UVP Luminescence Calibration Standard User Manual

Luminescence Calibration Standard

User Instructions

UVP, LLC Ultra-Violet Products Ltd.

2066 W. 11th Street Unit 1, Trinity Hall Farm Estate
Upland, CA 91786 Nuffield Road, Cambridge CB4 1TG UK
Phone: [phone] Phone: [phone]
Fax: [phone] Fax: [phone]

Web Site: www.uvp.com

81-0353-01 Rev B

LED Calibration Standard 2

Introduction

UVP’s Luminescence Calibration Standard is used for experimental data validation as well as for the
calibration of light and the validation of measuring equipment, including cameras.

The Standard emits light over four orders of magnitude and can be used for any low light-measuring
camera, for quality control, or as a benchmark for between-experiment comparisons. For these purposes,
the Standard emits a broad spectrum green light.

The Luminescence Calibration Standard’s features include:

• Designed specifically for low-light calibration

• Extremely stable emission

• Broad-spectrum green light

• Descending light output of:

o Setting 1: 100%
o Setting 2: 10%
o Setting 3: 1%
o Setting 4: 0.1%

• Calibrated from the UVP factory for quantification purposes

Specifications

• Dimensions: 1.5”H x 2.125”W x 3.25”L

• Power Source: Standard 9V Alkaline Battery

• UVP Part Number: 95-0571-01