TrekStor i.Beat joy User Manual

TrekStor

Contents

1 Introduction 2

1.1 Box contents . . . . . . . . . . . . . . . . . . . . . . . . 2

1.2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . 3

1.3 TrekStor i.Beat joy 2.0 controls . . . . . . . . . . . . . . 4

2 Functions of the TrekStor i.Beat joy 2.0 5

2.1 Note . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

2.2 Basic functions . . . . . . . . . . . . . . . . . . . . . . 5

2.2.1 Switching on and off your TrekStor i.Beat joy 2.0 5

2.2.2 Locking the keys . . . . . . . . . . . . . . . . . . 6

2.2.3 Play/Pause . . . . . . . . . . . . . . . . . . . . 6

2.2.4 Fast forwarding/rewinding/changing tracks . . . 6

2.2.5 Adjusting the volume . . . . . . . . . . . . . . . 7

2.2.6 Folder navigation . . . . . . . . . . . . . . . . . 7

Deleting files . . . . . . . . . . . . . . . . . . . . 8

2.2.7 Repeat A-B . . . . . . . . . . . . . . . . . . . . 8

2.3 Main menu . . . . . . . . . . . . . . . . . . . . . . . . . 8

I

Contents

2.3.1 Music Player . . . . . . . . . . . . . . . . . . . . 9

2.3.2 M3U-Playlist . . . . . . . . . . . . . . . . . . . . 9

2.3.3 Recorder . . . . . . . . . . . . . . . . . . . . . . 10

Recording using the built-in microphone . . . . . 10

Recording using the line-in jack . . . . . . . . . . 11

2.3.4 Music Player setup . . . . . . . . . . . . . . . . 11

Equalizer Setup . . . . . . . . . . . . . . . . . . 11

Play mode . . . . . . . . . . . . . . . . . . . . . 12

2.3.5 Record Setup . . . . . . . . . . . . . . . . . . . 12

Source . . . . . . . . . . . . . . . . . . . . . . . 12

Setting up microphone recording . . . . . . . . . 13

Setting up line-in recording . . . . . . . . . . . . 13

2.3.6 Setting Menu . . . . . . . . . . . . . . . . . . . 13

3 Connecting to your PC 15

3.1 Minimum requirements . . . . . . . . . . . . . . . . . . 15

3.2 Windows 98(SE) installation guide . . . . . . . . . . . . 15

3.3 Windows ME/2000/XP installation guide . . . . . . . . 16

3.4 Exchanging data . . . . . . . . . . . . . . . . . . . . . . 17

3.5 Creating MP3 files . . . . . . . . . . . . . . . . . . . . . 17

3.6 Logging off from your computer . . . . . . . . . . . . . 19

4 Additional Information 20

4.1 Updating the firmware for your TrekStor i.Beat joy 2.0 . 20

II TrekStor

Contents

4.2 FAQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

A Instructions and Warranty 23

A.1 Support and contact . . . . . . . . . . . . . . . . . . . . 23

A.2 Liability . . . . . . . . . . . . . . . . . . . . . . . . . . 23

A.3 Safety information . . . . . . . . . . . . . . . . . . . . . 24

A.4 Instructions for use . . . . . . . . . . . . . . . . . . . . 24

A.5 Trademarks . . . . . . . . . . . . . . . . . . . . . . . . 25

A.6 Battery disposal . . . . . . . . . . . . . . . . . . . . . . 25

A.7 Copyright . . . . . . . . . . . . . . . . . . . . . . . . . 26

A.8 Warranty terms and conditions . . . . . . . . . . . . . . 26

TrekStor i.Beat joy 2.0 1

1 Introduction

Congratulations on your purchase of the TrekStor i.Beat joy 2.0 . We are
sure you will enjoy countless hours of listening pleasure. The TrekStor
i.Beat joy 2.0 is a high-quality MP3 player with numerous functions for
enjoying music at home or on the go. Please read the instructions in this
manual before using the player.

1.1 Box contents

The follow components are included in the box:

1. TrekStor i.Beat joy 2.0

2. Earphones

3. AAA battery

4. Driver CD with user’s manual

5. USB cable

2

1.2 Features

1.2 Features



Large LCD



M3U playlist function



Line-in recording



Dictation function



Folder navigation



And much more

TrekStor i.Beat joy 2.0 3

1 Introduction

1.3 TrekStor i.Beat joy 2.0 controls

A USB connector H Volume ’V-’ button
B ’Hold’ button (key lock) I ’|
C ’M’ button (menu) (Left)
D ’A-B’ button / Recorder J LCD

E Volume ’V+’ button K Headphone jack
F ’

II

|’ Fast forward button (Right) L Microphone

G ’

Iq’ button (Play/Pause/OK/On/Off) M Battery cover

Note: The headphone jack also serves as a line-in jack for recording from
external devices such as CD players, stereos, etc.

