TP-Link TL-WR340G, TL-WR340GD User Manual

Ethernet Cable

TL-WR340G/TL-WR340GD Power Adapter

The Easy Setup Assistant is not supported in Linux or Mac OS. If you are runing Linux /Mac or without CD-ROM, please refer to Appendix 1.

(Turn over)

WAN4 3 2 1POWER

LINE

LAN

Internet

Cable/DSL Modem

Wireless Router

RJ45

Cable

Cable

Line

1

2

3

Step 1.

Step 2.

Step 3.

RESET

TL-WR340G
54M Wireless Router

PWR SYS WLAN WAN 1 2 3 4

Quick Installation Guide

54Mbps Wireless Router

Package Contents

MODEL NO.

Resource CD

QIG

54Mbps Wireless Router

TL-WR340G/TL-WR340GD

Hardware Connection

1

System Requirement

· Windows 7 · Windows Vista · Windows XP · Windows 2000

MODEL NO. TL-WR340G/TL-WR340GD

2

Connecting by Easy Setup Assistant

Insert the TP-LINK Resource CD into the CD-ROM drive.

1

After conrming the hardware connection and the status

3

of LEDs, click Next to continue.

Select the connection type your ISP provides and click Next.

5

Here we take connection type PPPoE for example.

Connect the WAN port on your Router to the Modem’s LAN port with an Ethernet cable.

Connect your computer to any Port labeled 1~4 on the Router with an Ethernet cable.

Plug the provided Power Adapter into the Power jack on the back of the Router and the other end to a standard
electrical Wall socket, and power on the Modem.

Create a unique or easy-to-remember name for your

7

wireless network. You can also keep the default setting.
Click Next to continue.

7106503567

Here we take TL-WR340G for example. Select TL-WR340G

2

and click Easy Setup Assistant.

After the connectivity has been checked successfully, please

4

click Next to continue.

Enter the User Name and Password provided by your

6

ISP and then click Next.

You are recommended to select Most Security

8

(WPA2-PSK) to secure your wireless network. Enter
a key of 8~63 characters and click Next.

Connecting by Easy Setup Assistant (continued)

WAN4 3 2 1POWER

RESET

RESET

2

Appendix 1: Connecting by WEB Management Interface

9

NEXT to continue.

You can save these settings in a text le on your
desktop. If you forget the Network Security Key, you
can check the Router Settings.txt.

10

click Next.

Click FINISH to close the wizard.

11

You can click WEB management interface for more
advanced settings.

The basic settings for your Router are completed. You

12

can go to http://www.tp-link.com to verify the
Internet connection.

Router.

1) Set the IP address of your wired network adapter as

Automatically.

For Windows 7

Go to ‘Start > Control Panel’. Click ‘View network
status and tasks > Local Area Connection > Proper­ties’ and double-click ‘Internet Protocol Version 4
(TCP/IPv4)’. Select ‘Obtain an IP address automati-
cally’, choose ‘Obtain DNS server address automati-
cally’ and click ‘OK’.

For Windows Vista

Go to ‘Start > Settings > Control Panel’. Click ‘View
network status and tasks > View status > Properties’
and double-click ‘Internet Protocol Version 4 (TCP
/IPv4)’. Select ‘Obtain an IP address automatically’,

choose ‘Obtain DNS server address automatically’
and click ‘OK’.

For Windows XP/2000

Go to ‘Start > Control Panel’. Click ‘Network and
Internet Connections > Network Connections’.

Right-click ‘Local Area Connection’, select ‘Properties’
and then double-click ‘Internet Protocol (TCP/IP)’.
Select ‘Obtain an IP address automatically’, choose
‘Obtain DNS server address automatically’ and
click ‘OK’.

2) Open your browser and type tplinklogin.net in the address
eld. Then use admin for user name and password to login.

3) Go to Quick Setup and click Next. Select your Internet

connection type and click Next.

4) Here we take PPPoE for example. Enter the User Name
and Password provided by your ISP and then click Next.

5) Congure your network name (SSID) and password.

and then click Next to continue.

6) Click Finish or Reboot to make your settings take eect.

Appendix 2: Troubleshooting

How do I restore my Router’s conguration to
its factory default settings?

With the Router powered on, press and hold the
button on the rear panel for 8 to 10 seconds using a pin
before releasing it.

RESET

What can I do if I cannot access the Internet?

1) Check to see if all the connectors are connected well,
including the telephone line (for your modem), Ethernet
cables and power adapter.

2) Check to see if you can access the Router’s web
management page. If you can, please follow the
following steps to solve the problem. If you can’t, please
refer to Appendix 1.

3) Make sure that you are connected to the TP-LINK Router
with the computer that was originally connected to your
modem, then log on to the web-based management

page and browse to ‘Network > MAC Clone‘, click
‘Clone MAC address‘ and then click ‘Save‘. Reboot the

Router and try to access the Internet from your computer,
if the problem persists, please go to the next step.

4) Please feel free to contact our Technical Support if the

problem persists.

What can I do if I forgot my password?

1) Restore the Router’s conguration to its factory default
settings. If you don’t konw how to do that, please refer to

How do I restore my Router’s conguration to its factory
default settings?

2) Use the default user name and password: admin, admin.

3) Try to congure your router once again by following the
instructions in the previous steps of the QIG.

You can refer to our User Guide on the CD to set up more
functions of the Router.

Technical Support

For more troubleshooting help, go to
www.tp-link.com/support/faq.asp

To download the latest Firmware, Driver, Utility and User Guide, go to
www.tp-link.com/support/download.asp

For all other technical support, please contact us by using the
following details:

Global

Tel: [phone]
E-mail : [e-mail]
Service time: 24hrs, 7days a week

Singapore

Tel: [phone]
E-mail: [e-mail]
Service time: 24hrs, 7days a week

UK

Tel: [phone]
E-mail: [e-mail]
Service time: 24hrs, 7days a week

USA/Canada

Toll Free: [phone]

[e-mail]

E-mail:
Service time: 24hrs,7days a week

Germany / Austria

Tel :[phone] (German
Service) / +49 1805 TPLINK
E-mail: [e-mail]
Fee: 0.14 EUR/min from the German

0.42 EUR/min from mobile phone.
Service Time: Monday to Friday
9:00 AM to 6:00 PM. GMT+1 or GMT+2

(Daylight Saving Time in Germany)
* Except bank holidays in Hesse

TP-LINK TECHNOLOGIES CO., LTD.

www.tp-link.com

Australia & New Zealand

Tel: AU 1300 87 5465
NZ 0800 87 5465
E-mail: [e-mail]

Service time: 24hrs, 7 days a week

Malaysia

Tel: [phone] (1300 88TPLINK)
E-mail: [e-mail]
Service time: 24 hrs a day,
7days a week

Turkey

Tel: [phone]（Turkish Service）
E-mail: [e-mail]
Service time: 9:00 AM to 6:00 PM,
7days a week

Italy

Tel: [phone]
E-mail: [e-mail]
Service time: 9:00 AM to 6:00 PM,
from Monday to Friday

Switzerland

Tel: [phone]
(German service)
E-mail: [e-mail]

Fee: 4-8 Rp/min, depending on

Service time: Monday to Friday
9:00 AM to 6:00 PM. GMT+1 or
GMT+2 (Daylight Saving Time)