Toshiba 19LV505 User Manual

Introduction

J50S0101A.indb 1

08.1.9 4:44:32 PM

19/22-inch* Diagonal LCD TV/DVD COMBINATION

19LV505 19LV506 22LV505

OWNER’S MANUAL

Connections

Basic setup

TV operation

Basic playback

Advanced playback

Function setup

Others

IIIustration of 19LV505

J50S0101A.indb 1

Owner·s Record

The model number and serial number are on the back of your TV/DVD. Record these numbers in the spaces below. Refer to these numbers whenever you communicate with your Toshiba dealer about this TV/DVD.

Model number: Serial number:

08.1.9 4:44:32 PM

Introduction

J50S0101A.indb 2

08.1.9 4:44:39 PM

Dear Customer,

Thank you for purchasing this Toshiba LCD TV or TV/DVD Combination television.

This manual will help you use the many exciting features of your new LCD TV. Before operating your LCD TV or TV/DVD Combination, please read this manual completely, and keep it nearby for future reference.

Safety Precautions

WARNING: TO REDUCE THE RISK OF FIRE OR

ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle, is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

CAUTION: To reduce the risk of electric shock,

do not use the polarized plug with an extension cord, receptacle, or other outlet unless the blades can be inserted completely to prevent blade exposure.

WARN ING: If you decide to wall mount this television, always use a UL Listed wall bracket appropriate for the size and weight of this television. The use of any wall bracket other than a UL Listed wall bracket appropriate for the size and weight of this television for wall mounting this television could result in serious bodily injury and/or property damage.

ENE RGY STAR® qualified TV. Products that earn the ENE RGY STAR prevent green house gas emissions by meeting strict energy efficiency guidelines set by the U.S. Environmental Protection Agency and the U.S. Department of Energy. ENERGY STAR and the EN ERGY STAR mark are registered U.S. marks.

This is a reminder to call the CATV system installer’s attention to Article 820-40 of the NEC, which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to grounding system of the building, as close to the point of cable entry as practical. For additional antenna grounding information, see item 27 on page 5.

Child Safety

It Makes A Difference Where Your TV Stands

Congratulations on your purchase! As you enjoy your new TV, keep these safety tips in mind:

The Issue

If you are like most consumers, you have a TV in your home. Many homes, in fact, have more than one TV.

The home theater entertainment experience is a growing trend, and larger TVs are popular purchases; however, they are not always supported on the proper TV stands.

Sometimes TVs are improperly secured or inappropriately

situated on dressers, bookcases, shelves, desks, audio

speakers, chests, or carts. As a result, TVs may fall over,

causing unnecessary injury.

Toshiba Cares!

The consumer electronics industry is committed to

making home entertainment enjoyable and safe.

The Consumer Electronics Association formed the

Home Entertainment Support Safety Committee,

comprised of TV and consumer electronics furniture

manufacturers, to advocate children’s safety and educate

consumers and their families about television safety.

Tune Into Safety

One size does NOT fit all! Use appropriate furniture large enough to support the weight of your TV (and other electronic components).

Use appropriate angle braces, straps, and anchors to secure your furniture to the wall (but never screw anything directly into the TV).

Carefully read and understand the other enclosed instructions for proper use of this product.

Do not allow children to climb on or play with furniture and TVs. Avoid placing any item on top of your TV (such as a VCR, remote control,

or toy) that a curious child may reach for. Remember that children can become excited while watching a program

and can potentially push or pull a TV over.

NOTE TO CATV INSTALLERS

Share our safety message about this hidden hazard of your family and friends. Thank you!

2500 Wilson Blvd. Arlington, VA 22201 U.S.A. www.CE.org

CEA is the Sponsor, Producer and Manager of the International CES

the home with

J50S0101A.indb 2

08.1.9 4:44:39 PM

FCC compliance information

J50S0101A.indb 3

08.1.9 4:44:41 PM

CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS POLARIZED PLUG WITH AN EXTENSION CORD, RECEPTACLE

OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

FCC Declaration of Conformity Compliance Statement (Part 15):

The Toshiba 19LV505, 19LV506, 22LV505, LCDTV/DVD Combination complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The party responsible for compliance to these rules is: Toshiba America Consumer Products, L.L.C.

82Totowa Rd. Wayne, NJ 07470. Ph: (800) 631-3811 or visitTACP·s website at www.tacp.Toshiba.com

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the

FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by removing and applying power to the equipment, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and the receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Changes or modifications to this equipment not expressly approved by Toshiba could void the user·s authority to operate this

equipment.

Introduction

CAUTION:

THIS DIGITAL VIDEO PLAYEREMPLOYS A LASER SYSTEM. TO ENSURE PROPER USE OF THIS PRODUCT, PLEASE READ

THIS OWNER'S MANUAL CAREFULLYAND RETAIN FOR FUTURE REFERENCE. SHOULD THE UNIT REQUIRE MAINTENANCE, CONTACT AN AUTHORIZED SERVICE LOCATION.

USE OF CONTROLS, ADJUSTMENTS OR THE PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAYRESULT IN HAZARDOUS RADIATION EXPOSURE.

TO PREVENT DIRECT EXPOSURE TO LASER BEAM, NEVER OPEN THE ENCLOSURE. VISIBLE LASER RADIATION MAY BE PRESENT WHEN THE ENCLOSURE IS OPENED. NEVER STARE INTO BEAM.

Location of the required Marking

The rating sheet and the safety caution are the rear of the unit.

Illustration of 19LV505

CERTIFICATION: COMPLIES WITH FDA RADIATION PERFORMANCE STANDARDS, 21 CFR SUBCHAPTER J.

ON DISPOSAL

The lamp(s) inside this product contain mercury. Disposal may be regulated due to environmental considerations. For disposal or recycling information, contact your local authorities or the Electronic Industries Alliance (www.eiae.org).

J50S0101A.indb 3

08.1.9 4:44:41 PM

Introduction

J50S0101A.indb 4

08.1.9 4:44:43 PM

SAFETY INSTRUCTIONS

Important Safety Instructions

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer·s instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus

(including ampliﬁ ers) that produce heat.