4 TrekStor

JJ

’ Rewind button

2 Functions of the TrekStor i.Beat joy 2.0

2.1 Note

The TrekStor i.Beat joy 2.0 has only a few buttons to make operation as
easy as possible. There are more functions than buttons, however. How
long you hold down a button determines which function you want to be
carried out.

2.2 Basic functions

2.2.1 Switching on and off your TrekStor i.Beat joy 2.0

To switch on your TrekStor i.Beat joy 2.0 , hold down the ’
three seconds.

Note: Make sure the key lock ( ’Hold’ button) is switched
off. If the key lock has been switched off, a corresponding

Iq’ button for

5

2 Functions of the TrekStor i.Beat joy 2.0

message appears, and the TrekStor i.Beat joy 2.0 switches
off.

To switch off your TrekStor i.Beat joy 2.0 , hold down the ’

Iq’ button for

at least two seconds. The TrekStor i.Beat joy 2.0 switches off automati­cally.

2.2.2 Locking the keys

To enable the key lock, push the ’Hold’ button to the right. The key lock
icon appears in the upper right of the display next to the battery icon.

2.2.3 Play/Pause

When you switch on your TrekStor i.Beat joy 2.0 , it is in ’Music’ play
mode. To play a track, press the ’
the track is playing to pause the track. Press ’

Iq’ button. Press the ’Iq

Iq’ to continue resume.

’ button while

2.2.4 Fast forwarding/rewinding/changing tracks

Press and hold ’|
the ’

II

|’ button to fast forward and the ’|JJ’ button to rewind in the

JJ

’ or ’II|’ to fast forward or rewind within a track. Use

track.

6 TrekStor

2.2 Basic functions

Press and release’|
next track. Press ’|

JJ

’ or ’II|’ to switch tracks. Press ’II|’ to play the

JJ

’ to go to the beginning of the current track.

2.2.5 Adjusting the volume

Use the ’V-’ and ’V+’ buttons to adjust the volume. Press ’V+’ to
increase the volume. Press ’V-’ to decrease the volume.

Press and release the buttons to adjust the volume gradually. Hold down
the buttons to adjust the volume continuously.

2.2.6 Folder navigation

The TrekStor i.Beat joy 2.0 makes managing music files easy. You can
store your data in different folders. You can use the folder navigation
function to select specific subdirectories and files.

To go to the folder navigation function, press the ’M’ button. Press ’|
to move up one folder level and ’

II

|’ to move down one folder level. Use

JJ

the ’V+’ and ’V-’ buttons to select the required folder or file and press

’Iq

’ to confirm your selection.

TrekStor i.Beat joy 2.0 7

’

2 Functions of the TrekStor i.Beat joy 2.0

Deleting files

In the folder navigation function, use the ’V+’ and ’V-’ buttons to select
the file you want to delete. Press ’A-B’. You will be asked whether you
are sure you want to delete the file. Select ’Yes’ to delete the file.

2.2.7 Repeat A-B

Your TrekStor i.Beat joy 2.0 allows you to continuously repeat an excerpt
of a track. To do so, while the track is playing, press ’A-B’ to set the
beginning of the segment you want to repeat point. Press ’A-B’ again
to set the end of the segment. ’A-B’ appears in the display, and the
segment is repeated continuously.

To stop playing the segment, press ’A-B’.

2.3 Main menu

Your TrekStor i.Beat joy 2.0 has three different modes: ’Music’ , ’Play­list’ and ’Record’ . You can change between modes using the main

menu. To go to the main menu, hold down the ’M’ button for two
seconds. You can then change between modes or set up Music Player
and Record modes.

8 TrekStor

2.3 Main menu

Use the ’|
the ’

JJ

’ and ’II|’ buttons to select Music Player mode and press

Iq’ button to confirm your selection. To return to the previous menu

level, press ’M’ or wait 5 seconds. If you wait 5 seconds without press­ing a button, your TrekStor i.Beat joy 2.0 automatically quits the menu
configuration and returns to the previous mo de.

