Ubiquiti UAPOUTDOOR User Manual

Enterprise WiFi System

Model: UAP-Outdoor+

Introduction

Thank you for purchasing the Ubiquiti Networks™ UniFi™
Enterprise WiFi System. The UniFi Enterprise WiFi System
includes the UniFi Controller software, which allows you to
manage your wireless network using a web browser.

This Quick Start Guide includes the warranty terms and is for
use with the UniFi AP-HD, model UAP-HD. The UniFi AP can be
powered by any of the following:

• PoE Adapter (included)

• 48V, PoE 802.3af compliant switch

• Ubiquiti Networks TOUGHSwitch PRO, model TS-8-PRO
The UniFi AP also includes the necessary hardware for

mounting the unit on a wall or a pole.

Installation Requirements

• Flathead screwdriver (for pole-mounting)

• Drill and 6 mm drill bit (for wall-mounting)

• Phillips screwdriver

• Shielded Category 5 (or above) cabling should be used
for all outdoor wired Ethernet connections and should be
grounded through the AC ground of the PoE.

We recommend that you protect your networks from
brutal outdoor environments and devastating ESD
attacks with industrial-grade shielded Ethernet cable from


www.ubnt.com/toughcable

TERMS OF USE: Ubiquiti radio devices must be professionally installed. Shielded Ethernet
cable and earth grounding must be used as conditions of product warranty. TOUGHCable is
designed for outdoor installations. It is the customer’s responsibility to follow local country
regulations, including operation within legal frequency channels, output power, and Dynamic
Frequency Selection (DFS) requirements.

Package Contents

UniFi AP-HD Antennas (Qty. 2) Wall Mount Bracket

Metal Strap M2.9x20 Screws

48V, 0.5A

Power Cord UniFi Controller CD

PoE Adapter

System Requirements

• Microsoft Windows Vista, Windows 7, Windows 8, or


• Java Runtime Environment 1.6 (or above)

• Web Browser: Mozilla Firefox, Google Chrome, or Microsoft
Internet Explorer 8 (or above)

(Qty. 3)

with User Guide

M3x20 Screw

Anchors (Qty. 3)

Enterprise WiFi System

Models: UAP-HD

Quick Start

Guide

Network Topology Requirements

• A DHCP-enabled network for the AP to obtain an IP
address (wireless clients will also obtain IP addresses after
deployment)

• A management station computer running the UniFi
Controller software, located either onsite and connected to


Wireless

1

Uplinked

UAP

Wired UAP-HD

Wired UAP-PRO

Router

Wired UAP-Outdoor

or

On-Site

Management Station

1. Refer to the UniFi Enterprise WiFi System User Guide on the CD for
setting up wireless-linked APs.

All UniFi APs support off-site management controllers. See the User

Guide for setup details.

Sample Network Diagram

O-Site

Cloud/NOC

2

Hardware Overview

LED

LED Color Status

Flashing White

Steady White

Alternating
White/Blue

Quickly
Flashing Blue

Steady Blue

Steady Blue
with occasional
flashing

Initializing.

Factory default, waiting to be integrated.

Device is busy; do not touch or unplug it.
This usually indicates that a process such
as a firmware upgrade is taking place.

This is used to locate an AP.

When you click Locate in the UniFi
Controller software, the AP will flash. It
will also display the location of the AP on
the map.

Indicates the device has been successfully
integrated into a network and is working
properly.

Indicates the device is in an isolated state
(all WLANs are brought down until an
uplink is found).

Ports

Main

Secondary

Ethernet Port

(10/100 Mbps)

Secondary The Secondary Ethernet port is used for bridging.

Reset The Reset button serves two functions for the UniFi AP:

Restart Press and release the Reset button quickly.

•

Restore to Factory Default Settings Press and hold the

•
Reset button for more then five seconds.

Main The Main Ethernet port is used to connect the power

and should be connected to the LAN and DHCP server. Power
can be provided by any of the following:

• Included PoE adapter

• 48V, 802.3af compliant switch

• Ubiquiti Networks TOUGHSwitch PRO, model TS-8-PRO

Reset

Button

Ethernet Port

(10/100 Mbps)

Hardware Installation

The UniFi AP can be mounted to a wall or on a pole. Perform
the steps for the appropriate installation:

Wall Mount

To mount the AP on a wall, use the included Wall Mount
Bracket, Screws, and Screw Anchors.

