TOYOTA Prius PHV 2013 User Manual

1. Charging operation

How to charge

■ Charging equipment and names

Charging indicator
Charging inlet
Charging port lid

2

Charging port
Charging cable

PRIUS PHV_QG_OM47788U_(U)

■ The names of each part of the charging cable

1. Charging operation

Charging connector
Latch release button
CCID (Charging Circuit Inter-

rupting Device)
Plug

*

Power indicator
Error warning indicator
Test button
Reset button

*: The shape of the plug differs in accordance with the voltage and the target

region.

3

PRIUS PHV_QG_OM47788U_(U)

1. Charging operation

■ Confirm the following before charging

● The parking brake is applied.

● Lights such as the headlights, emergency flashers and interior

lights etc. are switched off.

If these light switches are turned ON, then these features will consume
electricity, and charging time will increase.

● The “POWER” switch is OFF.

■ How to charge

STEP

1

Prepare the charging cable.

STEP

2

Insert the charging cable into the
outlet of the external power
source.

Make sure to hold the body of the
plug and insert it firmly into the
outlet.

Check that the power indicator of
the CCID (Charging Circuit Inter­rupting Device) is illuminated.

In order to lessen the load on the
outlet and plug, hang the CCID
(Charging Circuit Interrupting
Device) on a hook etc. while the
plug is inserted.

4

PRIUS PHV_QG_OM47788U_(U)

1. Charging operation

STEP

3

Press the test button on the
CCID (Charging Circuit Interrupt­ing Device) to check that the
electrical leakage detection func­tion operates properly.

If the error warning indicator illu­minates when the test button is
pressed, the function is operating
correctly.

After the test has been com­pleted, press the reset button to
turn off the error warning indica­tor. Charging cannot be carried
out while the error warning indica­tor is illuminated.

If the error warning indicator does
not come on even if the test but­ton is pressed, it is likely that the
function is not operating correctly.
Stop charging immediately and
contact your Toyota dealer.

PRIUS PHV_QG_OM47788U_(U)

5

1. Charging operation

STEP

STEP

STEP

4

Press the charging port lid to
open.

The charging inlet light will illumi­nate.

5

Remove the charging connector
cap.

Affix the cap to the cable.

6

Insert the charging connector
into the charging inlet.

When inserting, make sure not to
press the latch release button.

6

PRIUS PHV_QG_OM47788U_(U)

Align with the guide position
shown on the underside of the
charging connector, and push in
until a click is heard.

1. Charging operation

STEP

7

Confirm that the charging indica­tor is illuminated. (When the
charging timer function is in use,
the light will turn off several sec­onds after illuminating.)

Charging will not start if the
charging indicator does not illumi­nate when the charging connec­tor is inserted.

The amount of time until charging
is completed can be checked on
the energy monitor by turning the
“POWER” switch to ON mode.

The charging indicator will turn off
when charging is completed.

PRIUS PHV_QG_OM47788U_(U)

7

1. Charging operation

■ After charging

STEP

STEP

STEP

STEP

1

Pull the charging connector
towards you while pressing the
latch release button.

If the charging connector is dis­connected during charging (while
the charging indicator is on),
charging will be interrupted.

2

Attach the charging connector cap.

3

Close the charging port lid.

4

Remove the plug from the outlet when the charging equip­ment will not be used for a prolonged period of time.

Hold the body of the plug when removing.
Make sure to put the cable away immediately after disconnecting.
When leaving the plug inserted, inspect the plug and connector once

a month to check if dirt or dust has accumulated.

8

PRIUS PHV_QG_OM47788U_(U)

1. Charging operation

■ Charging timer function

By using the charging timer function, deterioration of the hybrid bat­tery (traction battery) charge can be suppressed, and off-peak elec­tricity can be used effectively.

● A charging time can be assigned by setting the charging start time
or finish time.

● Once the time has been set, the time can be assigned again next
time simply by pressing the charging timer switch.