Do not defeat the safety purpose of the polarized or

9) grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong.

The wide blade or the third prong

are provided for your safety. If the provided plug does not ﬁ t into your outlet, consult an electrician for

replacement of the obsolete outlet.

10)

Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11) Only use attachments/accessories speciﬁ ed by the

manufacturer.

Use only with the cart, stand, tripod,

12)

bracket, or table speciﬁ ed by the manufacturer, or sold with the apparatus.

caution when moving the cart/ apparatus combination to avoid

injury from tip-over.

13)

Unplug this apparatus during lightning storms or when unused

for long periods of time.

14) Refer all servicing to qualiﬁ ed service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

When a cart is used, use

Wide plug

Additional Safety Precautions

14a) CAUTION: If the TV is dropped and the cabinet or enclosure surface has been damaged or the TV does

not operate normally, take the following precautions:

• ALWAYS turn off the TV and unplug the power

cord to avoid possible electric shock or ﬁ re.

• NEVER allow your body to come in contact with

any broken glass or liquid from the damaged television. The LCD panel inside the TV contains

glass and a toxic liquid. If the liquid comes in contact

with your mouth or eyes, or your skin is cut by

broken glass, rinse the affected area thoroughly

water and consult your doctor.

15) To avoid damage to this product, never place or

store the TV in direct sunlight; hot, humid areas; or areas subject to excessive dust or vibration.

with

Installation, Care, and Service

Installation

Follow these recommendations and precautions and heed all warnings when installing your TV:

16)

Never modify this equipment. Changes or modiﬁ cations may void: a) the warranty, and b) the user·s authority operate this equipment under the rules of the Federal Communications Commission.

17) DANGER: RISK OF SERIOUS

stand, or table. The TV may fall, causing serious personal injury, death, or serious damage to the TV.

18) Never place items such as vases, aquariums, or candles on top of the TV.

19) WARNING: To prevent injury, this apparatus must be securely attached to the ﬂ oor/wall in accordance with the installation instructions. Always place the TV on the ﬂ oor or a sturdy, level, stable surface that can

support the weight of the unit. Use a sturdy tie between the TV·s rear hook

and the rear wall, pillar,

etc., to secure If you use a TV stand, fasten the TV to the stand attached band (under the TV pedestal).

20)

Never expose the apparatus to dripping or splashing liquid or place items such as vases, aquariums, any other item ﬁ lled with liquid, or candles on top of the TV.

21)

Never block or cover the slots or openings in the TV cabinet back, bottom, and sides.

Never place the TV:

•

on a bed, sofa, rug, or similar surface;

• too close to drapes, curtains, or walls; or

• in a conﬁ ned space such as a bookcase, built-in cabinet, or any other place with poor ventilation.

The slots and openings are provided to protect the TV from overheating and to help maintain reliable operation of the TV. Leave a space of at least 4 inches around the TV.

22) Always place the back of the television at least one (1) inch away from any vertical surface (such as a wall) to allow proper ventilation.

23) Never allow anything to rest on or roll over the power cord, and never place the TV where the power cord is subject to wear or abuse.

24) Never overload wall outlets and extension cords. Always operate the TV with a 120V AC, 60Hz power source only.

25)

CAUTION: To reduce the risk of electric shock, do not use the polarized plug with an extension cord, receptacle, or other outlet unless the blades can be inserted completely with three-wire grounding type to prevent blade exposure.

PERSONAL INJURY, DEATH, OR EQUIPMENT DAMAGE! Never place

the TV on an unstable cart,

Sturdy tie (as short as possible; min. 1 in.)

Hooks

the TV .

using the

TV side

Band

TV top

Clip

Screw

J50S0101A.indb 4

08.1.9 4:44:43 PM

SAFETY INSTRUCTIONS

J50S0101A.indb 5

08.1.9 4:44:45 PM

(Continued)

Installation (cont. from previous page)

26) Always make sure the antenna system is properly grounded to provide adequate protection against voltage surges and built-up static charges (see Section 810 of the National Electric Code.)

Antenna

Ground clamp

Electric service

equipment

Power service grounding

electrode system

(NEC Art 250 Part H)

27) DANGER: RISK OF SERIOUS

PERSONAL INJURY OR DEATH!

• Use extreme care to make sure you

(or any item such accidentally touch overhead power lines.

Never locate the antenna near overhead

power lines or other electrical circuits.

•

Never attempt to install any of the following during lightning activity: a) an antenna system; or b) cables, wires, or any home theater component connected

to an antenna or phone system.

are never in a position where your body

you are in contact with,

as a ladder or screwdriver) can

lead-in wire

Antenna discharge unit (NEC Section 810-20)

Grounding conductors (NEC Section 810-21)

Ground clamps

Care

For better performance and safer operation of your TOSHIBA TV, follow these recommendations and precautions:

28)

Always unplug the TV before cleaning.

Wipe the display panel surface

gently using only a soft cloth (supplied.) A hard clo t h m a y damage the surface of the panel. Avoid contact with alcohol, thinner, benzene, acidic or and alkaline solvent cleaners, abrasive cleaners, surface may be impaired.

29)

any kind into the TV cabinet slots.

WARNING: RISK OF ELECTRIC SHOCK!

Never spill liquids or push objects of

or chemical cloths, as the

Care (cont. from previous column)

33)

Keep your ﬁ ngers well clear of the disc slot as it is closing.

Failure to do so may cause serious personal injury.

34) When you use headphones, keep the volume at a moderate level. Using headphones continuously

at a high volume may cause hearing damage.

35)

NEVER look directly into the disc slot or ventilation slots at the source of the laser beam. Doing so may cause sight damage.

36) NEVER use a cracked, deformed, or repaire disc. Such discs are easily broken and may cause serious personal injury or product damage. SUCH DAMAGE IS NOT COVERED UNDER YOUR WARRANTY.

37) WARNING: RISK OF SERIOUS PERSONAL

INJURY OR EQUIPMENT DAMAGE!

• Never strike the screen with a sharp or heavy

object.

• Never touch, press, or place anything on the

LCD screen. These actions will damage the LCD screen If you need to clean the LCD screen, follow the instructions in item 28 on this page.