1. Place the Wall Mount Bracket at the desired location on the
wall, with the one screw hole pointed towards the ground.

2. Use a pencil to mark the three holes on the wall.

3. Use a 6 mm drill bit to drill the holes in the wall.

4. Insert a Screw Anchor into each hole.

5. Secure the Wall Mount Bracket to the wall with the
self-tapping Screws.

6. Align the mounting tabs on the UniFi AP with the notches
on the Wall Mount Bracket, and slide the UniFi AP down
until it locks into place.

Pole Mount

To mount the UniFi AP on a pole, use the included Metal Strap:

1. Turn the screw on the Metal Strap counter-clockwise to
open the strap.

2. Straighten out the end of the Metal Strap and slide it
through the back of the UniFi AP.

3. Wrap the Metal Strap around the pole. Use a flathead
screwdriver to turn the screw clockwise and securely fasten
the strap to the pole.

Antenna Installation

Connect each Antenna to a RP-SMA connector by rotating it
clockwise.

Powering the UniFi AP

The UniFi AP can be powered by the included PoE Adapter or a
compatible PoE switch.

1. Lift the lock ing tab of the Port Cover and slide the cover
down to remove it.

2. Connect an Ethernet cable to the Main por t.

Connecting to the PoE Adapter

1. Connect the other end of the Ethernet cable to the
Ethernet port labeled POE on the PoE Adapter.

2. Connect an Ethernet cable from your LAN to the Ethernet
port labeled LAN on the PoE Adapter.

3. Connect the power cord the PoE Adapter and to a power
outlet.

Connecting to a PoE Switch

Connect the other end of the Ethernet cable coming from the
UniFi AP directly to a PoE port on one of the following:

• 48V, 802.3af compliant switch

• Ubiquiti Networks TOUGHSwitch PRO, model TS-8-PRO

TOUGHSwitch PRO Power Connection Diagram

Software Installation

Insert the UniFi Controller software CD into your CD-ROM drive
and follow the on-screen instructions.

After you have installed the software and run the UniFi
Installation Wizard, a login screen will appear for the UniFi
Controller management interface. Enter the Admin Name and
Password that you created and click Login.

You can manage your wireless network and view network
statistics using the UniFi Controller management interface.
For step-by-step instructions or more information, refer to the
User Guide located on the CD or our website:

documentation.ubnt.com/unifi

Specifications

Dimensions 205 x 83 x 37 mm

Weight 250 g

Networking Interface (2) 10/100 Ethernet Ports

Buttons Reset

Antennas (2) 5 dBi Antennas

Wi-Fi Standards 802.11 b/g/n (2.4 GHz)

Power Method PoE 802.3.af

Power Supply 48V, 0.5A PoE Adapter (Included)

Power Save Supported

Max. Power Consumption 8 W

Max. TX Power 28 dBm

Wireless Security WEP, WPA-PSK, WPA-TKIP,

 CE, FCC, IC

Mounting Wall/Pole (Kits Included)

ESD/EMP Protection Air 24KV, Contact 24KV

Operating Temperature -30 to 65° C

Operating Humidity 5 - 95% Condensing

UAP-HD

WPA2 AES, 802.11i

Safety Notices

1. Read, follow, and keep these instructions.

2. Heed all warnings.

3. Only use attachments/accessories specified by the manufacturer.

WARNING: Do not use this product in location that can

be submerged by water.

WARNING: Avoid using this product during an electrical

storm. There may be a remote risk of electric shock from
lightning.

Electrical Safety Information

1. Compliance is required with respect to voltage, frequency, and current
requirements indicated on the manufacturer’s label. Connection to a
different power source than those specified may result in improper
operation, damage to the equipment or pose a fire hazard if the
limitations are not followed.

2. There are no operator serviceable parts inside this equipment. Service
should be provided only by a qualified service technician.

3. This equipment is provided with a detachable power cord which has
an integral safety ground wire intended for connection to a grounded
safety outlet.

a. Do not substitute the power cord with one that is not the provided

approved type. Never use an adapter plug to connect to a 2-wire
outlet as this will defeat the continuity of the grounding wire.

b. The equipment requires the use of the ground wire as a part of the

safety certification, modification or misuse can provide a shock
hazard that can result in serious injury or death.

c. Contact a qualified electrician or the manufacturer if there

are questions about the installation prior to connecting the
equipment.

d. Protective earthing is provided by Listed AC adapter. Building

installation shall provide appropriate short-circuit backup
protection.

e. Protective bonding must be installed in accordance with local

national wiring rules and regulations.