2.3.1 Music Player

Go to the main menu. Use the ’|
sic’ and press ’

Iq’ to confirm your selection. This mode is also called

JJ

’ and ’II|’ buttons to select ’Mu-

MP3/WMA play mode.

In this mode, music files are played in the order they are stored on your
TrekStor i.Beat joy 2.0 .

2.3.2 M3U-Playlist

Go to the main menu. Use the ’|
and press ’

Iq’ to confirm your selection.

JJ

’ and ’II|’ buttons to select ’Playlist’

This mode is also referred to as M3U mode or Playlist mode since it uses
Winamp1playlists in M3U format. Create a Winamp playlist of MP3 files
on your TrekStor i.Beat joy 2.0 to define the order in which tracks are

1

a p opular MP3 player that can be downloaded free of charge from http://www.winamp.com/

TrekStor i.Beat joy 2.0 9

2 Functions of the TrekStor i.Beat joy 2.0

played. Save the playlist directly to your TrekStor i.Beat joy 2.0 . The
available playlists are then displayed in M3U mode. Select a playlist to
play the tracks in the defined order.

Note: You can only edit M3U playlists on your computer
(using Winamp or a text editor such as Notepad, for exam­ple).

2.3.3 Recorder

Go to the main menu. Use the ’|
and press ’

Iq’ to confirm your selection.

JJ

’ and ’II|’ buttons to select ’Record’

Note: Before you can record, you must define the sources
you want your TrekStor i.Beat joy 2.0 to record. The built­in microphone and line-in jack are available sources. For
information on setting up the source, see 2.3.5.

Recording using the built-in microphone

Press ’A-B’ ’Recording’ appears on the display. Recording begins, and
the display indicates the length of the previous recording.

To stop recording, press ’

Iq’ . The recorded file is saved to the VOICE di-

rectory. Press ’M’ to navigate through your saved recordings (see 2.2.6).

10 TrekStor

2.3 Main menu

Recording using the line-in jack

Connect an external source such as a CD player to the headphone jack.
Press the ’A-B’ button on your TrekStor i.Beat joy 2.0 as you start the
external source. ’Recording’ appears on the display. Recording begins,
and the display indicates the length of the previous recording.

To stop recording , press ’

Iq’ . The recorded file is saved to the LINE direc-

tory. Press ’M’ to navigate through your saved recordings (see 2.2.6).

2.3.4 Music Player setup

Go to the main menu. Use the ’|
Setting’ and press ’

Iq’ to confirm your selection.

JJ

’ and ’II|’ buttons to select ’Play

You can then configure the settings for the equalizer, repeat and play
settings and the play speed.

Equalizer Setup

Select ’Equalizer’ and press ’
different equalizer mo des. Press ’

TrekStor i.Beat joy 2.0 11

Iq’ to confirm your selection. There are 5

Iq’ to activate one of them.

2 Functions of the TrekStor i.Beat joy 2.0

Play mode

Select ’Repeat’ and press ’



’Normal’ : Plays all tracks in order.



’Repeat All’ : Repeats all tracks in order.



’Folder’ : Repeats all tracks in the current folder.



’Repeat One’ : Repeats the current track.



’Shuffle’ : Plays all tracks in random order.



’Preview’ : Plays the first 5 seconds of all titles in succession.

Iq’ to confirm your selection.

2.3.5 Record Setup

Go to the main menu. Use the ’|
Setting’ and press ’

Iq’ to confirm your selection.

JJ

’ and ’II|’ buttons to select ’Record

You can then set up recording sources, formats and sensitivity (wave­length).

Source

Select ’Source’ and press ’
different recording sources. Press ’

Iq’ to confirm your selection. There are 2

Iq’ to activate one of them.

12 TrekStor

Setting up microphone recording

2.3 Main menu

Select ’Voice Record’ and press ’

’Iq

’ to select ’WAV’ format.

Iq’ to confirm your selection. Press

Setting up line-in recording

Select ’Line Record’ and press ’

Iq’ to confirm your selection. Then

select:



The required ’WAV File’ and press ’



The required ’Sensitivity’ . The sensitivity indicates the mini-

Iq’ to activate the format.

mum wavelength recorded. You can adjust the wavelength to pre­vent hissing in the recording.