■ Setting the charging timer function

STEP

STEP

1

Stop the vehicle and press the
charging timer switch.

The multi-information display will
switch to the charging timer dis­play.

If not changing the set time: go to

STEP

6

2

Press and hold the charging
timer switch.

The time display will change from
solid to flashing.

PRIUS PHV_QG_OM47788U_(U)

9

1. Charging operation

STEP

STEP

3

Press the charging timer switch
to select a setting mode.

Start time setting mode
Finish time setting mode

The mode will switch with each
press of the charging timer
switch.

4

Adjust the set time using the time
adjustment button.

Adjust hours.
Adjust minutes.
Round to the nearest hour.

: e.g. 1:00 to 1:29 → 1:00

*

1:30 to 1:59 → 2:00

*

STEP

5

10

PRIUS PHV_QG_OM47788U_(U)

Press and hold the charging
timer switch.

Once set, the time display will
change from flashing to solid, and
the charging timer indicator on
the instrument cluster will come
on.

STEP

6

Turn the “POWER” switch off.

The charging timer indicator will start flashing.

STEP

7

Connect the charging cable to the vehicle.

Check that the charging indicator (→P. 2) has come on. It will turn off
after several seconds.
If the indicator does not come on, re-insert the charging connector. If
it still does not come on, check the power supply status using the
power indicator on the CCID (Charging Circuit Interrupting Device).

■ Canceling the charging timer function

If the charging timer switch is
pressed while the charging timer
indicator is illuminated or flash­ing, the charging timer function
will be canceled. Charging will
commence immediately if the
charging cable is connected to
the vehicle.

The charging timer indicator will
turn off if the charging timer func­tion is canceled.

1. Charging operation

PRIUS PHV_QG_OM47788U_(U)

11

1. Charging operation

■ Displays shown on the multi-information display

Each type of information related to charging is displayed on the multi­information display.

Time until charging is complete

If the “POWER” switch is turned
to ON mode during charging, the
current charging status and the
amount of time needed until
charging is complete will be dis­played on the energy monitor.

After confirming, switch the
“POWER” switch to OFF and turn
off the display. The “POWER”
switch will turn off automatically
after several tens of seconds.

Charging messages

12

The first time the “POWER”
switch is turned to ON mode
after charging is completed, a
message detailing the results of
the charging will be displayed.
Also, if an operation which can­not be carried out is attempted
during charging, a warning mes­sage will be displayed.

Comply with the instructions in
the message and carry out any
necessary operations.

The message may not be dis­played if the Remote Air Condi­tioning System has been used.

PRIUS PHV_QG_OM47788U_(U)

1. Charging operation

■ Inspecting the electrical leakage detection function

For safety, inspect the charging cable on a routine basis (at least
once a month).

Check that the electrical leakage detection function operates properly
by following the procedure below.

In the unlikely event that the electrical leakage detection function
does not operate properly, contact your Toyota dealer as soon as
possible.

STEP

1

Insert the charging cable into the outlet of the external power
source.

STEP

STEP

2

Press the test button on the
CCID (Charging Circuit Interrupt­ing Device).

If the error warning indicator illu­minates when the test button is
pressed, the function is operating
correctly.

3

Press the reset button on the CCID (Charging Circuit Inter­rupting Device).

Check that the error warning indicator turns off. Charging cannot be
carried out while the error warning indicator is illuminated.

Charging can be continued by following the normal procedure. If not
charging, put away the charging cable.

PRIUS PHV_QG_OM47788U_(U)

13

1. Charging operation

■ Safety functions

● The hybrid system will not start while the charging cable is attached to

the vehicle, even if the “POWER” switch is operated.

● If the charging cable is connected while the “READY” indicator is illumi-

nated, the hybrid system will stop automatically and driving will not be
possible.

● When the charging cable is connected to the vehicle, the shift position

cannot be changed from P to another position.