Service

38) Never attempt to service the TV

expose you to dangerous voltage or other hazards.

Refer all servicing to a Toshiba Authorized Service Center.

39) If you have the TV serviced:

•

Ask the service technician to use only replacement

parts speciﬁ ed by the manufacturer.

• Upon completion of service, ask the service

technician to perform routine safety checks to

determine that the TV is in safe operating condition.

40) When the TV reaches the end of its useful life,

ask a qualiﬁ ed service technician to properly dispose of the TV.

WARNING: RISK OF ELECTRIC SHOCK!

yourself. Opening and removing the covers may

Introduction

30)

While it is thundering, do not touch the connecting

cables or apparatus.

31)

For added protection of your TV from lightning and power surges, always unplug the power cord and disconnect the antenna from the TV if you leave the TV unattended or unused for long periods of time.

32)

During normal use, the TV may make occasional snap ping or popping sounds. This is normal, especially when

the unit is being turned on or off. If these sounds become frequent or continuous, unplug the power cord and

contact a Toshiba Authorized Service Center.

J50S0101A.indb 5

08.1.9 4:44:45 PM

Introduction

J50S0101A.indb 6

08.1.9 4:44:46 PM

Precautions

Choosing a location for your LCD TV

Q Retractable pedestal stand and locating the LCD TV

Observe the following safety precautions:

1) Ensure that unpacking and transfer of the unit is carried out by two or more people.

2) Put the LCD TV on a large level area in a recumbent posture.

3) Grab the pedestal stand and lift the display up. Conﬁ rm the pivot is locked.

4) Place the TV on a sturdy, level surface that can support the weight of the TV.

5) Be sure to secure the TV to a wall, pillar, surface, or other immovable structure. To secure the TV in this manner, use the included strap located at the rear of pedestal stand. (see item 19, page 4).

Q To fold the pedestal stand

1) Slide the lever on the back side of the pedestal stand to the left.

2) Lay the display down. Slide the lever to the left

Back side of the pedestal stand

NOTE: Do not operate the LCD TV while the pedestal stand is folded.

Q To Display your LCD TV using a Wall Bracket:

If you decide to wall mount your LCD TV, always use a UL Listed wall bracket appropriate for the size and weight of the LCD TV (see page 2):

1) CAUTION: Two people are required for installation.

2) Unplug and remove any cables and/or other component

connectors from the rear of the TV.

3) Follow the instructions provided with your wall bracket.

Before proceeding, make sure the appropriate bracket(s) are attached to the wall and the back of the TV as described in the instructions provided with the wall bracket.

4) After attaching the appropriate bracket(s) to the wall and the back

of the TV, remove the pedestal stand from the TV as described below.

Q Removing the Pedestal Stand

1) Carefully lay the front of the unit face down on a ﬂ at, cushioned

surface such as a quilt or blanket. Leave the stand protruding over the edge of the surface.

NOTE: Extreme care should always be used when removing

the pedestal stand to avoid damage to the LCD panel.

2) Remove the two screws shown in the diagram below.

This will allow removal of the pedestal stand.

3) Once you have removed all two screws holding the pedestal

stand in place, remove the pedestal stand from the TV by sliding the pedestal stand away from the TV.

Important notes about your LCD TV

The following symptoms are technical limitations Display technology and are not an indication of malfunction; therefore, Toshiba is not responsible resulting from these symptoms.

1) An after image (ghost) may appear on the screen if a ﬁ xed, non-moving image is displayed for a long period of time. The after image is not permanent and will disappear in a short period of time.

2) The LCD panel contained in this TV is manufactured using an extremely high level of precision technology; be an occasional pixel (dot of light) (does not light, remains constantly lit, etc.). This is a structural property of LCD not covered under your warranty. Such pixels are not visible when the picture is viewed from a normal viewing distance.

Note: Interactive video games that involve shooting a “gun” type of joystick at an on-screen target may not work on this TV.

technology, is not a sign of malfunction, and is

for perceived defects

that does not operate properly

of LCD

however, there may

Notes on handling

Q Do not subject the LCD panel to physical shock, such it. It may cause unit damage and malfunction. Q When shipping the unit, the original shipping carton and packing materials come in handy. For fully protection, repack the unit as it was originally packed at the factory. Q Do not use volatile liquids, such as insecticide, near the unit. Do not leave rubber or plastic products in contact with the unit for prolonged periods of time. Doing so will leave marks on the ﬁ nish.

The top and rear panels of the unit may become warm

period of use. This is not a malfunction. Q When the unit is not in use, always remove the disc and turn off the power.

as dropping

after a long

Notes on locating the unit

Q When you place this unit near a TV, radio, or VCR, the playback

picture may become poor and the sound may be distorted. In this case, place the unit away from the TV, radio, or VCR.

Q To avoid damage to this product, never place or store the

TV/DVD in direct sunlight; hot, humid areas; or areas subject to excessive dust or vibration.

J50S0101A.indb 6

Two screws

08.1.9 4:44:46 PM

Prcautions (Continued)/Notes on discs

J50S0101A.indb 7

08.1.9 4:44:50 PM

Notes on moisture condensation

Moisture condensation damages the unit. Please read the following carefully.

Moisture condensation occurs, for example, when you pour a cold drink into a glass on a warm day and drops of water form on the outside of the glass. In the same way, moisture may condense on this unit·s internal optical pick-up lens, one of the most crucial internal parts of the unit.

Q Moisture condensation may occur in the following

situations:

When you move the unit from a cold area to a warm area. When you use the unit in a room in which the heat

was just turned on.

When you use the unit in an area where cold air from

an air conditioner directly hits the unit.

When you use the unit in a humid area.

Optical pick-up

lens

On handling discs

Do not touch the playback side of the disc.

For example, handle the disc so that it is shown in ﬁ gure below.

Do not attach paper or tape to discs.

Playback side

On cleaning discs

Fingerprints and dust on the disc cause picture and

sound deterioration. Wipe the disc from the center outwards with a soft cloth. Always keep the disc clean.

