Operating Instructions
VEGAMET 614 S4
Level and Pressure
CONNECT
12
on
614 S4
%
100
+
-
OKESC
Ser.No.
12345678
out
in
Safety information, Note Ex area
Safety information
Please read this manual carefully, and also take
note of country-specific installation standards
(e.g. the VDE regulations in Germany) as well
as all prevailing safety regulations and accident prevention rules.
For safety and warranty reasons, any internal
work on the instruments, apart from that involved in normal installation and electrical connection, must be carried out only by qualified
VEGA personnel.
2 VEGAMET 614 S4
Note Ex area
Please note the attached safety instructions
containing important information on installation
and operation in Ex areas.
These safety instructions are part of the operating instructions manual and come with the Ex
approved instruments.
Product description
Technical data
Meas. data input VEGAMET 614 S4
Number 1 input
Kind of input active two-wire input, analogue (sensor is
powered by VEGAMET)
Range 4 … 20 mA
Possible sensors (loop powered) capacitive electrodes, pressure transmitters,
process pressure transmitter,
differential pressure transmitter
Voltage
U ³ 22 V
(for connection of safety barrier type 145)
Further technical data like VEGAMET 614
Wiring plan
Sensor
+- +-
12 34
56 78
Current
output
DISBUS
output
Voltage
output
+- +-
910 1112
17 18 19 20 21 22
+-
L1
N
Power supply
Fail
safe
relay
13 14 15 16
23 24 25 26 27 28
Level
Level
relay 1
relay 2
VEGAMET 614 S4 3
VEGA Grieshaber KG
Am Hohenstein 113
D-77761 Schiltach
Phone (07836) 50-0
Fax (07836) 50-201
E-Mail info@de.vega.com
www.vega.com
ISO 9001
All statements concerning scope of delivery, application, practical
use and operating conditions of the sensors and processing systems correspond to the information available at the time of printing.
Technical data subject to alterations
March 2001
Loading...