● If the latch release button is pressed, charging will not begin even if the

charging cable is connected.
Also, charging will be stopped if the latch release button is pressed and
held for several seconds during charging. When restarting charging, rein­sert the charging connector after pulling it out, and check that the charg­ing indicator illuminates.

14

PRIUS PHV_QG_OM47788U_(U)

1. Charging operation

CAUTION

■ When charging

Follow these points when charging. If you do not follow them, fire or electri­cal shock may occur, possibly resulting in death or serious injury.

● Connect to a power source suitable for charging.

● Check that the outlet, charging cable and charging inlet are not damaged.

● Check that the tips of the plug have not been deformed.

● If the plug is dirty or dusty, clean it before inserting.

● Plugging into the outlet that is located in a spot that is not high above the

ground or floor is recommended.

● Insert the plug firmly into the outlet.

● Do not touch the electrical terminals of the charging connector or short it

with foreign objects.

● Do not get water in the charging inlet.

Do not wash the vehicle while the charging cable is connected to the vehi­cle.

● Do not touch metal objects or pointed objects (needles etc.) to the port of

the charging inlet.

● Do not charge if the charging cable is coiled or bundled.

● Wrapping 120 V charging cable while in-use is not recommended because

cable may overheat. Failure to rewrap charging cable when not in-use
could result in strangulation or tripping hazard.

● After connecting the charging cable, confirm that it is not bent.

● Do not place heavy objects on the charging cable.

● If charging is interrupted, remove the charging connector before removing

the plug.

PRIUS PHV_QG_OM47788U_(U)

15

1. Charging operation

CAUTION

■ When charging

● When charging outdoors, make sure to connect to a weatherproof outlet

for outdoor use.
Also, if rain falls during charging, take care that rainwater does not run
along the length of cable and enter the outlet.

● Do not insert the plug if the outlet is submerged in water or snow.

If the plug has already been inserted and it is necessary to remove it, first
switch the circuit breaker OFF, then remove the plug.

● Follow these points when charging while it is raining or snowing.

• Check that no snow, water or ice has accumulated around t he charging
connector terminals and the vehicle charging inlet. Tap snow, water or
ice gently from connector prior to inserting charging connector into the
vehicle’s charging inlet.

• Do not connect the plug if your hands are wet. Also, do not get the plug
or outlet wet.

● Do not charge the vehicle during a lightning storm.

If you notice lightning while charging the vehicle, turn the circuit breaker
OFF and do not touch the vehicle and the charging cable.

■ After charging

Remove the plug if it will not be used for a long time.
Dirt and dust may accumulate plug or outlet, which could cause a

malfunction or fire, possibly leading to death or serious injury.

16

PRIUS PHV_QG_OM47788U_(U)

1. Charging operation

CAUTION

■ Power sources precautions

Observe the following precautions.
If you do not follow them, fire, electrical shock or damage may occur, possi­bly resulting in death or serious injury.

● Connect to an AC 120 V outlet (NEMA 5-15R) with a Ground-Fault Circuit-

Interrupter (GFCI) supplied by a circuit breaker per your local code. Use of
a 15A individual circuit is strongly recommended.

● Do not connect the charging cable to a

multi-outlet adapter, multi-plugs, or con­version plug.

ITO12P109

● Connecting the charging cable to an

extension cord is strictly prohibited. The
extension cord may overheat and does
not contain a Ground-Fault Circuit­Interrupter (GFCI).

ITO12P110

● Use of a block heater for charging is prohibited.

PRIUS PHV_QG_OM47788U_(U)

● Do not connect to a power strip.

17

1. Charging operation

CAUTION

■ Battery charger

The battery charger is located under the luggage compartment. Observe the
following precautions.
Failure to do so may cause death or serious injury from burns or electric
shocks.

● Do not touch the battery charger during charging, as it becomes hot.

● Do not disassemble, repair or modify the battery charger.

If repair is necessary, consult your Toyota dealer.