Do not use any type of solvent such as thinner,

benzine, commercially available cleaners or antistatic spray for vinyl LPs. It may damage the disc.

On storing discs

Do not store discs in a place subject to direct sunlight

or near heat sources.

Do not store discs in places subject to moisture and

dust such as a bathroom or near a humidiﬁ er .

Store discs vertically in a case. Stacking or placing

objects on discs outside of their case may cause warping.

Introduction

Q Never use the unit when moisture condensation may occur

Using the unit when moisture condensation exists may damage discs and internal parts. Connect the power cord of the unit to the wall outlet, turn on the unit, remove the disc, and leave it for two or three hours. After two or three hours, the unit will have warmed up and evaporated any moisture. Leaving the TV connected to the wall outlet will help prevent moisture condensation in the TV or DVD Player.

Wait!

Wall outlet

J50S0101A.indb 7

Structure of disc contents

Normally, DVD video discs are divided into titles, and the titles are sub-divided into chapters. Video CDs and Audio CDs are divided into tracks.

DVD video disc

Title 1 Title 2

Chapter 1 Chapter 2 Chapter 1 Chapter 2 Chapter 3

Video CD/Audio CD

Track 1 Track 2 Track 3 Track 4 Track 5

Each title, chapter or track is assigned a number, which is called “title number”, “chapter number” or “track number” respectively. There may be discs that do not have these numbers.

08.1.9 4:44:50 PM

Introduction

J50S0101A.indb 8

08.1.9 4:44:50 PM

Notes on discs (Continued)

Notes on copyright

The unauthorized recording, use, distribution, or revision of copyrighted materials including, without limitation, television programs, videotapes, and DVDs, is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.

This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

About this owner·s manual

This owner·s manual explains the basic instructions of this unit. Some DVD video discs are produced in a manner that allows speciﬁ c or limited operation during playback. As such, the unit may not respond to all operating command. This is not a defect in the unit. Refer to instruction notes of discs.

The following symbol may appear on the TV screen during operation.

It means that the operation is not permitted by the TV/DVD or the disc. For example, sometimes it is unable to stop the playback of copyright message of the disc when the STOP (Q) button is pressed. Alternatively, this symbol may also indicate that the feature is not available for the disc.

Notes on region numbers

The region number of this unit is 1. If region numbers, which stand for their playable area, are printed on your

ALL

DVD video disc and you do not ﬁ nd

, disc playback will not be allowed by the player. (In this case, the unit will display a message on-screen.) Some DVDs that have no region code label may still be subject to area restrictions and therefore not playable.

On Video CDs

This unit supports Video CDs equipped with the PBC (Version 2.0) function. (PBC is the abbreviation of Playback Control.) You can enjoy two playback variations depending on types of discs.

•

Video CD not equipped with PBC function (Version 1.1)

Sound and movie can be played on this unit in the same way as a DVD.

•

Video CD equipped with PBC function (Version 2.0)

In addition to operation of a Video CD not equipped with the PBC function, you can enjoy playback of interactive software with search function by using the menu displayed on the TV screen (Menu Playback). Some of the functions described in this owner·s manual may not work with some discs.

Playable discs

This unit can play the following discs.

Disc Mark Contents

DVD video discs

Video

CDs

DIGITAL VIDEO

Audio

CDs

DivX

The following discs are also available.

DVD-R/RW discs of DVD video format CD-R/CD-RW discs of CD-DA, Video CD, MP3, WMA,

JPEG or DivX® format

Kodak Picture CD and FUJICOLOR CD format

Some of these discs may be incompatible.

Audio Video

(moving

pictures)

Audio Video

(moving

pictures)

Audio

Audio Video

(moving

pictures)

Disc Size

12 cm

8 cm

12 cm

8 cm

12 cm

8 cm

12 cm

8 cm

• You cannot play discs other than those listed above.

• You cannot play discs of DVD-RAM, DVD-ROM, CD ROM, Photo CD, etc., or non standardized discs even if they may be labeled as above.

• Some CD-R/RWs cannot be played back depending on the recording conditions.

• This unit uses the NTSC color system, and cannot play DVD video discs recorded in any other color system (PAL, SECAM, etc.).

• This unit can play an 8cm disc. Please do not use a disc adapter. It may cause trouble.

• Please do not insert any disc of an irregular shape into the unit, as it may interfere with the function of the unit.

You may not be able to remove it.

• Please do not use after market accessories, such as a

ring protector, as this may cause trouble with the operation of the unit.

Because of problems and errors that can occur during the creation of DVD and CD Software and/or the manufacture of DVD and CD discs, Toshiba cannot assure that the DVD player contained in this TV will successfully play every disc bearing the DVD and CD logos. If you happen to experience any difﬁ culty playing a DVD and/or CD disc on the DVD player contained in this TV, please contact Toshiba Customer Service.

is a trademark of DVD Format/Logo Licensing

Corporation.

Maximum

playback time

Approx. 4 hours

(single sided disc)

Approx. 8 hours

(double sided disc)

Approx. 80 minutes

(single sided disc)

Approx. 160 minutes

(double sided disc)

Approx. 74 minutes

(single sided disc)

Approx. 20 minutes

(single sided disc)

Approx. 74 minutes

(single sided disc)

Approx. 20 minutes

(single sided disc)

