UVP C-10 User Manual
INSTRUCTIONS FOR ASSEMBLY
INSTRUCTIONS FOR ASSEMBLY
MODEL C-10 SERIES
CHROMATO-VUE® CABINET
1. Lift flexible eyepiece (A) and cover assembly (D) out through top of cabinet.
MODEL C-10 SERIES
CHROMATO-VUE® CABINET
1. Lift flexible eyepiece (A) and cover assembly (D) out through top of cabinet.
2. Slip lamp well (E) portion of cover assembly over rim at back of cabinet until
flush with top. Apply enough pressure toward front portion to snap over rim.
Ensure that cover assembly is flush with top on all sides.
3. Slip flexible eyepiece over rim above contrast control filter (B) with notched
portion facing front of cabinet.
4. Place the Mineralight® lamp into the molded lamp well with power cord
placed to the left. The Chromato-Vue cabinet is now ready to use.
5. Lift light curtain (C) when placing or positioning materials; leave in closed
position when in use to block external light from entering the cabinet.
2. Slip lamp well (E) portion of cover assembly over rim at back of cabinet until
flush with top. Apply enough pressure toward front portion to snap over rim.
Ensure that cover assembly is flush with top on all sides.
3. Slip flexible eyepiece over rim above contrast control filter (B) with notched
portion facing front of cabinet.
4. Place the Mineralight® lamp into the molded lamp well with power cord
placed to the left. The Chromato-Vue cabinet is now ready to use.
5. Lift light curtain (C) when placing or positioning materials; leave in closed
position when in use to block external light from entering the cabinet.
81-0008-01 Rev J
Fax: +44(0)1223 420156
Unit 1, Trinity Hall Farm Estate, Nuffield Road,
(909) 946-3197 / Fax: (909) 946-3597
Corporate Headquarters: UVP, LLC
Mineralight and Chromato-Vue are registered trademarks of UVP, LLC
For additional information on UVP’s products, go to www.UVP.com
Cambridge CB4 1TG UK / Tel: +44(0)1223 420022
European Operations: Ultra-Violet Products Ltd
2066 W. 11th Street Upland, CA 91786 / Tel: (800) 452-6788
81-0008-01 Rev J
Fax: +44(0)1223 420156
Unit 1, Trinity Hall Farm Estate, Nuffield Road,
(909) 946-3197 / Fax: (909) 946-3597
Corporate Headquarters: UVP, LLC
Mineralight and Chromato-Vue are registered trademarks of UVP, LLC
For additional information on UVP’s products, go to www.UVP.com
Cambridge CB4 1TG UK / Tel: +44(0)1223 420022
European Operations: Ultra-Violet Products Ltd
2066 W. 11th Street Upland, CA 91786 / Tel: (800) 452-6788
Contrast Control Filter: 38-0013-01
Eyepiece: 23-0036-01
Replacement Parts:
block out any outside light.
materials; leave the curtain in the closed position when in use to
ready to use. Lift light curtain (C) when placing or positioning
firmly holds the lamp in place. The Chromato-Vue cabinet is now
4. Place the portable lamp in the lamp support bracket. This bracket
C-10P is as follows:
numbers 1 through 3 on the previous page. Instruction number 4 for the
To assemble the C-10P, follow the C-10 Cabinet Series instructions
bracket is to hold the portable lamp securely in place.
addition of a lamp support bracket on the C-10P. The purpose of the
The difference between the C-10, C-10E and C-10P Cabinets is the
CHROMATO-VUE CABINET
Contrast Control Filter: 38-0013-01
Eyepiece: 23-0036-01
Replacement Parts:
block out any outside light.
materials; leave the curtain in the closed position when in use to
ready to use. Lift light curtain (C) when placing or positioning
firmly holds the lamp in place. The Chromato-Vue cabinet is now
4. Place the portable lamp in the lamp support bracket. This bracket
C-10P is as follows:
numbers 1 through 3 on the previous page. Instruction number 4 for the
To assemble the C-10P, follow the C-10 Cabinet Series instructions
bracket is to hold the portable lamp securely in place.
addition of a lamp support bracket on the C-10P. The purpose of the
The difference between the C-10, C-10E and C-10P Cabinets is the
CHROMATO-VUE CABINET
C-10P
C-10P
Loading...