Page 1
B-Control and A-Control
2
on Washer-Extractors
Quick Reference Guide
WASH
ADD
BLEACH
RINSE
SPIN
DOOR
CLEAN
FILTER
START
NORMAL
HOT
LIGHT SOIL
HOT
HEAVY SOIL
HOT HOT
STAINED
HOT
PERM PRESS
HOT
TM
VISA
WARM
UNIFORMS
DELICATE
COLD
CHM522N
CHM52
www.comlaundry.com
CHM479R
Part No. 4-07-137
April 2007
Page 2
Page 3
Table of
Contents
B-Control ............................................................................................. 3
Entering Program Mode ....................................................................... 3
Programming Vend Price ..................................................................... 3
Displaying Estimated Time or Actual Time......................................... 4
Changing Cycle Time ........................................................................... 5
Wash 1 – Wash 4 ............................................................................. 7
Rinse 1 – Rinse 4 ............................................................................. 8
Enabling Rapid Advance ...................................................................... 9
Exit Program Mode............................................................................... 10
A-Control............................................................................................. 11
Entering Program Mode ....................................................................... 11
Set Additional Vend Amount for Extra Wash...................................... 11
Setting One Global Vend Price or Six Vend Prices ............................. 13
Displaying Estimated Time or Actual Time......................................... 14
One Global Vend Price (1PR) Amount ................................................ 15
Time of Day Special Promotional Pricing Vend Amount.................... 16
Exit Program Mode............................................................................... 18
© Copyright 2007, Alliance Laundry Systems LLC
All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any
means without the expressed written consent of the publisher.
4-07-137
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
1
Page 4
Notes
2
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
4-07-137
Page 5
B-Control
Entering Program Mode
1. Open machine lid.
2. Locate Program/Run switch on the computer board. This is accessed through a cutout in the metal control unit cover. This switch protrudes from the rear of the electronic control unit cover.
3. Flip switch to the left (as seen from front of machine) to enter Program Mode.
4. Display will show “0000” or temperature (depending on version of the control).
Programming Vend Price
NOTE: The coin drawer must be installed and locked before menu can be accessed.
1. Enter Program Mode. Refer to Entering Program Mode.
2. When display shows “0000” or a temperature, vend is ready to be edited.
WASH
ADD
BLEACH
RINSE
SPIN
DOOR
CLEAN
FILTER
WASH
ADD
BLEACH
RINSE
SPIN
DOOR
CLEAN
FILTER
START
START
NORMAL
HOT
LIGHT SOIL
HOT
HEAVY SOIL
HOT HOT
STAINED
HOT
NORMAL
HOT
LIGHT SOIL
HOT
HEAVY SOIL
HOT HOT
STAINED
HOT
PERM PRESS
HOT
TM
VISA
WARM
UNIFORMS
DELICATE
COLD
PERM PRESS
HOT
TM
VISA
WARM
UNIFORMS
DELICATE
COLD
3. Press * keypad. Display shows machine model size.
CHM522N
4. Press START until display reads “Strt”/“Ant” , then a number such as 150. This means vend required to operate the machine is 150 cents.
