ViewSonic VS18231, VA2732-MH, VA2732-MHD, VA2732-MHD-2 Users manual

0 (0)

VA2732-h/-mh/-mhd

Display

User Guide

IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in a safe manner, as well as registering your product for future service. Warranty information contained in this User Guide will describe your limited coverage from ViewSonic® Corporation, which is also found on our web site at http://www.viewsonic.com in English, or in specific languages using the Regional selection box in the upper right corner of our website. “Antes de operar su equipo lea cu idadosamente las instrucciones en este manual”

Model No. VS18231

P/N: VA2732-H/VA2732-MH/VA2732-MHD/VA2732-MHD-2

Thank you for choosing ViewSonic®

As a world-leading provider of visual solutions, ViewSonic® is dedicated to exceeding the world’s expectations for technological evolution, innovation, and simplicity. At ViewSonic®, we believe that our products have the potential to make a positive impact in the world, and we are confident that the ViewSonic® product you have chosen will serve you well.

Once again, thank you for choosing ViewSonic®!

2

Safety Precautions

Please read the following Safety Precautions before you start using the device.

Keep this user guide in a safe place for later reference.

Read all warnings and follow all instructions.

Sit at least 18" (45 cm) away from the device.

Allow at least 4" (10 cm) clearance around the device to ensure proper ventilation.

Place the device in a well-ventilated area. Do not place anything on the device that prevents heat dissipation.

Do not use the device near water. To reduce the risk of fire or electric shock, do not expose the device to moisture.

Avoid exposing the device to direct sunlight or other sources of sustained heat.

Do not install near any heat sources such as radiators, heat registers, stoves, or other devices (including amplifiers) that may increase the temperature of the device to dangerous levels.

Use a soft, dry cloth to clean the external housing. For more information, refer to the "Maintenance" section on page 40.

Oil may collect on the screen as you touch it. To clean the greasy spots on the screen, refer to the "Maintenance" section on page 40.

Do not touch the screen surface with sharp or hard objects, as it may cause damage to the screen.

When moving the device, be careful not to drop or bump the device on anything.

Do not place the device on an uneven or unstable surface. The device may fall over resulting in an injury or a malfunction.

Do not place any heavy objects on the device or connection cables.

If smoke, an abnormal noise, or a strange odor is present, immediately turn the device off and call your dealer or ViewSonic®. It is dangerous to continue using the device.

Do not attempt to circumvent the safety provisions of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade and the third prong are provided for your safety. If the plug does not fit into your outlet, obtain an adapter and do not attempt to force the plug into the outlet.

3

When connecting to a power outlet, DO NOT remove the grounding prong. Please ensure grounding prongs are NEVER REMOVED.

Protect the power cord from being treaded upon or pinched, particularly at the plug, and at the point where it emerges from the equipment. Ensure that the power outlet is located near the equipment so that it is easily accessible.

Only use attachments/accessories specified by the manufacturer.

When a cart is used, use with caution when moving the cart/equipment combination to avoid injury from tipping over.

Disconnect the power plug from the AC outlet if the device is not being used for a long period of time.

Refer all servicing to qualified service personnel. Service will be required when the unit has been damaged in any way, such as:

ͫif the power supply cord or plug is damaged

ͫif liquid is spilled onto or objects fall in the unit

ͫif the unit is exposed to moisture

ͫif the unit does not operate normally or has been dropped

NOTICE: LISTENING THROUGH EAR-/HEADPHONES AT A HIGH VOLUME FOR EXTENDED PERIODS CAN CAUSE HEARING DAMAGE/HEARING LOSS. When using ear-/headphones, adjust the volume to appropriate levels, or hearing damage may result.

NOTICE: THE MONITOR MAY OVERHEAT AND SHUTDOWN! If the device shuts down automatically, please turn on your monitor again. After rebooting, change your monitor's resolution and refresh rate. For details, please refer to the graphics card's user guide.

4

Contents

 

Safety Precautions.......................................................

3

Introduction.................................................................

7

Package Contents....................................................................................................

7

Product Overview - VA2732-h.................................................................................

8

Front and Rear View................................................................................................

8

I/O Ports ..................................................................................................................

8

Product Overview - VA2732-mh..............................................................................

9

Front and Rear View................................................................................................

9

I/O Ports ..................................................................................................................

9

Product Overview - VA2732-mhd.........................................................................

10

Front and Rear View..............................................................................................

10

I/O Ports ................................................................................................................

10

Initial Setup...............................................................

11

Installing the Stand................................................................................................

11

Wall Mounting......................................................................................................

12

Using the Security Slot..........................................................................................

13

Making Connections...................................................

14

Connecting to Power.............................................................................................

14

Connecting External Devices - VA2732-h..............................................................