2.3.6 Setting Menu

Go to the main menu. Use the ’|
and press ’

Iq’ to confirm your selection. In the following submenu, you

JJ

’ and ’II|’ buttons to select ’Tools’

can adjust many of the TrekStor i.Beat joy 2.0 settings to your needs:



’Timer’

TrekStor i.Beat joy 2.0 13

2 Functions of the TrekStor i.Beat joy 2.0

– ’Play Time’ : Your TrekStor i.Beat joy 2.0 switches off auto-

matically after a selected time even if you ware still listening
to music. ’Off’ switches off the automatic off feature.

– ’Shutdown’ : When not in use, your TrekStor i.Beat joy 2.0

switches off automatically after selected period. ’Off’ switches
off the automatic off feature when the player is not in use.



’Screen’

– ’Backlight’ : You can define how long you want the TrekStor

i.Beat joy 2.0 backlight to remain on after the last button is
pressed.

– ’Contrast’ : Change the display contrast.



’Format’ : Formatting permanently deletes ALL files on your Trek­Stor i.Beat joy 2.0 !



’System Info’ : View the used and available memory in your Trek­Stor i.Beat joy 2.0 and the firmware version.



’Language’ : Use the ’|

JJ

’ and ’II|’ buttons to select from the

available languages.

14 TrekStor

3 Connecting to your PC

3.1 Minimum requirements



MicrosoftrWindowsTM98/ME/2000/XP



CD-ROM drive



Pentium 200MHz



RAM 32MB (Windows ME, 2000) - 64MB (Windows XP)



USB port

3.2 Windows 98(SE) installation guide

Note: If you are using Windows 98, you must install the

driver before connecting your TrekStor i.Beat joy 2.0 to your
PC. You may need to restart your PC.

15

3 Connecting to your PC

You must install a separate driver since Microsoft Windows 98(SE) does
not offer native support for a USB connector. To install the driver, follow
these steps:



Insert the driver CD in the CD-ROM drive of your computer. The
TrekStor appears.



Click ’Windows 98 Driver’ .



Follow the installation instructions that appear.



Restart your computer.

3.3 Windows ME/2000/XP installation guide

A driver is not required to log your TrekStor i.Beat joy 2.0 onto Win­dows ME/2000/XP systems. However, you must install the current Ser­vice Pack version (currently SP4 for Windows 2000, and SP2 for Win­dows XP) to connect your TrekStor i.Beat joy 2.0 . Should you en­counter problems, download the current Microsoft Service Pack for your
respective operating system. Service Packs can be downloaded from
http://www.windowsupdate.com.

16 TrekStor

3.4 Exchanging data

3.4 Exchanging data

Once your TrekStor i.Beat joy 2.0 is connected to your computer, it runs
like a normal hard disk. The device is automatically assigned its own
drive letter. You can drag and drop to copy, move and delete any type
of data on your device in Windows Explorer. Note: Your TrekStor i.Beat
joy 2.0 only supports the FAT file system, not FAT32 or NTFS.

Caution: Do not remove the device while data is being
transmitted. Data may otherwise be lost.

3.5 Creating MP3 files

Using the Audiograbber you can record (’rip’) legal MP3 files for personal
use from your own audio CDs if they are not copy protected. Install the
Audiograbber included on the CD on your computer1.

To achieve the best possible recording quality for your MP3 files, we
recommend installing the LAME MP3 encoder before using the Au­diograbber for the first time.2After storing the LAME encoder on

1

For more information and detailed instructions for novices, see the Audiograbber website at

www.audiograbber.com-us.net

2

See verbaudiograbber.com-us.net. Please read the licensing conditions carefully and familiarize

yourself with possible legal issues.

TrekStor i.Beat joy 2.0 17

3 Connecting to your PC

your computer, unpack the file (using WinZip, for example) and copy

"lame_enc.dll" to the Audiograbber folder.

Before you can begin recording your MP3 files, you must define the fol­lowing settings in the ’Options’ menu.



In the ’Setting Menu’ , enter the folder to which you want to save
the MP3 files.



In ’MP3 Options’

– ...choose to ’grab’ the MP3 file using a temporary Wave file.

– ...select the encoder (e.g. LAME MP3 or OGG).

– ...set the bit rate for audio quality

(Recommended:=128 kbits/s).

Insert an audio CD. If Windows automatically runs the CD in a program,
close the program. The Audiograbber loads all songs and displays them
as ’´Tracks’, beginning with ’Track 1’. To load information about your
CD (band, album, title, etc.) from an online database while connected
to the Internet, click the ’penguin’ icon (FreeDB).

