NETWORK CAMERA
Model
IK-WR01A
Safety Precautions
For information on the latest products and peripheral
devices, refer to the following Web page.
■ http://www.netcam.toshiba.com
●The above URL is subject to change without prior notice.
If the URL changes, refer to the Toshiba website
(http://www.cctv.toshiba.com).
●The Operations Manual for this product is included on the
supplied CD-ROM.
●These Safety Precautions appy to firmware version
and later.
R 1.01
WR01-01
Introduction
Thank you for purchasing the IK-WR01A Network
Camera.
Before you start using the camera, read these Safety
Precautions carefully to ensure correct usage. Once
you have finished reading these Safety Precautions,
keep it in a convenient place for future reference.
The design, specifications, software, and manual
contents are subject to change without prior notice.
Some pictures and illustrations contained herein may
slightly differ from the actual images.
Terms and Trademarks
● The term “OS” is used in the Operations Manual to
indicate operating systems compatible with this
product.
-
Windows 2000: Microsoft® Windows® 2000 operating system
-
Windows XP: Microsoft® Windows® XP operating system
● The formal name of Windows® is Microsoft
Windows® Operating System.
● Microsoft
registered trademarks of Microsoft
the United States and other countries.
● Adobe is a registered trademark and Acrobat
Reader is a trademark of Adobe Systems
Incorporated.
● Other product names appearing in these Safety
Precautions or the Operations Manual may be
trademarks or registered trademarks of their
respective holders.
®
and Windows® are trademarks or
®
Corporation in
®
2
Accessories
Confirm that all of the following accessories have been
supplied with the network camera.
(a) CD-ROM ...................................................... 1pc.
Includes the Operations Manual and the
software Camera Finder.
(b) WARRANTY ................................................. 1pc.
(c) Safety Precautions and
Quick Start Guide (this document).............. 1pc.
* The Quick Start Guide is at the back of the
Safety Precautions.
(d) Mounting Base ............................................ 1pc.
(e) Bracket ........................................................ 1pc.
(f) Screw A ....................................................... 3pc.
(g) Screw B ....................................................... 3pc.
(h) Clear Dome Cover....................................... 1pc.
(i) Special Hexangular Wrench........................ 1pc.
(j) Monitor Out Harness Wire ........................... 1pc.
(k) RJ45 In-Line Coupler .................................. 1pc.
(l) Power connector ......................................... 1pc.
(m)Core A ......................................................... 1pc.
(n) Core B ......................................................... 1pc.
3
Table of Contents
Introduction… ............................................................... 2
Table of Contents .......................................................... 4
IMPORTANT SAFEGUARDS ......................................... 5
NOTES ON USE AND INSTALLATION........................ 10
Precautions for Use..................................................... 11
Camera Installation Guide .......................................... 12
For details on settings, operations, etc, refer to the
Operations Manual (PDF file) included on the CDROM.
Acrobat Reader is required to view the PDF file. If you
do not have Acrobat Reader , download it from the W eb
site of Adobe Systems Incorporated.
4
IMPORT ANT SAFEGUARDS
1. Read Instructions
All the safety and operating instructions should be read
before the product is operated.
2. Retain Instructions
The safety instructions and instruction manual should be
retained for future reference.
3. Heed Warnings
All warnings on the product and in the instruction manual
should be adhered to.
4. Follow Instructions
All operating and use instructions should be followed.
5. Cleaning
Disconnect this video product from the power supply
before cleaning.
6. Attachments
Do not use attachments not recommended by the video
product manufacturer as they may cause hazards.
7. Water and Moisture
Do not use this video product near water-for example, near
a bath tub, wash bowl, kitchen sink, or laundry tub, in a
wet basement, or near a swimming pool and the like.
8. Accessories
Do not place this video product on an unstable cart, stand,
tripod, bracket or table. The video product may fall,
causing serious injury to a child or adult, and serious
damage to the product. Use only with stand, tripod,
bracket, or table recommended by the manufacturer, or
sold with the video product. Any mounting of the product
should follow the manufacturer's instructions, and should
use a mounting accessory recommended by the
manufacturer.
5
IMPORT ANT SAFEGUARDS (Cont.)
9. Ventilation
This video product should never be placed near or over a
radiator or heat register . This video pr oduct should not be
placed in a built-in installation such as a bookcase or rack
unless proper ventilation is provided or the manufacturer's
instructions have been adhered to.
10. Power Sources
This video product should be operated only from the type
of power source indicated on the marking label. If you are
not sure of the type of power supply to your location,
consult your product dealer.
11. Power-Cord Protection
Power-Supply cords should be r outed so that they are not
likely to be walked on or pinched by items placed upon or
against them, paying particular attention to cords at plugs,
screws and the point where they exit from the product.
12. Installation
This video product should be installed on a firm and solid
part of the ceiling or wall. If installed on a soft and weak
place, the camera unit may fall. A person under it may be
injured and things under it may be damaged.
13. Lightning
For added protection for this video product during a
lightning storm, or when it is left unattended and unused
for long periods of time, unplug it from the wall outlet and
disconnect the power supply and cable system. This will
prevent damage to the video product due to lightning and
power-line surges. If lightning occurs, do not touch the unit
or any connected cables in order to avoid electric shock.
14. Overloading
Do not overload power supply and extension cords as
this can result in a risk of fire or electric shock.
15. Object and Liquid Entry
Never push objects of any kind into this video product
through openings as they may touch dangerous voltage
points or short-out parts that could result in a fire or electrical
shock. Never spill liquid of any kind on the video product.
6
16. Servicing
Do not attempt to service this video product yourself as
opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified
service personnel.