Limited Warranty

UBIQUITI NETWORKS, Inc (“UBIQUITI NETWORKS”) warrants that the
product(s) furnished hereunder (the “Product(s)”) shall be free from defects
in material and workmanship for a period of one (1) year from the date
of shipment by UBIQUITI NETWORKS under normal use and operation.
UBIQUITI NETWORKS’ sole and exclusive obligation and liability under
the foregoing warranty shall be for UBIQUITI NETWORKS, at its discretion,
to repair or replace any Product that fails to conform to the above
warranty during the above warranty period. The expense of removal and
reinstallation of any Product is not included in this warranty. The warranty
period of any repaired or replaced Product shall not extend beyond its
original term.

Warranty Conditions

The above warranty does not apply if the Product:
(I) has been modified and/or altered, or an addition made thereto,

except by Ubiquiti Networks, or Ubiquiti Networks’ authorized

representatives, or as approved by Ubiquiti Networks in writing;
(II) has been painted, rebranded or physically modified in any way;
(III) has been damaged due to errors or defects in cabling;
(IV) has been subjected to misuse, abuse, negligence, abnormal

physical, electromagnetic or electrical stress, including lightning

strikes, or accident;
(V) has been damaged or impaired as a result of using third part y

firmware;
(VI) has no original Ubiquiti MAC label, or is missing any other original

Ubiquiti label(s); or
(VII) has not been received by Ubiquiti within 30 days of issuance of

the RMA.
In addition, the above warranty shall apply only if: the product has been

properly installed and used at all times in accordance, and in all material
respects, with the applicable Product documentation; all Ethernet cabling
runs use CAT5 (or above), and for outdoor installations, shielded Ethernet
cabling is used, and for indoor installations, indoor cabling requirements
are followed.

Returns

No Products will be accepted for replacement or repair without obtaining
a Return Materials Authorization (RMA) number from UBIQUITI NETWORKS
during the warranty period, and the Products being received at UBIQUITI
NETWORKS’ facility freight prepaid in accordance with the RMA process of
UBIQUITI NETWORKS. Products returned without an RMA number will not
be processed and will be returned freight collect or subject to disposal.
Information on the RMA process and obtaining an RMA number can be
found at: www.ubnt.com/support/warranty.

Disclaimer

EXCEPT FOR ANY EXPRESS WARRANTIES PROVIDED HEREIN, UBIQUITI
NETWORKS, ITS AFFILIATES, AND ITS AND THEIR THIRD PARTY DATA,
SERVICE, SOFTWARE AND HARDWARE PROVIDERS HEREBY DISCLAIM
AND MAKE NO OTHER REPRESENTATION OR WARRANTY OF ANY KIND,
EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED TO,
REPRESENTATIONS, GUARANTEES, OR WARRANTIES OF MERCHANTABILITY,
ACCURACY, QUALITY OF SERVICE OR RESULTS, AVAILABILITY,
SATISFACTORY QUALITY, LACK OF VIRUSES, QUIET ENJOYMENT, FITNESS
FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT AND ANY
WARRANTIES ARISING FROM ANY COURSE OF DEALING, USAGE OR
TRADE PRACTICE IN CONNECTION WITH SUCH PRODUCTS AND SERVICES.
BUYER ACKNOWLEDGES THAT NEITHER UBIQUITI NETWORKS NOR
ITS THIRD PARTY PROVIDERS CONTROL BUYER’S EQUIPMENT OR THE
TRANSFER OF DATA OVER COMMUNICATIONS FACILITIES, INCLUDING
THE INTERNET, AND THAT THE PRODUCTS AND SERVICES MAY BE
SUBJECT TO LIMITATIONS, INTERRUPTIONS, DELAYS, CANCELLATIONS
AND OTHER PROBLEMS INHERENT IN THE USE OF COMMUNICATIONS
FACILITIES. UBIQUITI NETWORKS, ITS AFFILIATES AND ITS AND THEIR THIRD
PARTY PROVIDERS ARE NOT RESPONSIBLE FOR ANY INTERRUPTIONS,
DELAYS, CANCELLATIONS, DELIVERY FAILURES, DATA LOSS, CONTENT
CORRUPTION, PACKET LOSS, OR OTHER DAMAGE RESULTING FROM ANY
OF THE FOREGOING. In addition, UBIQUITI NETWORKS does not warrant
that the operation of the Products will be error-free or that operation will
be uninterrupted. In no event shall UBIQUITI NETWORKS be responsible
for damages or claims of any nature or description relating to system
performance, including coverage, buyer’s selection of products (including
the Products) for buyer’s application and/or failure of products (including
the Products) to meet government or regulatory requirements.

