Vaddio PreVIEW Triple 5.6 Monitor User Manual

Installation and User Guide

Camera and Electronic Products for Integrators

VADDIO™ PREVIEW™ TRIPLE 5.6 LCD RACK MOUNT MONITOR

PreVIEW Triple 5.6 (Part Number 999-5500-003)

PreVIEW Triple 5.6 OVERVIEW:

The Vaddio PreVIEW Triple 5.6 LCD Rack Mount Monitor features three 5.6” high resolution active matrix LCD Monitors for exceptional video definition and color handling. The PreVIEW Triple 5.6 is a robust preview monitor solution equipped with three 960 x 234 resolution LCDs for previewing details and has brightness, contrast and color controls for fine tuning the three video displays. Each of the LCD panels on the Triple 5.6 have their own input and amplified loop through on BNC connectors for ease of configuring video systems. Constructed of heavy gauge aluminum and steel, the enclosure is both tough and attractive and can be a tilted ± 25° for setting up optimum viewing angles when installed in standard racks. The inputs are set-up for auto recognition of NTSC and PAL video formats and unlike many of the rack mount LCD monitors available today, all of the Vaddio PreVIEW Monitors are both FCC and CE certified. The price/performance and overall value of the Vaddio PreVIEW Series LCD Rack Mount Monitors is unmatched in today’s market.

UNPACKING

Each PreVIEW Triple 5.6 system contains the following items, please unpack and identify the following parts: One (1) PreVIEW Triple 5.6 Rack Mount LCD Monitor, One (1) 12 VDC, 3.8 Amp Power Supply, AC Cord Set with US type and Euro type connector and Documentation.

Figure 2: PreVIEW Triple 5.6 (Simulated video feeds - Photographs courtesy of the Hubble Space Telescope)

Figure 3:

Back panel of PreVIEW Triple 5.6 showing 2-BNC connectors (in & out) per LCD panel and 12VDC power connector

TECHNICAL SPECIFICATIONS

Specification Vaddio PreVIEW Triple 5.6 LCD Rack Mount Monitor

Displays Three (3) 5.6” Diagonal LCD Panels Panel Resolution 960 x 234 Active Area 4.46” (113.28mm) x 3.34” (84.71mm) Dot Pitch 0.118mm x 0.362mm Dot Pitch Brightness and Contrast Ratio 330 (cd/m2) Brightness, 250:1 Contrast Ratio Video Signals NTSC & PAL, auto-recognition Video Inputs Three (3) on BNC Connectors, 1 V p-p, 75 ohm Video Outputs Looping Outputs (active components) on three (3) BNC Connectors Dimensions 19.125” (48.58cm) W x 5.25” (13.34cm) x 2.75” (6.985cm) D Front Panel Controls Master On/Off Switch; Individual Color, Brightness and Contrast Controls Compliance FCC and CE (carries both marks)

Figure 1:

The PreVIEW Triple 5.6 monitor in a 3RU enclosure is FCC and CE certified and carries the FCC and CE marks.

PreVIEW Triple 5.6

Intended Use:

Before operating the Vaddio PreVIEW Series LCD Rack Mount Monitors, please read the documentation thoroughly. The systems were designed, built and tested for use indoors, and with the provided power supply. The use of a power supply other than the one provided or outdoor operation has not been tested and could damage the device and/or create a potentially unsafe operating condition.

Save These Instructions:

The information contained in this manual will help you install and operate your PreVIEW system. If these instructions are misplaced, Vaddio keeps copies of Specifications, Installation and User Guides and most pertinent product drawings for the Vaddio product line on the Vaddio website. These documents can be downloaded from www.vaddio.com

Important Safeguards:

 Read and understand all instructions before using. Do not operate any device if it has been dropped or damaged. In this case, a

Vaddio technician must examine the product before operating. To reduce the risk of electric shock, do not immerse in water or other liquids and avoid extremely humid conditions and environments.

 The LCD panels are covered with a thin protective film. Remove this film by carefully lifting the film at a corner and carefully peel back.

Do not scratch or apply pressure to the LCD surface. Scratched, cracked or broken LCD panels are not covered under warranty.

 Use all four screws when racking the PreVIEW series monitors. The tilting mechanism requires four screws for proper operation.  The video inputs are 75 ohm and the looping outputs are active and require power to output the signal.

Use only the power supply provided with the PreVIEW LCD Rack Mount Monitor system. Use of any unauthorized power supply will void any and all warranties.

FCC Part 15 Compliance and CE Declaration of Conformity

FCC Part 15 Compliance

This product is herewith confirmed and found to comply with the requirements set up by ANSI C63.4 & FCC PART 15 regulations for the evaluation of electromagnetic compatibility. This Device complies with Part 15 of the FCC rules Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference including interference that may cause undesired operation of the device.

Standards:

FCC Part 15:2005, Subpart B, Class B ANSI C63.4:2003 CISPR 22:1997+A1:2000+A2:2002 CISPR 16-1:2003

European Compliance

This product meets the requirements for the below standards and hence fulfills the requirements of the EMC Directive 89/336/EEC as amended by Directives 92/31/EEC and 93/68/EEC within the CE Marking Requirement.

Standard(s) To Which Conformity Is Declared:

EN55022: 1998+A1:2000+A2:2003 Class B EN61000-3-2: 2000 EN61000-3-3: 1995+A1:2001 EN55024: 1998+A1:2001+A2:2003 IEC61000-4-2: 1995+A1:1998+A2: 2000 IEC61000-4-3: 2002 IEC61000-4-4: 2004 IEC61000-4-5: 1995+A1:2000 IEC61000-4-6: 1996+A1:2000 IEC61000-4-8: 1993+A1:2000 IEC61000-4-11: 1994+A1:2000

HARDWARE WARRANTY:

Please see the Vaddio website at http://www.vaddio.com Warranty covers the policies and procedures of the Hardware Warranty, Exclusions, Customer Service, Technical Support, Return Material Authorizations (RMA), Voided Warranty, Shipping and Handling and Products Not Under Warranty. The Vaddio Warranty Statement supercedes all other published warranty statements in content and coverages. Vaddio Technical Support can be contacted through the Vaddio website or through e-mail support at mailto:support@vaddio.com

for the Vaddio Statement of Warranty for all Vaddio Products. The Statement of

free of charge.

Toll Free: 800-572-2011 ▪ Phone: 763-971-4400 ▪ FAX: 763-971-4464

www.vaddio.com

©2008 Vaddio - All Rights Reserved. Reproduction in whole or in part without written permission is prohibited. Specifications and pricing are subject to change without notice. Vaddio and PreVIEW are registered trademarks of Vaddio. Document 010308-56 Rev. A.