Vaddio PTZCAM 70 User Manual

Cameras and Electronics for Integrators

Installation and User Guide

Vaddio PTZCam 100

PTZ Camera Kit

• Part# 999-2100-100 (NTSC)

• Part# 999-2100-101 (PAL)

Based on the Sony® OEM camera EVI-D100C/S (NTSC and PAL) Includes:

• Sony EVI-D100C/S Pan/Tilt/Zoom Camera (Platinum Gray)

• Vaddio IR Remote Commander

• Power Supply with Power Cable

• PAL version is shipped with Euro power cable

Vaddio PTZCam 70

PTZ Camera Kit

• Part# 999-2100-070 (NTSC)

• Part# 999-2100-071 (PAL)

Based on the Sony OEM camera EVI-D70C/W (NTSC and PAL)

Includes:

• Sony EVI-D70C/W Pan/Tilt/Zoom Camera (Platinum White)

• Vaddio IR Remote Commander

• Power Supply with Power Cable

• PAL version is shipped with Euro power cable

Full-Length Manuals:

For full-length technical and operation guides, please refer to the Vaddio website at www.vaddio.com and download the supplied PDFs for the camera of choice. These manuals are written and supplied by Sony Corporation, Inc.

Declaration of Conformity:

Sony Corporation, Inc. is responsible for the FCC and CE testing and EC Declaration of Conformity for Safety, EMI, Immunity and Compliance. This product is to be used with the supplied UL listed or CE rated EN60950 and/or IEC60950 applied power supply, rated at 12 VDC and at least 1.1 Amp, Class 2 power supply, or limited power sources. For questions regarding the Declaration of Conformance, you may call Sony’s Business Information Center, 1-800-686-SONY, or write to Sony Customer Information Services Center, 6900-29 Daniels Parkway, PMB 330, Fort Meyers, FL 33912.

Installation Notes:

• Do not grasp the camera head while carrying the camera.

• Do not turn the camera head manually.

• Use a tripod or mounting screw not to exceed the ISO standard length of 4.5mm +

standard length of 0.197 inches.

• To prevent fire of shock hazard, do not expose to rain or moisture.

• When discarding the camera, for environmental reasons, take out the lithium battery and recycle

appropriately.

• Please refer to the Sony published documentation for all directions of safe operation, disclaimers and warnings regarding use and misuse, as well as, all express warranties of merchantability.

ⓒ2005 Vaddio - All Rights Reserved. Reproduction in whole or in part without written permission is prohibited. Specifications and pricing subject to change. Vaddio is a registered trademark of Vaddio. All other trademarks are property of their respective owners.

Form Number 341-272 Rev. A Page 1 of 2

0.2mm or ASA

Installation and User Guide - Continued

CARE AND CLEANING

OPERATING AND STORAGE CONDITIONS

WARRANTY INFORMATION

The cameras were designed, built and tested for use indoors only. Use only the powe supply provided with the cameras. Use of any unauthorized power supply will void an and all warranties.

Do not attempt to take the cameras apart. There are no user-serviceable components inside.

• Do not spill liquids onto the camera.

• Keep this device away from food and liquid.

• Avoid touching the lens.

• For smears or smudges, clear any dust with a blower and wipe stains with a

glass cleaner and clean, soft cloth.

• To clean exterior of camera, wipe with a clean soft cloth. Do not use abrasive chemicals.

Do not store or operate the cameras under the following conditions for any circumstance:

• Temperatures above 40°C (104°F) or temperatures below 0°C (32°F)

• High humidity, dusty, condensing or wet environments

• In inclement weather or under severe vibration

Hardware* Warranty - One year limited warranty on all parts. Vaddio warrants this product against defects in materials and workmanship for a period of one year from the day of purchase if Vaddio receives notice of such defects during the warranty. They will, at its option, repair or replace products that prove to be defective. See Warranty and RMA Policy documentation.

Exclusions - The above warranty shall not apply to defects resulting from: improper or inadequate maintenance by the customer, customers applied software or interfacing, unauthorized modifications or misuse, operation outside the normal environmental specifications for the product, use of the incorrect power supply, or improper site operation and maintenance.

Vaddio Customer service – Vaddio will test, repair, or replace the product or products without charge if the unit is under warranty. If the product is out of warranty, Vaddio will test then repair the product or products. The cost of parts and labor charge will be estimated by a technician and confirmed by the customer prior to repair. All components must be returned for testing as a complete unit. Vaddio will not accept responsibility for shipment after it has left the premises.

Vaddio Technical support - Vaddio technicians will determine and discuss with the customer the criteria for repair costs and/or replacement. Vaddio Technical Support can be contacted through one of the following resources: e-mail support at support@vaddio.com or online at

Return Material Authorization (RMA) Number - Before returning a product for repair or replacement request an RMA from Vaddio’s technical support. Provide a technician with a return phone number, e-mail address, shipping address, and product serial numbers. Describe the reason for repairs or returns as well as the date of purchase. Include your assigned RMA number in all correspondence with Vaddio. Write your assigned RMA number on the outside of the box when returning the product.

Voided warranty – The warranty does not apply if the original serial number has been removed or if the product has been disassembled or damaged through misuse, accident, modifications, or unauthorized repair.

Shipping and handling - Vaddio will not pay for inbound shipping transportation or insurance charges or accept any responsibility for laws and ordinances from inbound transit. Vaddio will pay for outbound shipping, transportation, and insurance charges all items under warranty but will not assume responsibility for loss and/or damage by the outbound freight carrier.

• If the return shipment appears damaged, retain the original boxes and packing material for inspection by the carrier.

Products not under warranty - Payment arrangements are required before outbound shipment for all out of warranty products.

*Vaddio manufactures its hardware products from parts and components that are new or equivalent to new in accordance with industry standard practices.

o Contact your carrier immediately.

www.vaddio.com.

Form Number 341-272 Rev. A Page 2 of 2