Limitation of Liability

EXCEPT TO THE EXTENT PROHIBITED BY LOCAL LAW, IN NO EVENT WILL
UBIQUITI OR ITS SUBSIDIARIES, AFFILIATES OR SUPPLIERS BE LIABLE FOR
DIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL OR OTHER DAMAGES
(INCLUDING LOST PROFIT, LOST DATA, OR DOWNTIME COSTS), ARISING
OUT OF THE USE, INABILITY TO USE, OR THE RESULTS OF USE OF THE
PRODUCT, WHETHER BASED IN WARRANTY, CONTRACT, TORT OR OTHER
LEGAL THEORY, AND WHETHER OR NOT ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.

Note

Some countries, states and provinces do not allow exclusions of implied
warranties or conditions, so the above exclusion may not apply to you.
You may have other rights that vary from country to country, state to
state, or province to province. Some countries, states and provinces do not
allow the exclusion or limitation of liability for incidental or consequential
damages, so the above limitation may not apply to you. EXCEPT TO
THE EXTENT ALLOWED BY LOCAL LAW, THESE WARRANTY TERMS DO
NOT EXCLUDE, RESTRICT OR MODIFY, AND ARE IN ADDITION TO, THE
MANDATORY STATUTORY RIGHTS APPLICABLE TO THE LICENSE OF ANY
SOFTWARE (EMBEDDED IN THE PRODUCT) TO YOU. The United Nations
Convention on Contracts for the International Sale of Goods shall not apply
to any transactions regarding the sale of the Products.

Compliance

FCC

Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including
interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio
communications. Operations of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to
correct the interference at his own expense.

For MPE and antenna usage details, please visit our website at

www.ubnt.com/products

Industry Canada

This Class A digital apparatus complies with Canadian ICES-003.
To reduce potential radio interference to other users, the antenna

type and its gain should be so chosen that the equivalent isotropically
radiated power (e.i.r.p.) is not more than that permitted for successful
communication.

This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:

1. This device may not cause interference, and

2. This device must accept any interference, including interference that
may cause undesired operation of the device.

Cet appareil numérique de la classe A est conforme à la norme NMB-003
Canada.

Pour réduire le risque d’interférence aux autres utilisateurs, le type
d’antenne et son gain doivent être choisies de façon que la puissance
isotrope rayonnée équivalente (PIRE) ne dépasse pas ce qui est nécessaire
pour une communication réussie.

Cet appareil est conforme à la norme RSS Industrie Canada exempts de
licence norme(s). Son fonctionnement est soumis aux deux conditions
suivantes:

1. Cet appareil ne peut pas provoquer d’interférences et

2. Cet appareil doit accepter toute interférence, y compris les
interférences qui peuvent causer un mauvais fonctionnement du
dispositif.

RF Exposure Warning

The antennas used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons and must not be
located or operating in conjunction with any other antenna or transmitter.

Les antennes utilisées pour ce transmetteur doivent être installé en
considérant une distance de séparation de toute personnes d’au moins
20 cm et ne doivent pas être localisé ou utilisé en conflit avec tout autre
antenne ou transmetteur.

CE Marking

CE marking on this product represents the product is in compliance with all
directives that are applicable to it.

RoHS/WEEE Compliance Statement

English

European Directive 2002/96/EC requires that the equipment bearing
this symbol on the product and/or its packaging must not be disposed
of with unsorted municipal waste. The symbol indicates that this
product should be disposed of separately from regular household waste
streams. It is your responsibility to dispose of this and other electric and
electronic equipment via designated collection facilities appointed by the
government or local authorities. Correct disposal and recycling will help
prevent potential negative consequences to the environment and human
health. For more detailed information about the disposal of your old
equipment, please contact your local authorities, waste disposal service, or
the shop where you purchased the product.

Deutsch

Die Europäische Richtlinie 2002/96/EC verlangt, dass technische
Ausrüstung, die direkt am Gerät und/oder an der Verpackung mit diesem
Symbol versehen ist, nicht zusammen mit unsortiertem Gemeindeabfall
entsorgt werden darf. Das Symbol weist darauf hin, dass das Produkt
von regulärem Haushaltmüll getrennt entsorgt werden sollte. Es
liegt in Ihrer Verantwortung, dieses Gerät und andere elektrische
und elektronische Geräte über die dafür zuständigen und von der
Regierung oder örtlichen Behörden dazu bestimmten Sammelstellen zu
entsorgen. Ordnungsgemäßes Entsorgen und Recyceln trägt dazu bei,
potentielle negative Folgen für Umwelt und die menschliche Gesundheit
zu vermeiden. Wenn Sie weitere Informationen zur Entsorgung Ihrer
Altgeräte benötigen, wenden Sie sich bitte an die örtlichen Behörden oder
städtischen Entsorgungsdienste oder an den Händler, bei dem Sie das
Produkt erworben haben.