■ Routine inspection

Check the following points regularly.
If use is continued without inspection, fire or electric shock may occur,

possibly resulting in death or serious injury.

● The charging cable, plug, charging connector, CCID (Charging Circuit

Interrupting Device) etc. have not been damaged

● The outlet has not been damaged

● The plug does not get extremely hot during use

● The tip of the plug has not been deformed

● The plug is not dirtied by dust etc.

Inspect the plug after removing it from the outlet.

■ Maintaining the charging cable

When the cable is dirty, first remove the dirt with a hard, wringed cloth, and
then wipe the cable with a dry cloth. Do not wash with water, as doing so
could cause a fire or electrical shock when charging, which could lead to
death or serious injury.

■ When not using the charging cable for a long time

Remove the plug from the outlet. Dust could accumulate on the plug or in
the outlet, possibly causing overheating which could lead to a fire.
Also, keep the cable in a place free from moisture.

18

PRIUS PHV_QG_OM47788U_(U)

2. Plug-in Hybrid Applications

Plug-in Hybrid Applications is a service for plug-in hybrid vehicles.
These are added to the Safety Connect and Entune products.
The contents provide charge support, comfort support and drive sup-

port via the vehicle’s navigation system and the owner’s Smartphone.

Both of the following accounts are required for the services.

● Active Safety Connect account

● Active Toyota Entune account

Plug-in Hybrid Applications operation

The following functions can be used with the navigation system.

● Download of nearby charging stations to the map screen (Type A)

● View list of nearby charging stations and corresponding charging

station information (such as voltage supported) (Type B)
The function of Type B is a function added to Entune.
For details about the function, refer to http://www.toyota.com/entune/

.

19

PRIUS PHV_QG_OM47788U_(U)

3. Basic operation

How to operate the Remote Air Conditioning System

■ Activating the Remote Air Conditioning System

Press and hold the to
operate the Remote Air Condi-

tioning System.

The system will shut off if a door
is opened.

The system can be stopped by
pressing the twice.

■ Operating conditions

The system will only operate if all of the following conditions are met:

● The shift position is in P.

● The “POWER” switch is OFF.

● All doors are closed.

● The hood is closed.

● The brake pedal is not being depressed.

20

PRIUS PHV_QG_OM47788U_(U)

3. Basic operation

How to operate unlocking and locking the doors

■ Front door handles (including front passenger door handle if

equipped with entry function)

Grip the driver’s door handle to
unlock the door. Grip the passen­ger’s door handle to unlock all
the doors.

Make sure to touch the sensor on
the back of the handle.

The doors cannot be unlocked for
3 seconds after the doors are
locked.

*

*: The door unlock settings can be

changed. (Refer to “Owner’s
Manual”.)

Touch the lock sensor (the
indentation on the upper part of
the door handle) to lock the
doors.

PRIUS PHV_QG_OM47788U_(U)

21

3. Basic operation

■ Back door (vehicles with entry function of front and back

doors)

Press the unlock button to
unlock all the doors.

The doors cannot be unlocked for
3 seconds after the doors are
locked.

Press the lock button to lock all
the doors.

22

PRIUS PHV_QG_OM47788U_(U)

How to operate the power (ignition) switch

■ Starting the hybrid system

STEP

1

Check that the charging cable is disconnected.

STEP

2

Check that the parking brake is set.

STEP

3

Firmly depress the brake pedal.

Check that the “POWER” switch indicator turns green. If the indica­tor does not turn green, the hybrid system cannot be started.

When the shift position is N, the hybrid system cannot start. Shift the
shift position to P when starting the hybrid system.

3. Basic operation

STEP

STEP

4

Press the “POWER” switch.

The hybrid system can be started
from any “POWER” switch mode.

Continue depressing the brake
pedal until the hybrid system is
completely started.

5

Check that the “READY” indicator is on.

If the “READY” indicator changes from a flashing light to a solid light
and the buzzer sounds, the hybrid system is starting normally.