17. Damage Requiring service
Disconnect this video product from the power supply and
refer servicing to qualified service personnel under the
following conditions.
a. When the power-supply cord or plug is damaged.
b.If liquid has been spilled, or objects have fallen into the
video product.
c. If the video product has been exposed to rain or water.
d. If the video product does not operate normally by
following the operating instructions in the instruction
manual. Adjust only those controls that are covered by
the instruction manual as an improper adjustment of
other controls may result in damage and will often
require extensive work by a qualified technician to
restore the video product to its normal operation.
e. If the video product has been dropped or the cabinet
has been damaged.
f. When the video product exhibits a distinct change in
performance-this indicates a need for service.
18. Replacement Parts
When replacement parts are required, be sure the service
technician has used replacement parts specified by the
manufacturer with the same characteristics as the original
part. Unauthorized substitutions may result in fire, electric
shock or other hazards.
19. Safety Check
Upon completion of any service or repairs to this video
product, ask the service technician to perform safety
checks to determine that the video product is in proper
operating condition.
7
IMPORT ANT SAFEGUARDS (Cont.)
The CAUTION label, shown on the above part, is attached
on the camera.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to alert
the user to the presence of uninsulated
"dangerous voltage" within the product's
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
WARNING:
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN
OR MOISTURE.
FIELD INSTALLATION:
WORDED : “THIS INSTALLATION SHOULD BE MADE BY A QUALIFIED SERVICE
PERSON AND SHOULD CONFORM TO ALL LOCAL CODES.”
CAUTION:
CONNECT 24V AC UL LISTED
CLASS 2 POWER SUPPLY.
8
FCC NOTICE
This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference when the equipment is operated in a
commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction
manual, may cause harmful interference to radio
communications. Operation of this equipment in a
residential area is likely to cause harmful interference in
which case the user will be required to correct the
interference at his own expense.
USER-INSTALLER CAUTION : Y our authority to operate
this FCC verified equipment could be voided if you make
changes or modifications not expressly approved by the
party.
Serial No Label
The serial No. label is located here.
9
NOTES ON USE AND INSTALLA TION
• Do not aim the camera at the sun
Do not aim the camera at the sun or point it at sun even if
you are not shooting.
• Do not shoot intense light
Intense light such as a spotlight may cause a bloom or
smear. A vertical stripe may appear on the screen.
However, this not a malfunction.
• Treat the camera with care
Do not drop the camera or subject it to strong shock or
vibration. Otherwise, the camera may malfunction.
• Never touch internal parts
Do not touch the internal parts of the camera other than
the parts specified. Otherwise, the camera may
malfunction.
• Install the camera
Where no video noise appears
If cables are wired near electric lighting wires or a TV set,
noise may appear in images. In this event, relocate cables
or reinstall equipment.
• Check the ambient temperature and humidity
Avoid using the camera where the temperature is hotter
or colder than specified. Otherwise, the quality of images
may deteriorate or internal parts may be affected. Special
care is required to use the camera at high temperature
and humidity.
• Should you notice any trouble
If any trouble occurs while you are using the camera, turn
off the power and contact your dealer. Continued use in
this state might cause fire or electric shock. For details on
repair, consult the place of purchase, or please contact
the technical support number.
10
Precautions for Use
About the AC Adapter
● An AC adapter is not supplied with this model. If you
want to use an AC adapter , you will need to provide an
AC adapter capable of supplying at least 10 W.
About the Power supply
● The IK-WR01A operates with one of the following power
source: 12vDC, 24vAC or PoE. Set the power selection
switch on the camera to the correct power source
before turning the camera on. DO NOT RE-SET THE
POWER SELECTION SWITCH WHEN THE UNIT IS ON.
About the PoE Power Supply Device
● A PoE power supply device is required for supplying
power to the camera via the LAN cable.
● Use IEEE802.3af-compliant PoE devices.
● Use a 4 pair twisted cable for the LAN cable to
connected the camera to a PoE compatible hub.
About the software
This product contains a piece of software (hereafter the
Software) licensed to TOSHIBA CORPORATION
(hereafter TOSHIBA) by TOPCO CORPORATION.
(hereafter TOPCO).
The copyright and other intellectual property rights of the
software are held by TOPCO or the licensor.
The software is protected by the Copyright Law , Universal
Copyright Convention, and other intellectual property laws
and agreements. The permission of TOPCO or the licensor
must therefore be obtained before the software can be
reproduced.
Note, however, that the software is partly covered under
the GNU General Public License Version 2 (hereafter
GPL2). Y ou can obtain a copy of GPL2 at http://www.fsf.org/
copyleft/gpl.html. TOPCO will provide the GPL-covered
source code of the software in accordance with the terms
of GPL2. Contact TOPCO if you need it for more information.
11
Camera Installation Guide
Installation Example
Wall
∅6mm
(0.24inch)
SCREWx4
∅4mm (0.16inch)
46.0mm
(1.81inch)
SURFACE MOUNT INSTALLATION
Unit: mm (inches)
100mm
(3.94inch)
MINIMUN
20mm (0.79inch)
83.5mm
(3.29inch)
EIM-0010325 4/26/2000
The Installation Guide is for reference only.
Mounting bracket is not included.
12
Unit: mm (inches)
Wall
∅6mm
(0.24inch)
SCREWx4
∅4mm (0.16inch)
46.0mm
(1.81inch)
FLUSH MOUNT INSTALLATION
100mm
(3.94inch)
MINIMUN
20mm (0.79inch)
83.5mm
(3.29inch)
13
Memo
14
15
TOSHIBA AMERICA INFORMATION SYSTEMS. INC
Security & Network Video Products
9740 Irvine Boulevard,
Irvine California 92618-1697
Phone Number: (877)696-3822
Loading...