Español

La Directiva 2002/96/CE de la UE exige que los equipos que lleven este
símbolo en el propio aparato y/o en su embalaje no deben eliminarse
junto con otros residuos urbanos no seleccionados. El símbolo indica
que el producto en cuestión debe separarse de los residuos domésticos
convencionales con vistas a su eliminación. Es responsabilidad suya
desechar este y cualesquiera otros aparatos eléctricos y electrónicos a
través de los puntos de recogida que ponen a su disposición el gobierno y
las autoridades locales. Al desechar y reciclar correctamente estos aparatos
estará contribuyendo a evitar posibles consecuencias negativas para el
medio ambiente y la salud de las personas. Si desea obtener información
más detallada sobre la eliminación segura de su aparato usado, consulte a
las autoridades locales, al servicio de recogida y eliminación de residuos de
su zona o pregunte en la tienda donde adquirió el producto.

Français

La directive européenne 2002/96/CE exige que l’équipement sur lequel
est apposé ce symbole sur le produit et/ou son emballage ne soit pas jeté
avec les autres ordures ménagères. Ce symbole indique que le produit
doit être éliminé dans un circuit distinct de celui pour les déchets des
ménages. Il est de votre responsabilité de jeter ce matériel ainsi que tout
autre matériel électrique ou électronique par les moyens de collecte
indiqués par le gouvernement et les pouvoirs publics des collectivités
territoriales. L’élimination et le recyclage en bonne et due forme ont pour
but de lutter contre l’impact néfaste potentiel de ce type de produits
sur l’environnement et la santé publique. Pour plus d’informations sur le
mode d’élimination de votre ancien équipement, veuillez prendre contact
avec les pouvoirs publics locaux, le service de traitement des déchets, ou
l’endroit où vous avez acheté le produit.

Italiano

La direttiva europea 2002/96/EC richiede che le apparecchiature
contrassegnate con questo simbolo sul prodotto e/o sull’imballaggio non
siano smaltite insieme ai rifiuti urbani non differenziati. Il simbolo indica
che questo prodotto non deve essere smaltito insieme ai normali rifiuti
domestici. È responsabilità del proprietario smaltire sia questi prodotti sia
le altre apparecchiature elettriche ed elettroniche mediante le specifiche
strutture di raccolta indicate dal governo o dagli enti pubblici locali. Il
corretto smaltimento ed il riciclaggio aiuteranno a prevenire conseguenze
potenzialmente negative per l’ambiente e per la salute dell’essere umano.
Per ricevere informazioni più dettagliate circa lo smaltimento delle vecchie
apparecchiature in Vostro possesso, Vi invitiamo a contattare gli enti
pubblici di competenza, il servizio di smaltimento rifiuti o il negozio nel
quale avete acquistato il prodotto.

Declaration of Conformity

UBIQUITI NETWORKS tímto prohla uje, e tento UBIQUITI NETWORKS

Česky

device, je ve shod se základními po adavky a dal ími p íslu n mi

[Czech]

ustanoveními sm rnice 1999/5/ES.

Undertegnede UBIQUITI NETWORKS erklærer herved, at følgende

Dansk

udstyr UBIQUITI NETWORKS device, overholder de væsentlige krav

[Danish]

og øvrige relevante krav i direktiv 1999/5/EF.

Hierbij verklaart UBIQUITI NETWORKS dat het toestel UBIQUITI

Nederlands

NETWORKS device, in overeenstemming is met de essentiële eisen

[Dutch]

en de andere relevante bepalingen van richtlijn 1999/5/EG.
Bij deze verklaart UBIQUITI NETWORKS dat deze UBIQUITI

NETWORKS device, voldoet aan de essentiële eisen en aan de
overige relevante bepalingen van Richtlijn 1999/5/EC.

Hereby, UBIQUITI NETWORKS, declares that this UBIQUITI

English

NETWORKS device, is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.

Käesolevaga kinnitab UBIQUITI NETWORKS seadme UBIQUITI

Eesti

NETWORKS device, vastavust direktiivi 1999/5/EÜ põhinõuetele ja

[Estonian]

nimetatud direktiivist tulenevatele teistele asjakohastele sätetele.