It depends on DivX

quality

J50S0101A.indb 8

08.1.9 4:44:50 PM

Contents

J50S0101A.indb 9

08.1.9 4:44:51 PM

Introduction

SAFETY INSTRUCTIONS ................................4

Precautions.......................................................6

Notes on discs ..................................................7

Contents ...........................................................9

Identiﬁ cation of controls ..................................10

Connections

Antenna connections ......................................14

Cable TV connections ....................................15

Connecting to optional equipment ..................16

Power source..................................................20

Basic setup

Auto setup ......................................................21

Setting the language.......................................22

To memorize channels.................................... 23

TV operation

TV operation ...................................................26

Labeling channels...........................................28

Labeling video inputs ......................................29

Setting the V-Chip...........................................30

Setting the closed captions.............................34

CC advanced ..................................................35

Adjusting the picture preference .....................36

Picture settings ...............................................36

Viewing the wide-screen picture formats ........37

Film Mode .......................................................38

DNR ................................................................38

Picture control adjustment in the PC mode .... 39

Sound control adjustment ...............................40

Selecting Stereo/Second Audio Program (SAP) ....40

Selecting the audio language ......................... 41

Selecting the HDMI audio input source .......... 41

Using the aspect feature.................................42

Adjusting the back lighting ..............................42

Setting the Auto Shut Off ................................ 43

Resetting your settings ...................................43

Basic playback

Playing a disc .................................................44

Advanced playback

Zooming.......................................................... 47

Locating desired scene................................... 47

Marking desired scenes..................................48

Repeat playback ............................................. 49

A-B Repeat playback ...................................... 49

Program playback........................................... 50

Random playback ........................................... 50

Changing angles..............................................51

Title selection ...................................................51

DVD menu .......................................................51

Changing soundtrack language .......................52

Subtitles ...........................................................52

Disc status .......................................................53

To turn off the PBC ..........................................53

MP3/WMA/JPEG/DivX

and Audio CD operation ..................................54

Repeat, random and program playback

using ﬁ le browser.............................................58

Function setup

Customizing the function settings ....................60

Temporary cancel the rating level

by DVD disc .....................................................65

Others

Understanding the Power Return feature ........66

Troubleshooting ...............................................66

Reception disturbances ...................................68

Language code list ..........................................69

Speciﬁ cations ..................................................70

Limited United States Warranty .......................71

Introduction

J50S0101A.indb 9

08.1.9 4:44:51 PM

Introduction

J50S0101A.indb 10

08.1.9 4:44:52 PM

Identiﬁ cation of controls

Front

Side

Disc slot

Speaker

Remote sensor

Left Side

POWER indicator

EJECT button

VOLUME (+/–) buttons CHANNEL

PLAY button

CHANNEL QSTOP button

MENU button

INPUT/ENTER button

22 60

Illustration of 19LV505

Adjusting the angle of the base

Approx. 10°

Approx. 3°

You can adjust the angle of the TV-screen for 3° forward or for 10° backward from vertical angle. Hold the base of the TV while adjusting the angle.

J50S0101A.indb 10

POWER button

Illustration of 19LV505

08.1.9 4:44:52 PM

Rear

J50S0101A.indb 11

08.1.9 4:44:54 PM

Introduction

AC INLET

HEAD PHONE jack

COMPONENT VIDEO/AUDIO IN jacks

VIDEO/S-VIDEO/AUDIO IN jack

J50S0101A.indb 11

Antenna jack

14 15

COAXIAL DIGITAL AUDIO

HDMI IN jack

PC AUDIO IN jack

OUT jack

16 17

PC MONITOR IN jack

18 19

Illustration of 19LV505

08.1.9 4:44:54 PM

Introduction

J50S0101A.indb 12

08.1.9 4:44:56 PM

Identiﬁ cation of controls (Continued)

Remote control

The instructions in this manual describe the function on the remote control. See the page in for details.

EJECT button

TV/DVD button

Direct channel selection buttons (0

Numbered buttons (0

DISPLAY button

CH / button

SUBTITLE button

INPUT button ZOOM button

PLAY MODE button

PLAY button

MENU button

SETUP button

PAUSE button

CH RTN button

SKIP ( ) button

REV button

SLOW ( ) button

TOP MENU button

RETURN button

GAME button

49 53

FF button

5327

POWER button SLEEP button

JUMP button Direct channel selection button ( )

AUDIO SELECT button VOL +/– button

16 47

MUTE button

*DVD MENU button

ENTER button

27 46

46 46

6055

Direction buttons ( / / / )

EXIT/CANCEL button

STOP button CLOSED CAPTION button

SKIP ( )button

SLOW ( ) button MARKER button ANGLE button

REPEAT A-B button

PIC SIZE button

*DVD MENU button

Use the DVD MENU button to display the menu included on many DVD video discs. To operate a menu, follow the instructions in “DVD menu.”

J50S0101A.indb 12

SE-R0305

08.1.9 4:44:56 PM

Inserting batteries

J50S0101A.indb 13

08.1.9 4:44:57 PM

Introduction

Open the battery compartment

cover in the direction of the arrow.

Install two “R03/AAA” batteries

(supplied), paying attention to the polarity indicated in the battery compartment.

Replace the compartment cover.

Operation

• Aim the remote control at the remote sensor and press control buttons to operate.

•

Operate the remote control within 30° angle on either side of the remote sensor, up to a distance of approx. 5 meters.

Approx. 5 meters

Caution:

• Never throw batteries into a ﬁ re.

Note:

• Be sure to use AAA size batteries.

• Dispose of batteries in a designated disposal area.

•

Batteries should always be disposed of with the environment in mind. Always dispose of batteries in accordance with applicable laws and regulations.

• If the remote control does not operate correctly, or if the operating range becomes reduced, replace batteries with new ones.

• When necessary to replace batteries in the remote control, always replace both batteries with new ones.

Never mix battery types or use new and used batteries in combination.

•

Always remove batteries from remote control if they are dead or if the remote control is not to be used for an extended

period of time. This will prevent battery acid from leaking into the battery compartment.

J50S0101A.indb 13

08.1.9 4:44:57 PM

Connections

J50S0101A.indb 14

08.1.9 4:44:57 PM

Antenna connections

If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using a cable TV service (CABLE), see page 15 for Cable TV connections.

Combination VHF/UHF antenna (Single 75 ohm cable or 300 ohm twin-lead wire)

Antenna

jack

Antenna

jack

Connect the 75 ohm cable from the combination VHF/UHF antenna to the antenna jack on the back of the TV/DVD.

If your combination VHF/UHF antenna has a 300

75 ohm coaxial cable (not supplied)

300-75 ohm matching transformer (not supplied)

ohm twin-lead wire, use the 300-75 ohm matching transformer (not supplied).

