Toshiba IK-WB82A Quick Start Manual
NETWORK CAMERA
Model: IK-WB82A
Quick Start Guide and Important Safeguards
This guide describes the hardware installation.
Refer to the user's manual (PDF le) contained in the CD-ROM for settings, operations
and other information.
The application Adobe® Reader
®
is needed to view PDF les. If you do not have this
application, download it from the Adobe Systems Incorporated website.
n
http://www.adobe.com/
For information on our latest products and peripheral devices, refer to the following
Website:
n
http://www.toshibasecurity.com
If the URL changes, refer to the Toshiba website (http://www.toshiba.com).
22
Introduction
FCC (USA)-INFORMATION
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for
a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the
interference at his own expense.
CAUTION: Your authority to operate this FCC veried equipment could be
voided if you make changes or modications not expressly approved by the party
responsible for compliance to Part 15 of the FCC Rules.
3
Thank you for purchasing the IK-WB82A Network Camera. Before using the
camera, read this Quick Start Guide and Important Safeguards ("Guide") carefully
to ensure correct usage. After reading this Guide, save it for future reference.
The design, specications, software, and this Guide's contents are subject to
change without prior notice.
Terms
l
The term "OS" is used in this manual to indicate operating systems compatible
with this product.
--
Microsoft® Windows® 7 Professional Edition
NOTE
l
The performance of the network camera may vary depending on the network
environment.
44
Table of Contents
Introduction .......................................................................................................2
FCC (USA)-INFORMATION .......................................................................................2
Terms ........................................................................................................................3
Table of Contents.............................................................................................. 4
Important Safeguards .......................................................................................5
Important Safeguards (Cont.) ...........................................................................7
Notes on Use and Installation...........................................................................8
Setting the Network Camera Environment .......................................................9
Items needed for network camera monitoring ...........................................................9
Package Contents ..........................................................................................10
Physical Description ........................................................................................11
Hardware Installation .....................................................................................12
Cabling Assembly .......................................................................................... 14
Network Deployment .....................................................................................16
Assigning IP Address ......................................................................................18
Retrieving Images...........................................................................................19
Adjusting the direction and Silica Gel .............................................................20
Adjusting the Zoom and Focus .......................................................................21
Completion .....................................................................................................22
Trademarks ....................................................................................................23
5
Important Safeguards
1. Read Instructions
Read this Guide and User’s Manual before operating the product.
2. Retain Instructions
Retain this Guide and User's Manual for future reference.
3. Warnings
Acknowledge all warnings on the product and in the User's Manual.
4. Follow Instructions
Follow instructions in this Guide and User’s Manual.
5. Cleaning
Disconnect this product from the power supply before cleaning.
6. Attachments and Accessories
Do not use any attachment and accessories other than recommended and authorized
ones by the camera manufacturer as they may pose safety risks.
7. Mount the Product on Appropriate Place
Do not mount the product on an unstable cart, stand, tripod, bracket or table. The product
may fall, causing serious injury to a person, or serious damage to the product. Mount the
product only in places where Toshiba recommends in the Guide and/or the User's Manual.
8. Use the Product under Appropriate Temperature
This product should never be placed near or over a radiator or heat register. If this product
is placed in a built in installation verify that there is proper ventilation so that the camera
temperature operates within the recommended temperature range.
9. Power Sources
This product should be operated only from the type of power source indicated on the
information label attached to the product.
10. Power-Cord Protection
Power cords should be routed so that they are not likely to be walked on, pinched, or
damaged by items placed upon or against them. Pay particular attention to cords at plugs,
screws and the point where they exit the product.
11. Installation
Install this product on a secure part of the ceiling or wall. If installed on an unsecured
location, the product could fall causing injury and damage.
66
12. Lightning
If lightning occurs, do not touch the product or any connected cables in order to avoid
electric shock. This product may have damage due to lightning and power-line surges
during a lightning storm. For additional protection on this product, when it is left unattended
and unused for long periods of time, unplug it from the wall outlet and disconnect the
power supply and cable system.
13. Overloading
Do not overload the power supply or extension cords as it could result in a risk of re or
electric shock.
14. Object and Liquid Entry
Never push objects of any kind into this camera through openings as they may touch
dangerous electrical points or short-out parts that could result in a re or electrical shock.
