the supporting furniture.
•Do not place the device on tall furniture, such as cupboards or bookcases, without anchoring both the furniture and the device to a suitable support.
•Always educate children about the dangers of climbing on furniture to reach the device or related equipment.
3
•Do not place the monitor where children are likely to be present.
•Do not place items that might tempt children to climb, such as toys and remote controls, on the top of the device or furniture on which the product is placed.
•If smoke, an abnormal noise, or a strange odor is present, immediately turn the device off and call your dealer or ViewSonic®. It is dangerous to continue using the device.
•Do not attempt to circumvent the safety provisions of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade and the third prong are provided for your safety. If the plug does not fit into your outlet, obtain an adapter and do not attempt to force the plug into the outlet.
•When connecting to a power outlet, Do not remove the grounding prong. Please ensure grounding prongs are never removed.
•Always route and manage cords and cables connected to your device so they cannot be tripped over, pulled, or grabbed.
•Protect the power cord from being treaded upon or pinched, particularly at the plug, and at the point where it emerges from the equipment. Ensure that the power outlet is located near the equipment so that it is easily accessible.
•Disconnect the power plug from the power outlet if the device is not being used for a long period of time.
•Please confirm the distribution system installed in the building. The system should provide a circuit breaker rated at 120/240V, 20A.
•Only use attachments/accessories, such as carts, stands, tripods, brackets or tables, specified by the manufacturer.
•When a cart is used, use with caution when moving the cart/equipment combination to avoid injury from tipping over.
•Refer all servicing to qualified service personnel. Service will be required when the unit has been damaged in any way, such as:
ͫif the power-supply cord or plug is damaged.
ͫif liquid is spilled onto or objects fall into the unit.
ͫif the unit is exposed to rain or moisture.
ͫif the unit does not operate normally or has been dropped.
•When using ear-/headphones, adjust the volume to appropriate levels, or hearing damage may result.
4
•Fastening the display to a wall or fixed object using cordage or other restraining devices can help support the weight of the display in order to prevent the display from falling over.
Hole pattern |
Interface Pad |
Pad Hole |
Screw Specification & Quantity |
|
(W x H) |
(W x H x D) |
|||
|
|
|||
200 x 100 mm |
115 x 115 x 2.6 mm |
Ø 5 mm |
M4 x 10 mm |
|
4 pieces |
||||
|
|
|
VESA wall moun ng hole |
NOTE:
•Restraining device/cordage should be able to withstand 100N force.
•Make sure the cordage is straightened, and any slack is removed. The back of the device shall face the wall to ensure the device cannot tilt under external force.
•Make sure the display does not tilt under external force at any height and rotation angle of the device.
•If the existing display is going to be retained and relocated, the same considerations as above should be applied.
5
Contents |
|
Safety Precautions....................................................... |
3 |
Introduction................................................................. |
8 |
Package Contents.................................................................................................... |
8 |
Product Overview.................................................................................................... |
9 |
Front and Rear View................................................................................................ |
9 |
I/O Ports .................................................................................................................. |
9 |
Initial Setup............................................................... |
10 |
Wall Mounting...................................................................................................... |
10 |
Using the Security Slot.......................................................................................... |
11 |
Making Connections................................................... |
12 |
Connecting to Power............................................................................................. |
12 |
Connecting External Devices................................................................................. |
13 |
DisplayPort MST Daisy Chain Connection.............................................................. |
14 |
Using the Monitor...................................................... |
15 |
Adjusting the Viewing Angle................................................................................. |
15 |
Tilt Angle Adjustment............................................................................................ |
15 |
Turning the Device On/Off.................................................................................... |
16 |
Hot Keys................................................................................................................. |
17 |
Quick Menu............................................................................................................ |
19 |
Shortcut Menu....................................................................................................... |
19 |
Configuring the Settings........................................................................................ |
20 |
General Operations................................................................................................ |
20 |
On-Screen Display (OSD) Menu Tree..................................................................... |
22 |
Appendix................................................................... |
28 |
Specifications........................................................................................................ |
28 |
Glossary................................................................................................................. |
31 |
Troubleshooting.................................................................................................... |
35 |
Maintenance......................................................................................................... |
37 |
General Precautions............................................................................................... |
37 |
Cleaning the Screen............................................................................................... |
37 |
Cleaning the Case................................................................................................... |
37 |
6
Regulatory and Service Information........................... |
38 |
Compliance Information....................................................................................... |
38 |
FCC Compliance Statement.................................................................................... |
38 |
Industry Canada Statement................................................................................... |
38 |
Declaration of RoHS2 Compliance......................................................................... |
39 |
Indian Restriction of Hazardous Substances.......................................................... |
40 |
Product Disposal at End of Product Life................................................................. |
40 |
Copyright Information........................................................................................... |
41 |
Customer Service................................................................................................... |
42 |
Limited Warranty................................................................................................... |
43 |
Mexico Limited Warranty...................................................................................... |
46 |
7
Introduction
Package Contents
•Monitor
•Power cord
•Video cable
•Quick start guide
NOTE: The power cord and video cables included in your package may vary depending on your country. Please contact your local reseller for more information.