Select the desired tracks. Click ’Grab’ to start creating your MP3 files.
Once the MP3 files have been created, you can play the tracks on your
computer (with Windows Media Player, for example). You can also copy
the MP3 files right onto your TrekStor i.Beat joy 2.0 and play them from
there.

18 TrekStor

3.6 Logging off from your computer

3.6 Logging off from your computer

Windows 2000/ME/XP users must click the icon ’Remove or eject
hardware’ on the system tray in the lower right-hand corner. Select the
’USB Mass Storage Device’ and click ’Exit’ .

Windows 98 users must use the ’Device Manager’ to log off the Trek­Stor i.Beat joy 2.0 . In the ’Device Manager’ , open ’Drives’ and
left-click to select the TrekStor i.Beat joy 2.0 . Click ’Remove’ . You can
now disconnect your TrekStor i.Beat joy 2.0 from the USB connector.

TrekStor i.Beat joy 2.0 19

4 Additional Information

4.1 Updating the firmware for your TrekStor i.Beat joy

2.0

See the TrekStor website1) for the current version of firmware for your
TrekStor i.Beat joy 2.0. Download the firmware and save it to your PC.

Unpack ALL files and copy them to the home directory of your TrekStor
i.Beat joy 2.0 . Disconnect your TrekStor i.Beat joy 2.0 from your PC (
section 3.6). WITHOUT turning your TrekStor i.Beat joy 2.0 on, connect
it to your computer and wait until the firmware update has finished.

4.2 FAQ

This section includes frequently asked questions and common problems
and possible solutions.

1

http://www.trekstor.de

20

!

4.2 FAQ

I pressed ’

Iq’ , but nothing appears on the LCD.



There is no battery in the player or the battery is dead. Replace
the battery.



The key lock function is on. Slide back the ’Hold’ hold button to
switch off the key lock function.

My computer does not recognize my TrekStor i.Beat joy 2.0 .



You are using Windows 98 and have not installed the driver. Install
the driver as described in section 3.2.



The firmware has been damaged. To solve this problem, follow
these steps:

– Remove the battery.

– Connect your TrekStor i.Beat joy 2.0 to your computer and

hold down the ’

Iq’ button for approximately 3 seconds.

– Your TrekStor i.Beat joy 2.0 should app ear in ’My Computer’

as a new drive. Update the firmware as described in sec­tion 4.1.

There is less memory available than I though. Several factors can affect
the exact number of bytes available.

TrekStor i.Beat joy 2.0 21

4 Additional Information



Indications in ’MB’ are always approximate since there is general
confusion as to whether 1 MB = 1000 KB or 1 MB = 1024 KB
(and whether 1 KB = 1000 bytes or 1 KB = 1024 bytes). Conse­quently, 128 MB can indicate a value between 128,000,000 bytes
and 134,217,728 bytes. You can view the exact number of bytes
in Windows. For more information on the different view of the term
’MB’, see an online resource such as WikiPedia (http://de.wikipedia.org/wiki/Byte).



Part of the memory has been used for partitioning and formatting.
The file system (e.g. FAT) and partition data can require different
amounts of memory. The same drive formatted by two different
programs can have a different amount of memory.



Another part of the memory is used by the firmware, which can use
multiple MB depending on the functions. The memory available
after you update the firmware may vary.

22 TrekStor

A Instructions and Warranty

A.1 Support and contact

If you have any questions about our products or need assistance, send an e-mail to our free
German-speaking support service at [e-mail].

You can also contact our German-sp eaking support team by telephone1. Our support team is
available Monday through Friday from 10:00-16:00 at the telephone numb er b elow.

Tel: (+49) (0)6251-55040-14
Fax: (+49) (0)6251-55040-20

www.trekstor.de
[e-mail]

A.2 Liability

The manufacturer only guarantees the suitability of the product for its intended use. TrekStor and
its suppliers shall not be liable for loss of data that occurs during use or due to the use of the device
or for consequences thereof. TrekStor shall under no circumstances be liable for direct, incidental
special damages or consequential damages such as damage or loss of property or equipment,
loss of earnings or sales, costs for spare parts, expenses or inconveniences due to interruption of
service, or other damages. The user alone shall be liable for the loss, damage or destruction of
data during operation of a TrekStor product. TrekStor shall under no circumstances be responsible

1

The standard telephone rates for German local, long-distance and international calls apply.

