Vaddio OneLINK HDMI Specifications
Tech Spec
OneLINK HDMI
Extension System for HDBT Cameras
North America: 999-1105-043
Europe and UK:999-1105-143
Australia and New Zealand: 999-1105-943
Features
n Video, power, network, and control on a single Cat-5e(or better)cable
n Distances of up to 328’ (100m).
n Works with RoboSHOT™ 20 UHD and other HDBaseT™ cameras
n Simple, economical, fast installations
n Bidirectional control via Ethernet and RS-232
n Transmits and receives uncompressed HDMI
n Compatible Vaddio rack mounts are available
Back Panel
®
video up to 1080p/60
From the left:
n Power Input Jack – EIA-J04 power connector with positive center for use with supplied 48VDC, 1.36A power
supply.This power jack supplies power to the OneLINK system.
n OneLINK Interface Port – Shielded RJ-45 jack for connecting a single Cat-5e (or better) cable to the camera.
This bidirectional connection carries video, RS-232 and IP-based control, and 12 VDC power.
n HDMI Output – Provides HDMI signal from the camera.
n RS-232 port – Connect to a camera controller to manage the connected camera using Vaddio's modified
VISCA protocol.
n IR Forwarding – 3-pin Phoenix-style connector to forward IR signals from the camera, if available.Modulated
and non-modulated outputs provided.
n Network IP Port – Ethernet port for camera control or access to the OneLINK web interface.
What's Included
n OneLINK HDMI interface
n 48 VDC, 1.36 A switching power supply
n AC cord set(s)
n Quick Start Guide for OneLINK
Document Number 342- 1221 Rev A – July 2016
Tech Spec for OneLINK HDMI Extension System for HDBT Cameras
Basic Connections
Here is a fairly simple way to connect a RoboSHOT 20 UHDcamera (shown) or other HDBTcamera using the
OneLINK system. This example also shows a ProductionVIEW PCC connected directly to the OneLINK system
via RS-232, with a PCC Premier camera controller also able to control the camera from elsewhere on the network.
Specifications
Capabilities
Compatible cameras RoboSHOT 20 UHD and other
HDBT cameras
Power to camera 12 VDC, 3 Amp OneLINK power supply 48 VDC, 1.36 Amp
Maximum cable length 328 ft (100m) using Cat-5e cable; shielded Cat-6 recommended where EMI/RF interference is an
issue
Video output from camera HDMI resolutions up to
1080p/60
Physical and Environmental
Height
Width
Depth
Weight
1.72 in. (44 mm)/1U
8.375 in. (213 mm)/half-rack
6.00 in. (152 mm)
1.55 lbs. (703 g)
Operating temperatute
Operating humidity
Storage temperature
Storage humidity
0 °C to 40°C (32°F to 104°F)
20% to 80% RH (non-condensing)
0° to 40° C (32°F to 104°F)
20% to 80% RH (non-condensing)
Loading...