CHM522N
4-07-137
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
3
Page 6
B-Control
WASH
ADD
BLEACH
RINSE
SPIN
DOOR
CLEAN
FILTER
WASH
ADD
BLEACH
RINSE
SPIN
DOOR
CLEAN
FILTER
START
START
NORMAL
HOT
LIGHT SOIL
HOT
HEAVY SOIL
HOT HOT
STAINED
HOT
NORMAL
HOT
LIGHT SOIL
HOT
HEAVY SOIL
HOT HOT
STAINED
HOT
PERM PRESS
HOT
TM
VISA
WARM
UNIFORMS
DELICATE
COLD
PERM PRESS
HOT
TM
VISA
WARM
UNIFORMS
DELICATE
COLD
5. Press (∧) or (∨) to change the vend price.
CHM522N
6. Press START (enter) keypad when correct.
CHM522N
Displaying Estimated Time or Actual Time
1. Enter Program Mode. Refer to Entering Program
2. Press * keypad. Display shows machine model
3. Press START until display reads “PtIM”/EtIM.”
WASH
ADD
BLEACH
RINSE
SPIN
DOOR
CLEAN
FILTER
WASH
ADD
BLEACH
RINSE
SPIN
DOOR
CLEAN
FILTER
START
START
NORMAL
HOT
LIGHT SOIL
HOT
HEAVY SOIL
HOT HOT
STAINED
HOT
NORMAL
HOT
LIGHT SOIL
HOT
HEAVY SOIL
HOT HOT
STAINED
HOT
PERM PRESS
HOT
TM
VISA
WARM
UNIFORMS
DELICATE
COLD
PERM PRESS
HOT
TM
VISA
WARM
UNIFORMS
DELICATE
COLD
CHM522N
Mode.
size.
CHM522N
4
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
4-07-137
Page 7
B-Control
NOTE: Selecting the "PtIM" option means the control will display a total cycle time based on the sum of the
programmed wash tumble, rinse tumble, and spin times only. The control will not allocate for, or display any
time associated with any of the wash or rinse fills.
Selecting the "EtIM" option means the control will display a total cycle time as the sum of the wash tumble,
rinse tumble, spin, and also the estimated fill times for any of the fills and drains in the wash or rinse
segments. The estimated time for each wash or rinse segment is based on the average of the previous five
fills.
WASH
ADD
BLEACH
RINSE
SPIN
DOOR
CLEAN
FILTER
WASH
ADD
BLEACH
RINSE
SPIN
DOOR
CLEAN
FILTER
START
START
NORMAL
HOT
LIGHT SOIL
HOT
HEAVY SOIL
HOT HOT
STAINED
HOT
NORMAL
HOT
LIGHT SOIL
HOT
HEAVY SOIL
HOT HOT
STAINED
HOT
PERM PRESS
HOT
TM
VISA
WARM
UNIFORMS
DELICATE
COLD
PERM PRESS
HOT
TM
VISA
WARM
UNIFORMS
DELICATE
COLD
4. Press (∧) or (∨) keypad to change “PtIM”/”EtIM”
selection.
CHM522N
5. Press START (enter) keypad when correct.
CHM522N
Changing Cycle Time
WASH
ADD
BLEACH
RINSE
4-07-137
SPIN
DOOR
CLEAN
FILTER
START
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
NORMAL
HOT
LIGHT SOIL
HOT
HEAVY SOIL
HOT HOT
STAINED
HOT
PERM PRESS
HOT
TM
VISA
WARM
UNIFORMS
DELICATE
COLD
1. Enter Program Mode. Refer to Entering Program Mode.
2. Press the (∧) keypad until display shows “CY01”.
CHM522N
5
Page 8
B-Control
WASH
ADD
BLEACH
RINSE
SPIN
DOOR
CLEAN
FILTER
WASH
ADD
BLEACH
RINSE
SPIN
DOOR
CLEAN
FILTER
WASH
ADD
BLEACH
RINSE
SPIN
DOOR
CLEAN
FILTER
START
START
START
NORMAL
HOT
LIGHT SOIL
HOT
HEAVY SOIL
HOT HOT
STAINED
HOT
NORMAL
HOT
LIGHT SOIL
HOT
HEAVY SOIL
HOT HOT
STAINED
HOT
NORMAL
HOT
LIGHT SOIL
HOT
HEAVY SOIL
HOT HOT
STAINED
HOT
PERM PRESS
HOT
TM
VISA
WARM
UNIFORMS
DELICATE
COLD
PERM PRESS
HOT
TM
VISA
WARM
UNIFORMS
DELICATE
COLD
PERM PRESS
HOT
TM
VISA
WARM
UNIFORMS
DELICATE
COLD
3. Press the (∧) or (∨) keypad until cycle to be edited
is displayed.
CHM522N
4. Press START (enter) keypad to select the cycle desired.
CHM522N
5. When display shows “CYx” (x=cycle number), press the START (enter) keypad. Display shows either “norN” (for normal agitation), or “Gent” (for gentle agitation).