Combination VHF/UHF antenna (Separate VHF and UHF 300 ohm twin-lead wires)

Antenna

jack

Combiner (not supplied)

300-75 ohm matching transformer (not supplied)

Connect the UHF 300 ohm twin-lead wire to the combiner (not supplied). Connect the VHF 300 ohm twin-lead wire to the 300-75 ohm matching transformer (not supplied). Attach the transformer to the combiner , then attach the combiner to the antenna jack on the back of the TV/DVD.

Separate VHF/UHF antennas (75 ohm VHF cable and 300 ohm UHF twin-lead wires)

J50S0101A.indb 14

UHF 300 ohm twin-lead wire (not supplied)

Antenna

jack

Combiner (not supplied)

UHF 300 ohm twin-lead wire (not supplied)

VHF 300 ohm twin-lead wire (not supplied)

VHF 75 ohm (not supplied)

Connect the VHF 75 ohm cable and UHF 300 ohm twin-lead wire to the combiner (not supplied). Attach the combiner to the antenna jack on the back of the TV/DVD.

08.1.9 4:44:57 PM

Cable TV connections

J50S0101A.indb 15

08.1.9 4:44:58 PM

This TV/DVD has an extended tuning range and can tune most cable channels without using a Cable TV converter box. Some cable companies offer “premium pay channels” in which the signal is scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device which is generally provided by the cable company.

For subscribers to basic cable TV service

Antenna

jack

75 ohm coaxial cable

For basic cable service not requiring a converter/descrambler box, connect the Cable TV 75 ohm coaxial cable directly to the Antenna jack on the back of the TV/DVD.

For subscribers to scrambled cable TV service

If you subscribe to a cable TV service which requires the use of a converter/descrambler box, connect the incoming 75 ohm coaxial cable to the converter/descrambler box. Using another 75 ohm coaxial cable, connect the output jack of the converter/descrambler box to the antenna jack on the TV/DVD. Follow the connections shown below. Set the TV/DVD to the output channel of the converter/descrambler box (usually channel 3 or 4) and use the converter/descrambler box to select channels.

Incoming 75 ohm

Cable TV

Converter/

descrambler

75 ohm cable to

TV/DVD

Antenna

jack

Connections

For subscribers to unscrambled basic cable TV service with scrambled premium channels

If you subscribe to a cable TV service in which basic channels are unscrambled and premium channels require the use of a converter/descrambler box, you may wish to use a signal splitter and an A/B Switch box (available from the cable company or an electronics supply store). Follow the connections shown below. With the switch in the “B” position, you can directly tune any nonscrambled channels on your TV/DVD. With the switch in the “A” position, tune your TV/DVD to the output of the converter/descrambler box (usually channel 3 or 4) and use the converter/descrambler box to tune scrambled channels.

Converter/

descrambler

A/B switch

75 ohm cable

to TV/DVD

Antenna

jack

J50S0101A.indb 15

Incoming 75 ohm Cable TV

Splitter

08.1.9 4:44:58 PM

Connections

J50S0101A.indb 16

08.1.9 4:44:59 PM

Connecting to optional equipment

Y ou can enjoy VCR, camcorder or TV game with connection to external input.

Using the audio/video inputs

Press INPUT to view a signal from another device connected to your TV/DVD, such as a VCR player. You can select TV, Video, ColorStream HD, HDMI or PC depending on which input jacks you used to connect your devices.

Press INPUT on the remote control to display the current signal source. To change the input source, press INPUT again or press 0-4. (5 is for selection DVD mode.)

Connecting to a VCR

To playback from the VCR, connect the VCR to the TV/DVD as shown. Select the “Video” by pressing INPUT repeatedly.

: Signal ﬂ ow

VCR

T o Audio/Video OUT

Audio/Video cable (not supplied)

(yellow)

(white)

(red)

Back side

0-5 CH /

INPUT

GAME

Source Selection

0.TV

1.Video

2.ColorStream HD

3.HDMI

4.PC

5.DVD

[0-5]:Select

To VIDEO/AUDIO(L/R) IN

Connecting to a camcorder

To playback from the camcorder, connect the camcorder to the TV/DVD as shown. Select the “Video” by pressing INPUT repeatedly.

: Signal ﬂ ow

Camcorder

T o Audio/Video OUT

Audio/Video cable (not supplied)

(yellow)

(white)

(red)

Back side

To VIDEO/AUDIO(L/R) IN

Connecting to a TV Game

You can enjoy playing a TV game on the screen by adjusting to the suitable brightness for your eyes.

1. Connect a TV Game to the TV/DVD.

2. Select the Game mode by pressing GAME. The Game mode screen appears.

• If GAME is pressed during standby mode, the unit turns on automatically and the Game mode screen appears on the screen.

: Signal ﬂ ow

T o Audio/Video OUT

Audio/Video cable (not supplied)

Note:

• You can also change the TV/DVD screen to the desired mode by pressing the CH / .

• The TV/DVD can also be used as a display device for many video games. However, due to the wide variety of

different types of signal generated by these devices and subsequent hook-up variations required, they have not all been included in the suggested connection diagrams. You·ll need to consult each component·s Owner·s Manual for additional information.

• Interactive video games that involve shooting a “gun” type of joystick at on-screen target may not work on this

TV/DVD.

(yellow)

(white)

(red)

Back side

To VIDEO/AUDIO(L/R) IN

J50S0101A.indb 16

08.1.9 4:44:59 PM

Connecting to an optional equipment with S-video output

J50S0101A.indb 17

08.1.9 4:45:00 PM

If you connect a VCR with an S-Video cable to the S-VIDEO IN jack on the left side of the TV/DVD, you must also connect the audio cables to the AUDIO IN jacks as shown below. The S-Video cable only carries the video signal. The audio signal is separated. Select the “Video” by pressing INPUT repeatedly.

: Signal ﬂ ow

Ex. VCR with S-Video

To S-VIDEO IN

(white)

To AUDIO (L/R) IN

Back side

(playback)

To S-VIDEO OUT

To Audio (L/R) OUT

S-Video cable (not supplied)

Audio cable (not supplied)

(red) To S-VIDEO/AUDIO(L/R) IN

Note:

When the S-Video cable and the standard video cable are connected at the same time, the S-video cable takes

•

precedence.

