EG-1 Custom V2 User Guide
THANK YOU FOR PURCHASING A TRAVELER GUITAR EG-1 CUSTOM V2!
Traveler Guitar is the industry’s leading manufacturer of full-scale, travel-sized instruments. Most travel guitars
sacrifice playability for portability—but at Traveler Guitar, we believe players need both. Since 1992, we have
designed full-scale acoustic and electric travel guitars, offering a wide variety of solutions for players on the go.!
The EG-1 Custom V2 you hold in your hands is an electric guitar you can take anywhere. Designed with playability
and portability in mind, the EG-1 features a full 24 3/4” scale for a real guitar experience, and its In-body tuning
system allows for a shorter overall length, making it the ultimate travel guitar.
Join the community on our Photo Lounge by sending us images of you with your Traveler Guitar, or follow us on
Facebook for more up-to-date info.
INTRODUCTION
SPECS:
•
•
Clean/Boost/Overdrive/Distortion settings, 1/8″
Scale Length: 24 3/4 in.
Electronics: Custom Headphone Amp, Tone control,
•
•
•
Neck Width at Nut: 1 5/8 in.
Strings: D’Addario EXL110
Overall Length: 28 1/2 in.
Aux-in, built-in Shadow E-tuner
•
•
•
•
Pickup: Full-Size Humbucker
Body: Alder (on Black) Mahogany (on Gold)
Neck: Mahogany
Construction: Bolt-on
•
•
•
•
•
Overall Depth: 2 1/4 in.
Body Thickness: 1 5/8 in.
Body Width: 10 1/2 in.
Gig Bag LxWxH: 31 1/2 x 13 x 4 1/2 (in.)
Weight: 4 lbs. 13 oz.
•
•
•
•
Finish: Black Gloss or Gold Gloss top
Fingerboard: Ebonized Rosewood
Fingerboard Inlays: Block
Frets: 21 Jumbo
•
•
headphone out
•
Weight in Gig Bag: 6 lbs. 10 oz.
Audio Output: Standard 1/4 in. jack, 1/8 in.
Instrument Input: 1/8 in. aux-in
•
gear)
Hardware: Gold or Chrome 14:1 Gear Ratio (closed
•
Batteries: 2 x AAA
OVERVIEW:
The Traveler Guitar EG-1 Custom V2 is a full 24 ¾” scale electric travel guitar featuring a full-sized humbucker
and our newly redesigned on board headphone amplifier.
The In-body tuning system uses conventional tuning machines mounted in the guitar’s body to facilitate the use
of standard guitar strings. Strings pass through the endcap, then around the string rollers and to the tuning
machines mounted to the back of the guitar. The tuning keys are accessible from the front of the guitar to allow
tuning while holding the guitar in the playing position. The guitar also has many standard features such as a
mahogany body and neck, ebonized rosewood fretboard, standard strap pins, an adjustable truss rod and 1/4”
output.
The headphone amp allows standard headphones to be plugged directly into the guitar and offers four selectable
tones; clean, boost, overdrive and distortion. In addition to the headphone amp there is also a 1/8” input to plug
in your mobile device and jam along with your favorite tracks, and hear the mix through your headphones or
through an amplifier.
OVERVIEW
INCLUDED ACCESSORIES:
Your EG-1 Custom V2 guitar comes with a custom fit gig bag. Also included is a truss rod adjustment tool.
not to scale