WASH
ADD
BLEACH
RINSE
SPIN
DOOR
CLEAN
FILTER
START
NORMAL
HOT
LIGHT SOIL
HOT
HEAVY SOIL
HOT HOT
STAINED
HOT
PERM PRESS
HOT
TM
VISA
WARM
UNIFORMS
DELICATE
COLD
CHM522N
6. Press the (∧) or (∨) keypad to alter the selection, or
the START (enter) keypad to continue. Each cycle
can be set up for Normal agitation (12 seconds
forward, three seconds pause, 12 seconds reverse,
three seconds pause, repeat) or Gentle agitation
(three seconds forward, 12 seconds pause, three
seconds reverse, 12 seconds pause, repeat).
CHM522N
6
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
4-07-137
Page 9
B-Control
Wash 1 – Wash 4
NOTE: Programming a time other than “00” for Wash 1 will make the WASH indicator LED light while this
step is running, but NOT in Program Mode.
7. The main display shows “USH1” indicating you are in the Wash segment (number will reflect selected Wash cycle 1-4).
NORMAL
PERM PRESS
WASH
ADD
BLEACH
RINSE
SPIN
DOOR
CLEAN
FILTER
LIGHT SOIL
HEAVY SOIL
START
HOT
HOT
HOT HOT
STAINED
HOT
HOT
VISA
WARM
UNIFORMS
DELICATE
COLD
TM
CHM522N
9. Display shows agitation time during the step “00” (skips segment) or 2-30 minutes.
10. Enter 2-20 minutes for Wash 2 Agitation Time. If you want to skip Wash 2, enter “00”.
11. Enter 2-15 minutes for Wash 3 or Wash 4 Agitation Time. If you want to skip Wash 3 or Wash 4, enter “00”.
NOTE: Wash time is the time after the fill and before the drain and does not include spin time or time to
reach a programmed temperature (if machine configured for heat).
12. Press (∧) or (∨) keypad to alter the time.
NORMAL
PERM PRESS
8. Press START (enter) keypad.
WASH
ADD
BLEACH
RINSE
SPIN
DOOR
CLEAN
FILTER
LIGHT SOIL
HEAVY SOIL
START
HOT
HOT
HOT HOT
STAINED
HOT
HOT
VISA
WARM
UNIFORMS
DELICATE
COLD
TM
4-07-137
WASH
ADD
BLEACH
RINSE
SPIN
DOOR
CLEAN
FILTER
CHM522N
13. Press START (enter) when correct.
NORMAL
PERM PRESS
HOT
HOT
VISA
WARM
UNIFORMS
DELICATE
COLD
TM
CHM522N
LIGHT SOIL
HOT
START
HEAVY SOIL
HOT HOT
STAINED
HOT
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
7
Page 10
B-Control
Rinse 1 – Rinse 4
NOTE: Programming a time other than “00” for this step will make the RINSE indicator LED light while
this step is running, but NOT in Program Mode.
14. The main display shows “rIN1” indicating you are in the Rinse segment (number will represent Rinse cycle selected 1-4).
NORMAL
PERM PRESS
WASH
ADD
BLEACH
RINSE
SPIN
DOOR
CLEAN
FILTER
LIGHT SOIL
HEAVY SOIL
START
HOT
HOT
HOT HOT
STAINED
HOT
HOT
VISA
WARM
UNIFORMS
DELICATE
COLD
TM
CHM522N
16. Display shows the time for agitation during the step.
17. Enter 2-15 minutes for Rinse 1, Rinse 2, Rinse 3 or Rinse 4. Press “00” to skip a rinse step.
NOTE: Rinse time is the time after the fill and before the drain and does not include spin time.
18. Press (∧) or (∨) keypad to alter the time.
NORMAL
PERM PRESS
15. Press START (enter keypad).
WASH
ADD
BLEACH
RINSE
SPIN
DOOR
CLEAN
FILTER
LIGHT SOIL
HEAVY SOIL
START
HOT
HOT
HOT HOT
STAINED
HOT
HOT
VISA
WARM
UNIFORMS
DELICATE
COLD
TM
CHM522N
19. Press START (enter) when correct.
NORMAL
PERM PRESS
WASH
ADD
BLEACH
RINSE
SPIN
DOOR
CLEAN
FILTER
8
START
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
LIGHT SOIL
HEAVY SOIL
HOT
HOT
HOT HOT
STAINED
HOT
HOT
VISA
WARM
UNIFORMS
DELICATE
COLD
TM
CHM522N
4-07-137
Page 11
Enabling Rapid Advance
NOTE: Rapid Advance can only be used during a cycle operation.