Connecting an optional equipment with ColorStream

Your TV/DVD is capable of using ColorStream® (component video). Connecting your TV/DVD to a component video compatible DVD player, such as a Toshiba DVD player with ColorStream

(Component video) output

can greatly enhance picture quality and performance. Select the “ColorStream HD” by pressing INPUT repeatedly.

Connections

(white)

Back side

(red)

To COMPONENT AUDIO (L/R) IN

: Signal ﬂ ow

To Audio (L/R) OUT

Ex. DVD player with Component video

To COMPONENT

(Y, PB, PR) IN

To Component Video OUT

Component video cable

(not supplied) Audio cable (not supplied)

When using the Component video cable, an Audio cable must be connected to COMPONENT AUDIO(L/R) IN jacks.

Note:

• The ColorStream

(COMPONENT) inputs on this unit are for use with devices that output 480i, 1080i inter-

laced signals and 480p, 720p progressive signals.

• Refer to the owner·s manual of the connected equipment as well.

• When you connect the unit to other equipment, be sure to turn off the power and unplug all of the equipment

from the wall outlet before making any connections.

• If you place the unit near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the

unit away from the tuner and radio.

J50S0101A.indb 17

08.1.9 4:45:00 PM

Connections

J50S0101A.indb 18

08.1.9 4:45:02 PM

Connecting to optional equipment (Continued)

You can enjoy high quality dynamic sounds by connecting the TV/DVD to optional audio equipment.

Connecting to an ampliﬁ er equipped with a Dolby® Digital decoder

Dolby Digital

Dolby Digital is the surround sound technology used in theaters showing the latest movies, and is now available to reproduce this realistic effect in the home. You can enjoy motion picture and live concert DVD video discs encoded via the Dolby Digital recording system with this dynamic realistic sound by connecting the TV/DVD to a 6 channel ampliﬁ er equipped with a Dolby Digital decoder or Dolby Digital processor. If you have a Dolby Surround Pro Logic decoder, you will obtain the full beneﬁ t of Pro Logic from the same DVD movies that provide full 5.1-channel Dolby Digital soundtracks, as well as from titles with the Dolby Surround mark.

Ampliﬁ er equipped with a

Dolby Digital decoder

This section uses the following reference mark.

: Front speaker : Rear speaker

: Center speaker : Signal ﬂ ow

: Sub woofer

Back side

To COAXIAL DIGITAL AUDIO OUT

To COAXIAL type digital audio input

75 Ω coaxial cable (not supplied)

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

Connecting to an ampliﬁ er equipped with a DTS® decoder

Digital Theater Systems (DTS)

DTS is a high quality surround technology used in theaters and now available for home use, on DVD video discs or audio CDs. If you have a DTS decoder or processor, you can obtain the full beneﬁ t of 5.1 channel DTS encoded sound tracks on DVD video discs or audio CDs.

Ampliﬁ er equipped with

a DTS decoder

To COAXIAL type digital audio input

75 Ω coaxial cable (not supplied)

Back side

To COAXIAL DIGITAL AUDIO OUT

Manufactured under license under U.S. Patent #: 5,451,942 & other U.S. and worldwide patents issued & pending. DTS and DTS Digital Out are registered trademarks and the DTS logos and Symbol are trademarks of DTS, Inc. © 1996-2007 DTS, Inc. All Rights Reserved.

Connecting to an ampliﬁ er equipped with an MPEG audio decoder

MPEG2 sound

You can enjoy motion picture and live concert DVD video discs encoded via the MPEG2 recording system with dynamic realistic sound by connecting an ampliﬁ er equipped with an MPEG2 audio decoder or MPEG2 audio processor.

J50S0101A.indb 18

Ampliﬁ er equipped with an

MPEG2 audio decoder

To COAXIAL type digital audio input

Back side

75 Ω coaxial cable (not supplied)

To COAXIAL DIGITAL AUDIO OUT

08.1.9 4:45:02 PM

Connecting to an ampliﬁ er equipped with a digital audio input

J50S0101A.indb 19

08.1.9 4:45:03 PM

2 channel digital stereo

You can enjoy the dynamic sound of 2 channel digital stereo by connecting an ampliﬁ er equipped with a digital audio input and speaker system (right and left front speakers). Note: PCM audio is limited to DVD or CD playback.

Ampliﬁ er equipped with a

Digital audio input

To COAXIAL type digital audio input

Back side

To COAXIAL DIGITAL AUDIO OUT

75 Ω coaxial cable (not supplied)

Note:

• DO NOT connect the COAXIAL DIGITAL AUDIO OUT jack of the TV/DVD to the AC-3 RF input of a Dolby Digital Receiver. This input on your A/V Receiver is reserved for Laserdisc use only and is incompatible with the COAXIAL DIGITAL AUDIO OUT jack of the TV/DVD.

• Connect the COAXIAL DIGITAL AUDIO OUT jack of the TV/DVD to the “COAXIAL” input of a Receiver or Processor.

• Refer to the owner·s manual of the connected equipment as well.

• When you connect the TV/DVD to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections.

The output sound of the TV/DVD has a wide dynamic range. Be sure to adjust the receiver·s volume to a moderate listening level.

• Otherwise, the speakers and your hearing may be damaged by a sudden high volume sound.

• Turn off the ampliﬁ er before you connect or disconnect the TV/DVD·s power cord. If you leave the ampliﬁ er·s power on, the speakers may be damaged.

Connecting to an HDMI or a DVI device

About HDMI

HDMI (High Deﬁ nition Multimedia Interface) supports both video and audio on a single digital connection for use with DVD players, DTV, set-top boxes, and other AV devices. HDMI was developed to provide the technologies of High Bandwidth Digital Content Protection (HDCP) as well as Digital Visual Interface (DVI) in one speciﬁ cation. HDCP is used to protect digital content transmitted and received by DVI-compliant or HDMI-compliant displays.

HDMI has the capability to support standard, enhanced, or highdeﬁ nition video plus standard to multi-channel surround-sound audio. HDMI features include uncompressed digital video, a bandwidth of up to 2.2 gigabytes per second (with HDTV signals), one connector (instead of several cables and connectors), and communication between the AV source and AV devices such as DTVs.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC.