8
Product Overview
Front and Rear View
USB Downstream
USB Upstream
I/O Ports
HDMI 2 |
HDMI 1 |
Joy Key
Shortcut Keys
IN 
OUT
|
|
|
|
|
|
|
|
2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 |
|
|
|
|
3 |
3 |
4 |
|
|
|
5 |
|
|
|
|
|
|
6 |
|
|
|
|
||||||
1. |
AC IN |
|
2. |
Audio Out |
|
3. |
|
|
HDMI |
|
|
|
|
|
|
||||||||||||||
4. |
Mini DP |
|
5. |
DisplayPort In |
|
6. |
|
|
DisplayPort Out |
||||||||||||||||||||
9
Initial Setup
Wall Mounting
NOTE: Only use UL Certified wall mount kits.
200 mm
<![if ! IE]><![endif]>mm 100
Refer to the table below for the standard dimensions for wall mount kits.
Maximum |
Hole pattern |
Interface Pad |
Pad Hole |
Screw Specification |
|
Loading |
(W x H) |
(W x H x D) |
|
& Quantity |
|
14 kg |
200 x 100 mm |
115 x 115 x 2.6 mm |
Ø 5 mm |
M4 x 10 mm |
|
4 pieces |
|||||
|
|
|
|
NOTE: Wall mount kits are sold separately. To obtain a wall mounting kit,
contact ViewSonic® or your local dealer.
1.Turn off the device and disconnect all cables.
2.Place the device on a flat, stable surface with the screen facing down.
3.Remove the monitor stand.
4.Attach the mounting bracket to the VESA mounting holes at the rear of the device. Then secure it with four (4) screws (M4 x 10 mm).
5.Follow the instructions that come with the wall mounting kit to mount the monitor onto the wall.
10
Using the Security Slot
To help prevent the device from being stolen, use a security slot locking device to secure the device to a fixed object.
Additionally, fastening the monitor to a wall or fixed object using a security cable can help support the weight of the monitor in order to prevent the monitor from falling over.
Below is an example of setting up a security slot locking device on a table.
11
Making Connections
This section guides you on how to connect the monitor with other equipment.
Connecting to Power
1.Connect the power cord to the AC IN jack at the rear of the device.
2.Connect the power cord plug to a power outlet.
1 |
|
|
|
|
2 |
||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
12
Connecting External Devices
IN
HDMI |
HDMI |
|
13
DisplayPort MST Daisy Chain Connection
With DisplayPort Multi-Stream Transport (MST) support, you can daisy chain connect up to four (4) monitors.
1.Connect one end of a DisplayPort cable to the DisplayPort Out port of your computer. Then connect the other end of the cable to the DisplayPort In port of the monitor.
2.Use another DisplayPort cable to connect to the DisplayPort Out port of the first monitor. Then connect the other end of the cable to the DisplayPort In port of the second monitor.
3.Repeat Step 2 as needed with up to four (4) monitors.
NOTE: Your graphics card compatibility and monitor resolution will determine
the number of monitors.
|
HDMI 2 |
HDMI 1 |
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
IN 
OUT
|
Out |
|
|
|
|
|
In |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
Out |
|
|
|
|
|
|
In |
|
|
|
Out |
|
|
|
|
|
|
|
|
In |
|
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NOTE:
•DisplayPort 1.2 MST must be turned on in the Setup Menu in the OSD Menu to enable daisy chaining.
•If the input source changes to HDMI, DisplayPort 1.2 MST will turn off automatically.
14
Using the Monitor
Adjusting the Viewing Angle
Tilt Angle Adjustment
Tilt the monitor forwards or backwards to the desired viewing angle (-5˚ to 23˚).
NOTE: When adjusting, support the stand firmly with one hand while tilting the
monitor forwards or backwards with the other hand.
15
Loading...