15

Connecting External Devices - VA2732-mh...........................................................

16

Connecting External Devices - VA2732-mhd.........................................................

17

Using the Monitor......................................................

18

Adjusting the Viewing Angle.................................................................................

18

Tilt Angle Adjustment............................................................................................

18

Turning the Device On/Off....................................................................................

19

Quick Menu............................................................................................................

20

Hot Keys.................................................................................................................

21

Configuring the Settings........................................................................................

23

General Operations................................................................................................

23

On-Screen Display (OSD) Menu Tree - VA2732-h..................................................

25

On-Screen Display (OSD) Menu Tree - VA2732-mh / VA2732-mhd.......................

28

5

Appendix...................................................................

32

Specifications........................................................................................................

32

Glossary.................................................................................................................

34

Troubleshooting....................................................................................................

38

Maintenance.........................................................................................................

40

General Precautions...............................................................................................

40

Cleaning the Screen...............................................................................................

40

Cleaning the Case...................................................................................................

40

Regulatory and Service Information...........................

41

Compliance Information.......................................................................................

41

FCC Compliance Statement....................................................................................

41

Industry Canada Statement...................................................................................

41

Declaration of RoHS2 Compliance.........................................................................

42

Indian Restriction of Hazardous Substances..........................................................

43

Product Disposal at End of Product Life.................................................................

43

Copyright Information...........................................................................................

44

Customer Service...................................................................................................

45

Limited Warranty...................................................................................................

46

Mexico Limited Warranty......................................................................................

49

6

Introduction

Package Contents

Monitor

AC/DC Power Adapter

Power cord

Video cable

Quick start guide

NOTE: The power cord and video cables included in your package may vary depending on your country. Please contact your local reseller for more information.

7

Product Overview - VA2732-h

Front and Rear View

I/O Ports

HDMI VGA

1

2

3

1. HDMI (v. 1.4)

2. VGA

3. DC IN

NOTE: For more information about the 1(«)/2/3/4/5() key and its functions,

refer to “Hot Keys” on page 21.

8

Product Overview - VA2732-mh

Front and Rear View

I/O Ports

HDMI VGA

 

1

2

4

3

1.

HDMI (v. 1.4)

2. VGA

3.

DC IN

4.

Audio In

 

 

 

NOTE: For more information about the 1(«)/2/3/4/5() key and its functions,

refer to “Hot Keys” on page 21.

9

Product Overview - VA2732-mhd

Front and Rear View

I/O Ports

HDMI VGA

5

1

 

 

2

4

3

1.

HDMI (v. 1.4)

2.

VGA

3.

DC IN

 

4.

Audio In

5.

DisplayPort (v. 1.2)

 

 

NOTE: For more information about the 1(«)/2/3/4/5() key and its functions,

refer to “Hot Keys” on page 21.

10

Initial Setup

Installing the Stand

1

2

3

4

NOTE: Always place the device on a flat, stable surface. Failure to do so may cause the device to fall and damage the device and/or result in personal injury.

11

Wall Mounting

NOTE: Only use UL Certified wall mount kits.

100 mm

<![if ! IE]>

<![endif]>mm 100

Refer to the table below for the standard dimensions for wall mount kits.

Maximum

Hole pattern

Interface Pad

Pad Hole

Screw Specification

Loading

(W x H)

(W x H x D)

 

& Quantity

14 kg

100 x 100 mm

115 x 115 x 2.6 mm

Ø 5 mm

M4 x 10 mm

4 pieces

 

 

 

 

NOTE: Wall mount kits are sold separately. To obtain a wall mounting kit,

contact ViewSonic® or your local dealer.

1.Turn off the device and disconnect all cables.

2.Place the device on a flat, stable surface with the screen facing down.

3.Remove the monitor stand.

1

2

4.Attach the mounting bracket to the VESA mounting holes at the rear of the device. Then secure it with four (4) screws (M4 x 10 mm).

5.Follow the instructions that come with the wall mounting kit to mount the monitor onto the wall.

12

Using the Security Slot

To help prevent the device from being stolen, use a security slot locking device to secure the device to a fixed object.

Below is an example of setting up a security slot locking device on a table.

13

Making Connections

This section guides you on how to connect the monitor with other equipment.

Connecting to Power

1.Connect the power cord to the power adapter.

2.Connect the power adapter to the DC IN jack at the rear of the device.

3.Connect the power cord plug to a power outlet.

2

3

 

 

1

14

Connecting External Devices - VA2732-h

HDMI

HDMI

VGA

VGA

15

ViewSonic VS18231, VA2732-MH, VA2732-MHD, VA2732-MHD-2 Users manual

Connecting External Devices - VA2732-mh

HDMI

HDMI

VGA

VGA

16

Loading...
+ 36 hidden pages