1. Enter Program Mode. Refer to Entering Program Mode.
B-Control
WASH
ADD
BLEACH
RINSE
SPIN
DOOR
CLEAN
FILTER
WASH
ADD
BLEACH
RINSE
SPIN
DOOR
CLEAN
FILTER
WASH
ADD
BLEACH
RINSE
SPIN
DOOR
CLEAN
FILTER
START
START
START
NORMAL
HOT
LIGHT SOIL
HOT
HEAVY SOIL
HOT HOT
STAINED
HOT
NORMAL
HOT
LIGHT SOIL
HOT
HEAVY SOIL
HOT HOT
STAINED
HOT
NORMAL
HOT
LIGHT SOIL
HOT
HEAVY SOIL
HOT HOT
STAINED
HOT
PERM PRESS
HOT
TM
VISA
WARM
UNIFORMS
DELICATE
COLD
PERM PRESS
HOT
TM
VISA
WARM
UNIFORMS
DELICATE
COLD
PERM PRESS
HOT
TM
VISA
WARM
UNIFORMS
DELICATE
COLD
2. Press the (∧) or (∨) key until “Adv” or “noAd”
displays.
CHM522N
3. If “Adv” is set, control will advance to the next
step when (∧) keypad is pressed during a regular
cycle. If “noAd” is set, control cannot advance
during a regular cycle, but can advance during the
factory test cycle when (∧) keypad is pressed.
CHM522N
4. Press (∧) or (∨) keypad to the desired “Adv” or
“noAd” selection.
4-07-137
WASH
ADD
BLEACH
RINSE
SPIN
DOOR
CLEAN
FILTER
CHM522N
5. Press START (enter keypad).
NORMAL
PERM PRESS
HOT
HOT
VISA
WARM
UNIFORMS
DELICATE
COLD
TM
CHM522N
LIGHT SOIL
HOT
START
HEAVY SOIL
HOT HOT
STAINED
HOT
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
9
Page 12
B-Control
Exit Program Mode
1. Flip Program/Run switch back to the left as seen from the front of the machine.
10
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
4-07-137
Page 13
A-Control
Entering Program Mode
1. Open machine lid.
2. Locate Program/Run switch on the computer board. This is accessed through a cutout in the metal control unit cover. This switch protrudes from the rear of the electronic control unit cover.
3. Flip switch to the left (as seen from front of machine) to enter Program Mode.
4. Display will show “tSFL” or temperature (depending on version of control).
Set Additional Vend Amount for Extra Wash
1. Enter Program Mode. Refer to Entering Program Mode.
2. Press Rugs/Blanket Cold * for Domestic Models or Gentle 30’C* for International models.
CHM479R
CHM479R
CHM479R
CHM479R
3. Display shows model number. If incorrect model is
displayed, press Extra Wash (∧) keypad until
correct model is displayed.
CHM479R
4. Press START keypad when correct model is displayed.
CHM479R
4-07-137
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
11
Page 14
A-Control
CHM479R
5. Display shows “nOd1” for one second, “Add” for one second, and then the vend pice. The vend price displayed is for additional vend amount when Extra Wash is selected by the user
6. Press the Extra Wash (∧) keypad to increase the
vend price amount.
CHM479R
7. Press Extra Rinse/Reduced Spin (∨) to decrease
the vend price amount for the Extra Wash cycle.
CHM479R
CHM479R
CHM479R
8. Press START keypad when desired vend price amount is displayed.
CHM479R
9. Display shows “nOd2” for one second, “Add” for one second, and then the vended price. The vend price displayed is for additional vend amount when Extra Rinse (Domestic Models) or Reduced Spin (International Models) is selected by the user.
10. Press Extra Rinse/Reduced Spin (∨) keypad to
decrease the vend price amount for the Extra
Rinse/Reduced Spin cycle.
