Set Up Your Camera
Mount Your Camera
The camera is not waterproof when set on a table or shelf.
Mount the camera via Option 1, 2 or 3 when installing outdoors.
ST EP 1
DOWNLOAD APP
Get the Tapo app from the
App Store or Google Play.
Scan to download
Option 1: Wall Mount
1. Ax the Camera and Bracket
Route the camera power cord through the
opening of the bracket. Use two bracket screws
to ax the bracket and the camera.
Quick Start Guide
Outdoor Pan/Tilt Home Security
Wi-Fi Camera
Setup Video
Scan QR code or visit
https://www.tp-link.com/support/
setup-video/#cloud-cameras
7106510396 REV1.1.0 *Images may dier from actual products.
Option 2: Overhang Mount Option 3: Pole Mount
1. Ax the Camera and Bracket
Route the camera power cord through the
opening of the bracket. Use two bracket screws
to ax the bracket and the camera.
ST EP 2
POWER UP
Plug in the adapter to
power up your camera.
ST EP 3
SET UP
Tap the button in the app
and select your model.
Follow the app instructions
to complete setup.
3. Mount the Camera
Insert four mounting anchors into the holes, then
use the mounting screws to ax the camera and
bracket over the anchors.
2. Drill Holes
Stick the mounting template to the desired
mounting place. Drill four screw holes according
to the template.
Φ=6 mm (15/64 in.)
1. Ax the Camera and Bracket
Route the camera power cord through the
opening of the bracket. Use two bracket screws
to ax the bracket and the camera.
3. Mount the Camera
Insert four mounting anchors into the holes, then
use the mounting screws to ax the camera and
bracket over the anchors.
4. Connect to Power
Connect the camera to a power outlet using the
provided power adapter. Install the waterproof
seal for the power connectors.
Male Power Connector Waterproof Seal
Female Power Connector
2. Mount the Camera
Mount the camera on the pole using two
pole-mounting loops* (loop width ≤ 12mm).
2. Drill Holes
Stick the mounting template to the desired
mounting place. Drill four screw holes according
to the template.
Φ=6 mm (15/64 in.)
4. Connect to Power
Connect the camera to a power outlet using the
provided power adapter. Install the waterproof
seal for the power connectors.
Male Power Connector Waterproof Seal
Female Power Connector
*Pole-mounting loops
(not included)
3. Connect to Power
Connect the camera to a power outlet using the
provided power adapter. Install the waterproof
seal for the power connectors.
Male Power Connector Waterproof Seal
Female Power Connector
Appearance Button Explanation
1
2
System LED Indication
Solid red
Blinking red and green
Blinking red slowly
Solid amber
Solid green
Blinking red quickly
Blinking green quickly
Starting up
Ready for setup
Connecting to Wi-Fi
Connected to Wi-Fi
Connected to the cloud
Camera resetting
Camera updating
1
6
7
White Light LEDs
2
IR LEDs
Reset Button
Loosen the screws. While the camera is
powered on, use a pin to press and hold the
RESET button for at least 5 seconds until the
3
Lens
System LED blinks red. The camera will reset
and reboot.
4
System LED
microSD Card Slot
5
Microphone
Reset
6
microSD Card Slot
3
microSD
4
5
Safety Information
• Do not use damaged charger or USB cable to charge the
device.
• Do not use any other chargers than those recommended.
• Do not use the device where wireless devices are not allowed.
• Adapter shall be easily accessible.
• Use only power supplies which are provided by manufacturer
and in the original packing of this product. If you have any
questions, please don't hesitate to contact us.
• Keep the device away from re or hot environments. DO NOT
immerse in water or any other liquid.
• Do not disassemble, repair or modify the product.
• Do not use the product if the casing has been broken. Danger
of electric shock.
• Never touch the product with wet hands.
• Do not place near automatically controlled devices such as
re alarms. Radio waves emitted from this product may cause
such devices to malfunction resulting in an accident.
• Observe restrictions on using wireless products in fuel
depots, chemical plants or when blasting operations are in
progress.
• Do not use liquid to clean the product. Only use a dry cloth.
• Never put metal objects inside the product. If a metal object
enters the product turn o the circuit breaker and contact an
authorised electrician.
• This product is not intended to be used when providing
medical care. Consult the manufacturer of any personal
medical devices, such as pacemakers or hearing aids to
determine if they are adequality shielded from external RF
(radio frequency) energy.
8
9
• Do not use this product in health care facilities. Hospitals or
health care facilities may be using equipment that could be
sensitive to external RF energy.
• Do not place heavy objects on top of the product.
• When you leave the product unused for a long time unplug
the product from the power outlet.
• This product may interfere with other electronic products
such as TV, radios, personal computers, phones or other
wireless devices.
• Adapter should be used indoors where the ambient
temperature is lower than or equal to 40 ºC.
• Operating Temperature: -30 ºC ~ 60 ºC (-22 °F ~ 140 °F )
Please read and follow the above safety information when
operating the device. We cannot guarantee that no accidents
or damage will occur due to improper use of the device. Please
use this product with care and operate at your own risk.
TP-Link hereby declares that the device is in compliance with
the essential requirements and other relevant provisions of
directives 2014/53/EU, 2009/125/EC, 2011/65/EU and
(EU)2015/863. The original EU declaration of conformity may
be found at https://www.tapo.com/support/ce
TP-Link hereby declares that the device is in compliance with
the essential requirements and other relevant provisions of the
Radio Equipment Regulations 2017. The original UK declaration
of conformity may be found at
https://www.tapo.com/support/ukca/
7
Speaker
8
DC Power Connector
9
©2023 TP-Link
Loosen the screws and insert a microSD card*.
Initialize it on the Tapo app for local recording.
*microSD card not included.
DC Power Connector
Used to connect to a 12V DC power adapter
?
Visit www.tapo.com/support
for technical support, user guides,
and more information
Loading...