Back side

Connections

DVI device

HDMI device

To DVI output

Audio cord (not supplied)

To HDMI out

To PC AUDIO IN

HDMI - to - DVI adapter cable

(HDMI type A connector)

(not supplied)

HDMI cable (type A connector)

(not supplied)

To HDMI IN

Note:

You must select the corresponding audio input source (HDMI or DVI) on the menu screen (see ”Selecting the HDMI audio

•

input source” on page 41). Otherwise you will only see the image with no sound.

J50S0101A.indb 19

08.1.9 4:45:03 PM

Connections

J50S0101A.indb 20

08.1.9 4:45:03 PM

Connections

Connecting to optional equipment (Continued)/ Power source

Connecting to a PC (Personal Computer)

Before you connect this TV/DVD to your PC, change the adjustment of your PC’s Resolution and Refresh rate (60 Hz). Connect one end of a (male to male) VGA cable to the video card of the computer and the other end to the MONITOR on the rear of the connect the audio cord to the audio output of your Multimedia computer and to the AUDIO connector of the PC AUDIO IN jack of the TV/DVD . Select “PC” by pressing INPUT repeatedly. Switch on the computer. The TV/DVD can operate as the computer monitor

To PC MONITOR IN

Note:

The on-screen displays will have a different appearance in PC mode than in TV mode.

• If there is no video signal from the PC when the unit is in PC mode, “No signal” will appear on the TV/DVD-screen.

•

TV/DVD

Back side

To PC AUDIO IN jack

Audio cord (not supplied)

VGA cable (not supplied)

. Attach the connectors firmly with the screws on the plug.

Monitor Display modes

MODE Resolution Refresh rate VGA 640x480 60Hz VGA 720x400 70Hz SVGA 800x600 60Hz XGA 1024x768 60Hz WXGA 1280x768 60Hz WXGA 1280x720 60Hz WXGA 1360x768 60Hz

To return to normal mode

Press INPUT again.

In case of a Multimedia computer,

VGA connector PC

Power source

To use AC power source

Connect the AC cord plug into this TV/DVD’s AC INPUT jack.

1. Connect the AC cord into an AC outlet.

Illustration of 19LV505

Wider Hole and Blade

AC 120V, 60Hz

AC cord (supplied)

Note:

Never connect the AC line cord plug to other than the specified voltage (120V 60Hz). Use the attached power cord only.

• If the polarized AC cord does not fit into a non-polarized AC outlet, do not attempt to file or cut the blade. It is the user’s

• responsibility to have an electrician replace the obsolete outlet. If you cause a static discharge when touching the unit and the unit fails to function, simply unplug the unit from the AC outlet

• and plug it back in. The unit should return to normal operation. If the AC cord plug is plugged in for the first time, wait for approx. 5 seconds before pressing POWER.

•

AC Outlet

J50S0101A.indb 20

08.1.9 4:45:03 PM

Basic setup

J50S0101A.indb 21

08.1.9 4:45:05 PM

Auto Setup

The Auto Setup function helps to install your TV/DVD easily. It leads you the Language selection, Air/Cable selection and Automatic channel search.

IMPORTANT: Make sure that the antenna or cable TV system connection is made!

Auto Setup

To turn on the TV/DVD, press POWER.

POWER indicator on the front of the unit

•

changes green. It may take approx. 10 seconds for a picture to appear on screen.

Auto Setup menu appears on the screen. Press ϳ or ϴ to select “Language”, then press ϵ or ϶ to select your desired language.

Auto Setup

Language

Signal Type Air

Automatic Search

English

Start

Now the “Automatic Search” starts.

If you press EXIT/CANCEL, the Automatic

• Search stops and changes to the TV screen. After the starting setup is completed, the TV

•

channel appears on the screen.

Auto Setup

Language

Signal Type Air

Automatic Search

Analog Channel Found : 0

Digtal Channel Found :

POWER

ENTER

/ / /

EXIT/CANCEL

Basic setup

English

Start

EXIT : End

: Select

Press ϳ or ϴ to select “Signal Type”, then press ϵ or ϶ to select “Air” or “Cable”.

Auto Setup

Language

Signal Type Air

Automatic Search

: Select

Air - VHF/UHF channels Cable

- Cable TV channels

Press ϳ or ϴ to select “Automatic Search”, then press ENTER.

Auto Setup

Language

Signal Type Air

Automatic Search

: Adjust

English

Start

English

Start

Note:

The Auto Setup function will work only when you

• press POWER for the first time. The process of “Automatic Search” may take 15 to

• 30 minutes to complete, depending on your regional cable service.

J50S0101A.indb 21

: Select

: Adjust

08.1.9 4:45:05 PM

Basic setup

J50S0101A.indb 22

08.1.9 4:45:06 PM

Setting the language

This TV/DVD can display the on screen language in English, French or Spanish. Select the language you prefer ﬁ rst, then proceed with the other menu options.

Setting the language

To turn on the TV/DVD, press POWER.

POWER indicator on the front of the unit

•

changes green. It may take approx. 10 seconds for a picture to appear on screen.

Press MENU. The TV menu screen will appear. Press ϳ or ϴ to select “Setup”, then press ϶ or ENTER.

Main Menu

Picture

Audio

Channel

Lock

Setup

: Select ENTER:Set

Press ϳ or ϴ to select “Language”.

Setup

Closed Caption >>

Language English

Video Label >>

Backlight

Auto Shut Off

Aspect

Reset >>

: Select

: Adjust

Off On

Press ϵ or ϶ to select the desired language: English, French (Français) or Spanish

(Español).

Press EXIT/CANCEL to return to the normal screen.

Note:

If the unit does not operate properly, or No key

• operation (by the unit and/or the remote control):

Static electricity, etc., may affect the TV/DVD’s operation. In such case, disconnect the AC cord once, then connect it again.

•

If no buttons are pressed for more than about 60 seconds, the MENU screen will return to normal operation automatically.

POWER

MENU ENTER

/ / /

EXIT/CANCEL

J50S0101A.indb 22

08.1.9 4:45:06 PM

+ 50 hidden pages