UVP LCD Screen User Manual

LCD Screen

Installation and User Instructions

PhotoDoc-It Imaging System with LCD Screen

UVP, LLC Ultra-Violet Products Ltd.
2066 W 11th Street, Upland, CA 91786 Unit 1, Trinity Hall Farm Estate, Nuffield Rd.
Tel: [phone] Cambridge CB4 1TG UK
Fax: [phone] Tel: [phone] / Fax: [phone]

Web Site: www.uvp.com

81-0287-01 Rev STD

1. Remove the two (2) plugs from the

2. The LCD mount has two holes.

3. Adjust the angle of the screen

4. Plug in the universal power supply. The plug pops out allowing substitution for other
Plugs/Holes

Screw location

Introduction

The LCD screen connects to the UVP PhotoDoc-It digital color camera f or live image preview.
These instructions discuss assembly of the LCD to the PhotoDoc-It Imaging System.

Assembling the LCD Screen

front of the hood. From inside the
hood, push the plugs out.

NOTE: If the hood does not have the
plugs/holes it is necessary to drill holes
in hood. Refer to Addend um A drawing
for instructions.

Insert a screw and washer into
each hole. Slide the screws into the
hood. Tighten screws with nuts
inside the hood (do not over
tighten).

using the two knobs:
Outside knob adjusts the screen up

or down.
Center knob adjusts the screen left

or right.

Center knob

Outside knob

plug types.

LCD Screen Page 2

5. Connect the cables as shown in

6. Insert the black connector between

7. Connect the LCD screen cable to

the photograph. This is the audio
video (A/V) cable – five pin to the
screen cable.

the two yellow connectors.

the camera cable.

8. After installing the camera on the
hood per the PhotoDoc-It Imaging
System instruction s, connect the
camera cable to the A/V out
camera port accessible on the side
of the camera.

LCD Screen Page 3

th

Street, Upland,

CA 91786 USA

Hall, Nuffield Road, Cambridge CB4 1TG UK

Operating the LCD Screen

Once the LCD screen is connected to the camera, push the far right button on the LCD panel to
operate the screen.

Care and Cleaning

Carefully wipe the screen with a soft cloth. Do not use any cleaning products.

Maintenance, Repair and Technical Assistance

UVP offers technical support for all of its products. If you have any questions about the product’s
use, operation or repair, please contact our offices at the locations below.

Note: A Returned Goods Authorization (RGA) number must be obtained from UVP Customer
Service before returning any product.

Contact UVP’s Customer Service based on your location:

If you are in North America, South America,
East Asia or Australia:

If you are in Europe, Africa, the Middle East or
Western Asia:

Call [phone] or [phone], and ask

for Customer Service during regular business
days, between 7:00 a.m. and 5:00 p.m. PST.

E-Mail your message to: [e-mail]

Call [phone], and ask for Customer
Service during regular business days, between 8:00

a.m. and 5:30 p.m.
E-Mail your message to: [e-mail]

Warranty

UVP, LLC warrants its products to be free of detects in materials and workmanship for a period of
one (1) year from date of purchase. The foregoing warranty of UVP shall be of no force and effect if
buyer has modified or damaged the product. Tubes and filters are warranted for 90 days.

All warranties or merchantability and fitness for any purpose and all other warranties, expressed or
implied, except those expressly set forth herein, are deemed waived and excluded.

UVP’s duty under the warranty is limited to replacement and/or repair of the defective part at the
option of UVP, LLC. UVP shall not be liable for any expenses or damages incurred by the
purchaser except as expressly set forth herein, and in no event shall UVP be liable for any special,
incidental or consequential damages of any kind. This warranty does not supersede any statutory
rights that may be available in certain countries.

UVP … Providing Quality Products for the Researcher Since 1932

From its start in 1932, UVP has become a story of growth and value fulfillment. Today, UVP services the
needs of science, industry and education throughout the world. A special significance of UVP research and
development arises from our constant communication with customers. UVP continually invites your
comments toward the improvement of UVP products or the development of custom types of ultraviolet light
sources. UVP will work with you through development and production of a product that meets your specific
needs. From all of us at UVP, Thank You.