The vehicle will not move when the “READY” indicator is off.
The vehicle can move when the “READY” indicator is on even if the

engine is stopped. (The gasoline engine starts or stops automatically
in accordance with the state of the vehicle.)

PRIUS PHV_QG_OM47788U_(U)

23

3. Basic operation

■ Stopping the hybrid system

STEP

1

Stop the vehicle completely.

STEP

2

Set the parking brake.

STEP

STEP

STEP

3

Shift the shift position to P.

Check that the shift position indi­cator shows P.

4

Press the “POWER” switch.

The hybrid system will stop.

5

Slowly release the brake pedal and check that the indicator on
the “POWER” switch is off.

24

PRIUS PHV_QG_OM47788U_(U)

3. Basic operation

■ Changing “POWER” switch modes

Modes can be changed by pressing the “POWER” switch with the
brake pedal released. (The mode changes each time the switch is
pressed.)

Off

The emergency flashers can be
used.

ACCESSORY mode

Some electrical components such
as the audio system can be used.

The “POWER” switch indicator
turns amber.

ON mode

All electrical components can be
used.

The “POWER” switch indicator
turns amber.

PRIUS PHV_QG_OM47788U_(U)

25

3. Basic operation

Shift lever operation

■ Starting procedure

STEP

STEP

1

When the “READY” indicator
comes on, shift the shift position
to D or R and release it with the
brake pedal depressed. The D or
R position is selected and the
lever returns to its home position.
Confirm which position is
selected with the shift position
indicator in the instrument clus­ter.

2

Release the parking brake and
your foot from the brake pedal
gradually, and then start the
vehicle by depressing the accel­erator pedal gently.

26

PRIUS PHV_QG_OM47788U_(U)

■ Stopping procedure

3. Basic operation

STEP

STEP

1

Stop the vehicle completely by
depressing the brake pedal and
then apply the parking brake.

2

Shift the shift position to P.
Check that the shift position indi­cator on the instrument cluster is
in P, and release the brake pedal
gently after applying the parking
brake.

PRIUS PHV_QG_OM47788U_(U)

27

3. Basic operation

■ About engine braking

When shift position B is selected, releasing the accelerator pedal will apply
engine braking.

● When the vehicle is driven at high speeds, compared to ordinary gaso-

line-fueled vehicles, the engine braking deceleration is felt less than that
of other vehicles.

● The vehicle can be accelerated even when shift position B is selected.

If the vehicle is driven continuously in the B position, fuel efficiency will
become low. Usually, shift the shift position to D.

NOTICE

■ Hybrid battery (traction battery) charge

If the shift position is in N, the hybrid battery (traction battery) will not be
charged. To help prevent the battery from discharging, avoid leaving the N
position selected for an extended period of time.

28

PRIUS PHV_QG_OM47788U_(U)

How to operate the wipers and washers

■ Windshield wipers and washer

Type A

Intermittent wiper operation
Low speed wiper operation
High speed wiper operation
Temporary operation

Increases the intermittent
windshield wiper frequency

Decreases the intermittent
windshield wiper frequency

3. Basic operation

PRIUS PHV_QG_OM47788U_(U)

Washer/wiper dual operation

Wipers operate automatically.

29

3. Basic operation

Type B

Intermittent wiper operation
Low speed wiper operation
High speed wiper operation
Temporary operation

Increases the intermittent
windshield wiper frequency

Decreases the intermittent
windshield wiper frequency

30

Washer/wiper dual operation

Wipers operate automatically.

PRIUS PHV_QG_OM47788U_(U)

■ Rear window wiper and washer

Type A

Type B

3. Basic operation

Intermittent window wiper
operation

Normal window wiper opera­tion

Washer/wiper dual operation
Washer/wiper dual operation

Intermittent window wiper
operation

Normal window wiper opera­tion

Washer/wiper dual operation
Washer/wiper dual operation

PRIUS PHV_QG_OM47788U_(U)

31