Never spill liquid of any kind on the camera.
15. Do Not Maintain the Product by Yourself
Do not x, repair or maintain the product by yourself. This may expose you to dangerous
electrical or other hazards. Refer all servicing to qualied service personnel.
16. Damage Requiring Service
Disconnect this product from the power supply and refer servicing to qualied service
personnel under the following conditions.
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the product.
c. If the product has been submerged in water.
d. If the product does not operate normally although you use it under the operating
instructions in the User's Manual. Adjusting or maintaining the product by yourself in a
manner not authorized by the User's Manual may result in damage and will often require
extensive work to restore the product to its normal operation.
e. If the product has been dropped or its cabinet has been damaged.
f. When the product exhibits a distinct change in performance which indicates a need for
service.
g. Any other trouble with the product.
17. Replacement Parts
When replacing parts be sure the service technician uses parts specied by the
manufacturer or have the same characteristics as the original part. Using unauthorized
replacement parts may result in re, electric shock or other hazards.
18. Safety Check
Upon completion of any service or repairs to this product, ask the service technician to
perform safety checks to determine that the product is in proper operating condition.
7
Important Safeguards (Cont.)
CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning ash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product's enclosure that may be of
sufcient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
WARNING:
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT SUBMERGE
THIS PRODUCT IN WATER.
FIELD INSTALLATION MARKING:
WORDED: “THIS INSTALLATION SHOULD BE MADE BY A QUALIFIED SERVICE
PERSON AND SHOULD CONFORM TO ALL LOCAL CODES.”
The unit is intended to be supplied by an UL listed power supply suitable for using
at Tma min. 50 degree C and whose output rated 36-57Vdc, min. 340-210 mA or
12Vdc, min. 1.02 A and met SELV and LPS; an UL listed end-product suitable for
using at Tma min. 50 degree C and with "PoE" connector complied SELV and LPS
and rated 36-57Vdc, min. 340-210 mA.
The unit is to be connected only to PoE networks without routing to the outside
plant.
Ce produit est conçu pour être alimenté par un adaptateur secteur UL pour une
l’utilisation à Tma min. 50 degrés C et avec une sortie nominale de 36-57V DC,
min. 340-210 mA ou 12V DC, min. 1.02 A et conforme avec SELV et LPS; un
produit nal UL pour une utilisation à Tma min. 50 degrés C et avec un connecteur
"PoE" conforme à SELV et LPS et une sortie nominale de 36-57V DC, min. 340-210
mA.
L’appareil doit être connecté uniquement aux réseaux PoE sans routage à
l’equipement extérieur.
Tma: the maximum ambient temperature
SELV: Secondary Extra Low Voltage
LPS: Limited Power Source
88
Notes on Use and Installation
l
Do not aim the product at the sun
Never aim the product at the sun even with the product power off.
l
Do not shoot intense light
Intense light such as a spotlight to the product may cause a bloom or smear. A
vertical stripe may appear on the screen. However, this is not a malfunction.
l
Treat the product with care
Dropping or impacting the product may cause it to malfunction.
l
Avoid Volatile Liquid
Do not use volatile liquids, such as an insect spray, near the product. Do not
leave rubber or plastic products on the product for a long time. They will leave
marks on the product. Do not use a chemically saturated cloth.
l
Never touch internal parts
Do not touch the internal parts of the product other than the parts specied in
the User's Manual.
l
Do not submerge in water
The product has some protection to water (see IP rating), and can be used
indoors or outdoors. If the product was submerged in water, turn off the power
and contact your dealer.
l
Keep the product away from video noise
If cables of the product are wired near electric lighting wires or a TV set, noise
may appear in images. In this case, relocate cables or reinstall the product.
l
Check the ambient temperature and humidity
Avoid using the product where the temperature is hotter or colder than the
specied operating range in the User's Manual. Doing so could affect the
internal parts or cause the image quality to deteriorate. Special care is required
to use the product at high temperature and humidity.
l
Should you notice any trouble
If any trouble occurs while you are using the product, turn off the power and
contact your dealer. If you continue to use the product with the trouble or
malfunction, the trouble may get worse and an unpredictable problem may
occur.
Loading...