UBIQUITI NETWORKS vakuuttaa täten että UBIQUITI NETWORKS

Suomi

device, tyyppinen laite on direktiivin 1999/5/EY oleellisten

[Finnish]

vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen.

Par la présente UBIQUITI NETWORKS déclare que l’appareil

Français

UBIQUITI NETWORKS, device est conforme aux exigences

[French]

essentielles et aux autres dispositions pertinentes de la directive
1999/5/CE.

Hiermit erklärt UBIQUITI NETWORKS, dass sich diese UBIQUITI

Deutsch

NETWORKS device, in Übereinstimmung mit den grundlegenden

[German]

Anforderungen und den anderen relevanten Vorschriften der
Richtlinie 1999/5/EG befindet”. (BMWi)

ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ UBIQUITI NETWORKS ΔΗΛΩΝΕΙ ΟΤΙ UBIQUITI

Ελληνική

NETWORKS device, ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ

[Greek]

ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ
1995/5/ΕΚ.

Alulírott, UBIQUITI NETWORKS nyilatkozom, hogy a

Magyar

UBIQUITI NETWORKS device, megfelel a vonatkozó alapvetõ

[Hungarian]

követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak.

Hér me l sir UBIQUITI NETWORKS yfir ví a UBIQUITI NETWORKS

Íslenska

device, er í samræmi vi grunnkröfur og a rar kröfur, sem ger ar eru í

[Icelandic]

tilskipun 1999/5/EC.

Con la presente UBIQUITI NETWORKS dichiara che questo UBIQUITI

Italiano

NETWORKS device, è conforme ai requisiti essenziali ed alle altre

[Italian]

disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.

Ar o UBIQUITI NETWORKS deklar , ka UBIQUITI NETWORKS device,

Latviski

atbilst Direkt vas 1999/5/EK b tiskaj m pras b m un citiem ar to saist

[Latvian]

tajiem noteikumiem.

UBIQUITI NETWORKS deklaruoja, kad šis UBIQUITI NETWORKS

Lietuviškai

įrenginys atitinka esminius reikalavimus ir kitas 1999/5/EB

[Lithuanian]

Direktyvos nuostatas.

Hawnhekk, UBIQUITI NETWORKS, jiddikjara li dan UBIQUITI

Malti

NETWORKS device, jikkonforma mal- ti ijiet essenzjali u ma

[Maltese]

provvedimenti o rajn relevanti li hemm fid-Dirrettiva 1999/5/EC.

UBIQUITI NETWORKS erklærer herved at utstyret UBIQUITI

Norsk

NETWORKS device, er i samsvar med de grunnleggende krav og

[Norwegian]

øvrige relevante krav i direktiv 1999/5/EF.

UBIQUITI NETWORKS t mto vyhlasuje, e UBIQUITI NETWORKS

Slovensky

device, sp a základné po iadavky a v etky príslu né ustanovenia

[Slovak]

Smernice 1999/5/ES.

Härmed intygar UBIQUITI NETWORKS att denna UBIQUITI

Svenska

NETWORKS device, står I överensstämmelse med de väsentliga

[Swedish]

egenskapskrav och övriga relevanta bestämmelser som framgår av
direktiv 1999/5/EG.

Por medio de la presente UBIQUITI NETWORKS declara que el

Español

UBIQUITI NETWORKS device, cumple con los requisitos esenciales

[Spanish]

y cualesquiera otras disposiciones aplicables o exigibles de la
Directiva 1999/5/CE.

Niniejszym, firma UBIQUITI NETWORKS o wiadcza, e produkt serii

Polski

UBIQUITI NETWORKS device, spełnia zasadnicze wymagania i inne

[Polish]

istotne postanowienia Dyrektywy 1999/5/EC.

UBIQUITI NETWORKS declara que este UBIQUITI NETWORKS device,

Português

está conforme com os requisitos essenciais e outras disposições da

[Portuguese]

Directiva 1999/5/CE.

Prin prezenta, UBIQUITI NETWORKS declară că acest dispozitiv

Română

UBIQUITI NETWORKS este în conformitate cu cerințele esențiale și

[Romanian]

alte prevederi relevante ale Directivei 1999/5/CE.

Online Resources

Support support.ubnt.com
Community community.ubnt.com
Downloads downloads.ubnt.com

© 2013 Ubiquiti Networks, Inc. All rights reserved. P050313—720-00028-01