12
CHM479R
CHM479R
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
4-07-137
Page 15
11. Press START keypad when desired vend price amount is displayed.
CHM479R
CHM479R
Setting One Global Vend Price or Six Vend Prices
1. Press (∧) or (∨) keypad until “1 Pr” displays.
“1 Pr” means one global vend price for all cycles.
“6 Pr” means each cycle has a different vend price.
A-Control
CHM479R
CHM479R
CHM479R
CHM479R
2. Press (∧) or (∨) keypad to change type of vend
price.
CHM479R
3. Press START keypad when desired price is set.
CHM479R
4-07-137
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
13
Page 16
A-Control
Displaying Estimated Time or Actual Time
1. Enter Program Mode. Refer to Entering Program Mode.
2. Press (∧) or (∨) keypad until “PtIM”/“EtIM”
displays.
CHM479R
CHM479R
NOTE: Selecting the "PtIM" option means the control will display a total cycle time based on the sum of the
programmed wash tumble, rinse tumble, and spin times only. The control will not allocate for, or display any
time associated with any of the wash or rinse fills.
Selecting the "EtIM" option means the control will display a total cycle time as the sum of the wash tumble,
rinse tumble, spin, and also the estimated fill times for any of the fills and drains in the wash or rinse
segments. The estimated time for each wash or rinse segment is based on the average of the previous five
fills.
3. Press (∧) or (∨) keypad to change “PtIM”/“EtIM”
selection.
CHM479R
CHM479R
4. Press START (enter) keypad when correct.
CHM479R
CHM479R
NOTE: “PtIM” means control will not display remaining time in a cycle. “EtIM” means the control will
display estimated remaining time in a cycle.
14
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
4-07-137
Page 17
CHM479R
CHM479R
A-Control
5. Press (∧) or (∨) keypad to change “PtIM”/”EtIM”
selection.
CHM479R
6. Press START (enter) keypad when correct.
CHM479R
One Global Vend Price (1PR) Amount
NOTE: If “6 Pr” was selected in Setting One Global Vend Price or Six Vend Prices Section, this option is not
available. Special Promotional pricing also has to be enabled.
1. Enter Program Mode. Refer to Entering Program Mode.
2. Press (∧) or (∨) keypad until “Strt”/”Ant” displays.
The amount displayed is the vend price required to
start any cycle when the special promotional
pricing option is disabled.
CHM479R
CHM479R
3. Press (∧) or (∨) keypad to change the vend price.
4-07-137
CHM479R
CHM479R
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
15
Page 18
A-Control
4. Press START (enter) keypad when correct vend price is displayed.
CHM479R
CHM479R
Time of Day Special Promotional Pricing Vend Amount
NOTE: Global Vend price must be enabled.
1. Enter Program Mode. Refer to Entering Program Mode.
2. Press (∧) or (∨) keypad until “SPEC”, “Strt”, and
“Ant” displays. The amount displayed is the vend
price required to start any cycle when the special
promotional pricing is enabled.
CHM479R
CHM479R
3. Press (∧) or (∨) keypad to change the vend price.
CHM479R
CHM479R
NOTE: If “1 Pr” was selected and Special Promotional Pricing is disabled, this option is not available.
4. Press START (enter) keypad when desired coin value is displayed.
16
CHM479R
CHM479R
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
4-07-137
Page 19
CHM479R
CHM479R
A-Control
5. Display shows the current day of the week (“Sun”,
“nOn”, etc.). If the day is not correct, press (∧) or
(∨) keypad to change the current day.
CHM479R
6. Press START keypad when current day is displayed.
CHM479R
CHM479R
CHM479R
7. Display shows “HHnn” with “nn” flashing and
representing the minutes of the current time
(00-59). Press (∧) or (∨) keypad to change the
selection.
CHM479R
8. Display shows “HHXX” (XX will be minutes selected in previous step) with “HH” flashing and representing the hour , in military time (00-23).
9. Press (∧) or (∨) keypad to change the selection.
CHM479R
4-07-137
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
17
Page 20
A-Control
Exit Program Mode
CHM479R
10. Press START (enter) keypad when correct hour is displayed.
CHM479R
1. Flip Program/Run switch back to the left as seen from the front of the machine.
18
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
4-07-137
Loading...