23

A Instructions and Warranty

for recovering lost data. Under no circumstances can claims that exceed the purchase price of
the product be asserted.

TrekStor reserves the right to continuously improve the product. All modifications may be made
without describing them in this manual. The information contained in this manual must therefore
not correspond to the current technical design.

A.3 Safety information



Work on the product can only be performed by persons qualified for that purpose.



Read this manual carefully and follow the instructions when installing the device.



Do not open the product and attempt to modify it. Never insert metal objects into the
product. This could result in an electrical shock, fire, short-circuit or hazardous emissions.
Components cannot be serviced by the user. If the device is not functioning properly,
carefully read the warranty terms in the A.8 section.



Never leave the device out in the rain and keep it away from water and moisture. Never
place containers filled with liquid on the device. Liquid could enter openings in the product
creating a risk of electrical shock, short-circuits, fire and injuries.

A.4 Instructions for use



Never leave the device out in temperatures below 5C (41F) or above 40C (104F),
as damage to the electrical components could result. Keep the device away from heat
sources and direct sunlight (even through a window). Environments that are too cold or
too humid can also damage the device.



Unplug the device when there is a risk of lightning strikes or when the device is not in use
for longer periods of time. Otherwise the risk of electrical sho ck, fire and short-circuits
increases.

24 TrekStor

A.5 Trademarks



Never place the device near other electrical devices or equipment such as televisions,
radios and speakers since this could affect the op eration of the other devices.



Never place the device near sources of magnetic interference such as computer monitors,
televisions and speakers. Magnetic interference can affect operation and stability of the
device. Never place heavy objects on the device or exert extreme force on the device.



Store the device in a clean, dust-free location. Dust can collect inside the device increasing
the risk of damage and malfunction.



Never use solvents, paint thinners, cleaning agents or other chemical products to clean
the surface of the device. Use a soft, dry cloth or soft brush to clean the device.

Attention!: The warranty may become null and void if you do not follow the
above instructions for use.

A.5 Trademarks

Microsoft and Windowsrare registered trademarks of Microsoft Corporation. All other registered
trademarks and the registered trademarks mentioned in this manual are the sole property of their
respective owners and are confirmed as such.

A.6 Battery disposal

Do not dispose of batteries along with normal household waste. As a consumer, you are required
by law to return used batteries. You can return old batteries to public community collection
centers or anywhere where batteries of the same type are sold. Do not throw batteries into an
open fire or dispose of them in a wastebasket/dumpster or recycling container not intended for
batteries or in any other manner that could be harmful to the environment.

TrekStor i.Beat joy 2.0 25

A Instructions and Warranty

A.7 Copyright

This manual may not be reproduced in whole or in part or copied, transferred or translated in any
form or using any means, whether electronic or mechanical, including photo copying and recording,
without the express written permission from TrekStor GmbH & Co. KG.

The software described in this document is subject to a license agreement and can only be used
or copied as indicated in the terms and conditions of the license agreement. Software cannot be
copied to any other medium unless expressly permitted by the license agreement. The holder of
the license is permitted to make a copy of the software for backup purp oses, however.

A.8 Warranty terms and conditions

This product is subject to the legal warranty periods for manufacturing faults and defects.

Warranty contents:

1. If a malfunction due to faulty manufacturing should occur, TrekStor will repair or replace
the faulty product at its discretion.

2. The following repairs are not included in the warranty and must be undertaken at the
user’s exp ense:



Malfunctions occurring after the legal warranty periods have expired



Malfunctions resulting from incorrect operation by the user (if the device is not
operated as describ ed in the manual)



Malfunctions due to other devices



Changes or damage to the device not originating from the manufacturer. The
warranty shall become null and void if the device is opened by retailers or repair
shops not authorized by TrekStor GmbH & Co. KG.



Damage due to natural disasters (force majeure)

26 TrekStor

A.8 Warranty terms and conditions

To assert a claim on the warranty, contact your lo cal shop where you purchased the device. You
must present your sales slip. The retailer will then perform services justified by the warranty after
consultation with the TrekStor service team.

Do not send any products directly to TrekStor. Any such shipments will NOT be processed.

TrekStor i.Beat joy 2.0 27

TrekStor

TrekStor

TrekStor

TrekStor GmbH & Co. KG

TrekStor i.Beat joy 2.0 Manual

ibjoy2-AT-V2.1-EN-050422a